SAE MS1004_201710
Current
Current
The latest, up-to-date edition.
Lubricants, Industrial Oils, and Related Products Type H (Hydraulic Fluids) - Specification
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
18-10-2017
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
1. SCOPE
2. REFERENCES
3. CONCEPT
4. REQUIREMENTS AND TESTING
5. NOTES
Describes minimum performance requirements for industrial lubricants, where tests are available.
| DocumentType |
Standard
|
| Pages |
15
|
| ProductNote |
THIS STANDARD IS NOW STABILIZED
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
See Table 1.
| DIN 51759:1977-09 | TESTING OF LIQUID MINERAL OIL HYDROCARBONS; METHOD OF TEST FOR COPPER CORROSION, COPPER STRIP TEST |
| ASTM D 6973 : 2014 : REDLINE | Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump |
| ISO 3016:1994 | Petroleum products Determination of pour point |
| IP 71 : 1995 | SECTION 1: PETROLEUM PRODUCTS - TRANSPARENT AND OPAQUE LIQUIDS - DETERMINATION OF KINEMATIC VISCOSITY AND CALCULATION OF DYNAMIC VISCOSITY - SECTION 2: GLASS CAPILLARY KINEMATIC VISCOMETERS - SPECIFICATIONS AND OPERATING INSTRUCTIONS (TWO PART SET) |
| ASTM D 892 : 2013-07 | TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS |
| DIN 51566:1983-12 (Draft) | TESTING OF LUBRICANTS; DETERMINATION OF FOAMING CHARACTERISTICS |
| ASTM D 4951 : 2014 : REDLINE | Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry |
| ASTM D 2422 : 1997 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| ASTM D 2070 : 2017-02 | TEST METHOD FOR THERMAL STABILITY OF HYDRAULIC OILS |
| ASTM D 665 : 2014-11 | TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF INHIBITED MINERAL OIL IN THE PRESENCE OF WATER |
| ISO 4263:1986 | Petroleum products Inhibited mineral oils Determination of oxidation characteristics |
| DIN 51569:1978-12 | TESTING OF MINERAL OILS, LIQUID FUELS AND RELATED LIQUIDS; MEASUREMENT OF VISCOSITY USING THE VOGEL-OSSAG VISCOMETER; TEMPERATURE RANGE: -55 TO APPROXIMATELY + 10-DEG C |
| ISO 7120:1987 | Petroleum products and lubricants — Petroleum oils and other fluids — Determination of rust-preventing characteristics in the presence of water |
| ISO 6614:1994 | Petroleum products — Determination of water separability of petroleum oils and synthetic fluids |
| IP 334 : 2015 | DETERMINATION OF LOAD CARRYING CAPACITY OF LUBRICANTS - FZG GEAR MACHINE METHOD |
| ISO 6247:1998 | Petroleum products — Determination of foaming characteristics of lubricating oils |
| IP 166 : 77(R1992) | DETERMINATION OF LOAD-CARRYING CAPACITY OF LUBRICANTS - IAE GEAR MACHINE METHOD |
| ISO 2160:1998 | Petroleum products Corrosiveness to copper Copper strip test |
| ISO 9120:1997 | Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method |
| BS 2000-226(2002) : 2002 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - CALCULATION OF VISCOSITY INDEX FROM KINEMATIC VISCOSITY |
| DIN 51389-2:1982-04 | DETERMINATION OF LUBRICANTS; MECHANICAL TESTING OF HYDRAULIC FLUIDS IN THE VANE-CELL-PUMP; METHOD A FOR ANHYDROUS HYDRAULIC FLUIDS |
| ISO 6072:2011 | Rubber Compatibility between hydraulic fluids and standard elastomeric materials |
| DIN 51561:1978-12 | TESTING OF MINERAL OILS, LIQUID FUELS AND RELATED LIQUIDS; MEASUREMENT OF VISCOSITY USING THE VOGEL-OSSAG VISCOMETER; TEMPERATURE RANGE: APPROXIMATELY 10 TO 150-DEG C |
| ISO 7619:1997 | Rubber Determination of indentation hardness by means of pocket hardness meters |
| ISO 3733:1999 | Petroleum products and bituminous materials — Determination of water — Distillation method |
| ASTM D 5182 : 1997 : EDT 1 | Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method) |
| ASTM D 4289 : 2014-02 | TEST METHOD FOR ELASTOMER COMPATIBILITY OF LUBRICATING GREASES AND FLUIDS |
| IP 278 : 1972(R1988) | DETERMINATION OF SEAL COMPATIBILITY INDEX OF PETROLEUM OILS |
| DIN 51381:1988-12 | TESTING OF LUBRICATING OILS, GOVERNOR OILS & HYDRAULIC FLUIDS; DETERMINATION OF AIR RELEASE PROPERTIES |
| DIN 51354-2:1990-04 | TESTING OF LUBRICANTS; FZG GEAR TEST RIG; METHOD A/8.3/90 FOR LUBRICATING OILS |
| DIN 53505:2000-08 | TESTING OF RUBBER - SHORE A AND SHORE D HARDNESS TEST |
| IP 15 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF POUR POINT |
| ISO 2909:2002 | Petroleum products Calculation of viscosity index from kinematic viscosity |
| ASTM D 3427 : 2015 : REDLINE | Standard Test Method for Air Release Properties of Hydrocarbon Based Oils |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
| IP 135 : 2015 | DETERMINATION OF RUST-PREVENTING CHARACTERISTICS OF STEAM-TURBINE OIL IN THE PRESENCE OF WATER |
| ASTM D 943 : 2017-08 | TEST METHOD FOR OXIDATION CHARACTERISTICS OF INHIBITED MINERAL OILS |
| ISO 6743-4:2015 | Lubricants, industrial oils and related products (class L) Classification Part 4: Family H (Hydraulic systems) |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.