SAE MA2150
Current
Current
The latest, up-to-date edition.
Clamps, Loop or P Style, Single Point Mount, Multiple Shapes, Metric
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
21-08-2015
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 SCOPE
2 REFERENCES
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PACKAGING
6 NOTES
Describes the requirements for metric loop or 'P' style clamps used for systems installation in aerospace equipment.
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
This aerospace specification establishes the requirements for metric loop or \"P\" style clamps used for systems installation in aerospace equipment.
| MIL L 7808 : K (1) | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| SAE MA 2150/2 : 1991 | CLAMP, LOOP STYLE, CUSHIONED, WITH WEDGE, PHOSPHATE ESTER FLUID RESISTANT, METRIC |
| PPP-B-665 Revision D:1972 | BOXES, PAPERBOARD, METAL EDGED AND COMPONENTS |
| SAE MA2156/3 | CLAMP, CENTER MOUNT, CUSHIONED, HIGH TEMPERATURE, METRIC |
| QQ-P-35 Revision C:1988 | PASSIVATION TREATMENTS FOR CORROSION-RESISTANT STEEL |
| SAE MA 2150/5 : 1991 | CLAMP, LOOP STYLE, WITH INSERT, HYDROCARBON FLUID RESISTANT, METRIC |
| SAE ARP1897 | Clamp Selection and Installation Guide |
| PPP-B-636 Revision J:1981 | BOX, SHIPPING, FIBERBOARD |
| SAE MA2155/3 | CLAMP, RECTANGULAR LOOP, CUSHIONED, WITH WEDGE, PHOSPHATE ESTER FLUID RESISTANT, ALUMINUM, METRIC |
| ASTM D 1149 : 2016-02 | TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT |
| MIL-H-6875 Revision H:1989 | HEAT TREATMENT OF STEEL RAW MATERIALS |
| PPP-B-566 Revision E:1974 | BOX, FOLDING, PAPERBOARD |
| SAE MA2150/7 | CLAMP, LOOP STYLE, WITH INSERT, HIGH TEMPERATURE, METRIC |
| SAE MA2155/4 | CLAMP, RECTANGULAR LOOP, CUSHIONED, WITH WEDGE, PHOSPHATE ESTER FLUID RESISTANT, STAINLESS STEEL, METRIC |
| SAE MA2153/2 | CLAMP, LOOP TYPE, BARE METAL, STAINLESS STEEL, METRIC |
| SAE MA2152/2 | CLAMP, CENTER MOUNT, BARE METAL, STAINLESS STEEL, METRIC |
| MIL T 5624 : R | TURBINE FUEL, AVIATION, GRADES JP 4 AND JP 5 |
| SAE MA2155/2 | CLAMP, RECTANGULAR LOOP, CUSHIONED, WITH WEDGE, HYDROCARBON FLUID RESISTANT, STAINLESS STEEL, METRIC |
| PPP-B-576 Revision C:1993 | BOX, WOOD-CLEATED PANELBOARD |
| SAE MA2150/6 | CLAMP, LOOP STYLE, WITH INSERT, PHOSPHATE ESTER FLUID RESISTANT, METRIC |
| SAE MA2156/2 | CLAMP, CENTER MOUNT, CUSHIONED, PHOSPHATE ESTER FLUID RESISTANT, METRIC |
| MIL-STD-831 Base Document:1963 | TEST REPORTS, PREPARATION OF |
| SAE MA2155/5 | CLAMP, RECTANGULAR LOOP, CUSHIONED, WITH WEDGE, HIGH TEMPERATURE, STAINLESS STEEL, METRIC |
| SAE AMS5510S | Steel, Corrosion and Heat-Resistant, Sheet, Strip and Plate 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated |
| SAE ARP1527B | Color Coding - Elastomers for Tube Clamp Cushions |
| PPP-B-676 Revision E:1992 | BOXES SET-UP |
| MIL H 83282 : C | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, AIRCRAFT, METRIC, NATO CODE NUMBER H 537 |
| PPP-B-591 Revision B:1971 | BOXES, SHIPPING, FIBERBOARD, WOOD-CLEATED |
| SAE AMS4945F | Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Controlled Contractile Strain Ratio Cold Worked, Stress Relieved |
| ASTM D 3182 : 2016 : REDLINE | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| SAE MA2153/1 | CLAMP, LOOP TYPE, BARE METAL, ALUMINUM, METRIC |
| MIL-STD-100 Revision G:1997 | ENGINEERING DRAWINGS |
| MIL-P-116 Revision J:1988 | PRESERVATION, METHODS OF |
| PPP-B-601 Revision H:1989 | BOXES, WOOD, CLEATED PLYWOOD |
| SAE MA 2150/1 : 1991 | CLAMP, LOOP STYLE, CUSHIONED, WITH WEDGE, HYDROCARBON FLUID RESISTANT, METRIC |
| SAE AMS5528H | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 17Cr - 7.1Ni - 1.1Al Solution Heat Treated, Precipitation Hardenable |
| MIL-H-6088 Revision G:1991 | HEAT TREATMENT OF ALUMINIUM ALLOYS |
| MIL H 5606 : G | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE |
| SAE MA2156/1 | CLAMP, CENTER MOUNT, CUSHIONED, HYDROCARBON FLUID RESISTANT, METRIC |
| SAE AMS4944L | Titanium Alloy Tubing, Seamless, Hydraulic 3.0Al - 2.5V Cold Worked, Stress Relieved |
| A-A-711 Base Document:1980 | DRY CLEANING SOLVENT |
| SAE MA2155/1 | CLAMP, RECTANGULAR LOOP, CUSHIONED, WITH WEDGE, HYDROCARBON FLUID RESISTANT, ALUMINUM, METRIC |
| PPP-B-621 Revision D:1981 | BOXES, WOOD, NAILED AND LOCK CORNER |
| SAE AS478N | Identification Marking Methods |
| SAE MA2152/1 | CLAMP, CENTER MOUNT, BARE METAL, ALUMINUM, METRIC |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| MIL-STD-105 Revision E:1989 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
| SAE MA2150/4 | CLAMP SUPPORT, LOOP CLAMP, METRIC |
| PPP-B-640 Revision D:1966 | BOX, FIBERBOARD, CORRUGATED, TRIPLE-WALL |
| PPP-B-585 Revision D:1992 | BOX, WOOD, WIREBOUND |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.