SAE J576_201002
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Plastic Material or Materials for Use in Optical Parts Such as Lenses and Reflex Reflectors of Motor Vehicle Lighting Devices
Available format(s)
Hardcopy , PDF
Superseded date
07-08-2017
Superseded by
Language(s)
English
Published date
15-02-2010
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This SAE Recommended Practice provides test methods and requirements to evaluate the suitability of plastic material or materials intended for optical applications in motor vehicles. The tests are intended to determine physical and optical characteristics of the material or materials only. Performance expectations of finished assemblies, including plastic components, are to be based on tests for lighting devices, as specified in SAE Standards and Recommended Practices for motor vehicle lighting equipment. Field experience has shown that plastic material or materials meeting the requirements of this document and molded in accordance with good molding practices will produce durable lighting devices.
| BS EN ISO 877-3:2010 | Plastics. Methods of exposure to solar radiation Intensified weathering using concentrated solar radiation |
| SAE J2595_201509 | Performance Requirements for Sealed Beam Motor Vehicle Headlamps |
| I.S. EN ISO 877:1997 | |
| 16/30344238 DC : 0 | BS EN ISO 877-3 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION |
| UNI EN ISO 877-3 : 2011 | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFICATION WEATHERING USING CONCENTRATED SOLAR RADIATION |
| A-A-52418 Revision A:2010 | LIGHT, WARNING, VEHICULAR: ROTATING UNIT, 14 AND 28 VOLT DC |
| SAE J774_201102 | Emergency Warning Device and Emergency Warning Device Protective Container |
| SAE J584_201009 | Motorcycle Headlamps |
| MIL PRF 62180 : D | SEMITRAILER, FUEL TANKERS: 5000 GALLON, BULKHAUL, AUTOMOTIVE AND AIRCRAFT FUEL SERVICING |
| SAE J131_201006 | Motorcycle Turn Signal Lamps |
| 07/30155380 DC : 0 | BS ISO 877-3 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION |
| MIL-DTL-62180 Revision E:1998 | SEMITRAILER, FUEL TANKERS: 5000 GALLON, BULKHAUL, AUTOMOTIVE AND AIRCRAFT FUEL SERVICING |
| SAE J2838_201303 | Full Adaptive Forward Lighting Systems |
| SAE J586_201605 | Stop Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width |
| ASTM D 788 : 2016 : REDLINE | Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds |
| SAE J887_201507 | School Bus Warning Lamp |
| SAE J3069_201606 | Adaptive Driving Beam |
| SAE J1647_201501 | Plastic Materials and Coatings for Use In or On Optical Parts Such as Lenses and Reflectors of High-Intensity Discharge Forward Lighting Devices Used in Motor Vehicles |
| SAE J3098_201706 | Front Decorative Lamp |
| SAE J1319_201510 | Rear Fog Lamp Systems |
| DIN EN ISO 877-3:2016-09 (Draft) | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION |
| SAE J1133_201507 | School Bus Stop Arm Lamp |
| SAE J1306_201209 | Motorcycle Auxiliary Front Lamps |
| ASTM D 5105 : 2005 : R2019 | Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight |
| SAE J592_200903 | Sidemarker Lamps for Use on Road Vehicles Less than 2032 mm in Overall Width |
| SAE J914_201408 | Side Turn Signal Lamps for Vehicles Less than 12 m in Length |
| SAE J595_201403 | Directional Flashing Optical Warning Devices for Authorized Emergency, Maintenance, and Service Vehicles |
| SAE J587_201711 | License Plate Illumination Devices (Rear Registration Plate Illumination Devices) |
| SAE J2040_201601 | Tail Lamps (Rear Position Lamps) for Use on Vehicles 2032 mm or More in Overall Width |
| SAE J2042_201402 | Clearance, Sidemarker, and Identification Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width |
| ASTM D 5105 : 2005 : R2011 | Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight |
| SAE J593_201606 | Backup Lamp (Reversing Lamp) |
| ISO 877:1994 | Plastics Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors |
| SAE J1383_201005 | Performance Requirements for Motor Vehicle Headlamps |
| SAE J2139_201412 | Tests for Signal and Marking Devices Used on Vehicles 2032 mm or More in Overall Width |
| KKK-A-1822 Revision E:2002 | STAR-OF-LIFE AMBULANCE |
| SAE J2087_201708 | Daytime Running Light |
| A-A-52428 Revision A:1997 | REFLECTOR, INDICATING, CLEARANCE |
| ISO 877-3:2009 | Plastics Methods of exposure to solar radiation Part 3: Intensified weathering using concentrated solar radiation |
| MIL-PRF-32212 Revision A:2009 | LIGHT EMITTING DIODE (LED) COMPOSITE STOP, REAR TURN SIGNAL AND TAIL LAMPS WITH INFRA-RED SECURE BLACKOUT TAIL AND BLACKOUT STOP LAMPS |
| MIL-PRF-32243 Base Document:2009 | Light Emitting Diode (LED) Military Driving Headlamp |
| SAE J845_201306 | Optical Warning Devices for Authorized Emergency, Maintenance, and Service Vehicles |
| SAE J2261_201607 | Stop Lamps and Front- and Rear-Turn Signal Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width |
| SAE J2039_201401 | Side Turn Signal Lamps for Long Vehicles |
| SAE J1373_201510 | Rear Cornering Lamps for Use on Motor Vehicles Less than 9.1 m in Overall Length |
| NFPA 1917 : 2016 | AUTOMOTIVE AMBULANCES |
| SAE J1432_201601 | Rear High Mounted Stop Lamps and Rear High Mounted Turn Signal Lamps for Use on Vehicles 2032 mm or More in Overall Width |
| SAE J583_201609 | Front Fog Lamp |
| ASTM D 5105 : 2005 | Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight |
| I.S. EN ISO 877-3:2010 | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION |
| EN ISO 877:1996 | Plastics - Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors (ISO 877:1994) |
| SAE J222_201303 | Front Position Lamp |
| MIL-PRF-32214 Base Document:2009 | LIGHT EMITTING DIODE (LED) COMPOSITE FRONT PARK AND TURN SIGNAL LAMP, WITH INFRA-RED SECURE FRONT BLACKOUT MARKER LAMP |
| MIL-PRF-32215 Revision A:2009 | Light Emitting Diode (LED) Infra-Red Secure Blackout Front Driving Lamp |
| SAE J585_201406 | Tail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less than 2032 mm in Overall Width |
| UNE-EN ISO 877-3:2011 | Plastics - Methods of exposure to solar radiation - Part 3: Intensified weathering using concentrated solar radiation (ISO 877-3:2009) |
| SAE J2510_200312 | Harmonized Front Fog Lamp |
| SAE J2041_201310 | Reflex Reflectors for Use on Vehicles 2032 mm or More in Overall Width |
| SAE J852_201707 | Front Cornering Lamps for Use on Motor Vehicles |
| SAE J1424_201403 | Cargo Lamps for Use on Vehicles Under 5443 kg (12 000 lb) GVWR |
| SAE J2642_201707 | Recommended Practice for Developing Specifications for Automotive Thermoplastic Materials |
| ASTM G 90 : 2017 : REDLINE | Standard Practice for Performing Accelerated Outdoor Weathering of Materials Using Concentrated Natural Sunlight |
| EN ISO 877-3:2010 | Plastics - Methods of exposure to solar radiation - Part 3: Intensified weathering using concentrated solar radiation (ISO 877-3:2009) |
| BS EN ISO 877:1997 | Plastics. Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors. |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.