|
MIL-PRF-17331 Revision K:2013
|
LUBRICATING OIL, STEAM TURBINE AND GEAR, MODERATE SERVICE |
|
SAE MS 1010 : 2012
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE T TURBINE OILS - SPECIFICATION |
|
MIL-DTL-17111 Revision E:2012
|
FLUID, POWER TRANSMISSION |
|
DOD L 24574 : (1)
|
LUBRICATING FLUID FOR LOW AND HIGH PRESSURE OXIDIZING GAS MIXTURES |
|
DEFSTAN 91-71/2(2001) : 2001
|
LUBRICATING OIL, GEAR SYNTHETIC JOINT SERVICE DESIGNATION: OX-165 |
|
DEFSTAN 91-59/1(1991) : 1991
|
LUBRICATING OIL, EXTREME PRESSURE GRADE 75W - NATO CODE 0-186 - JOINT SERVICE DESIGNATION OEP-38 - LUBRICATING OIL, EXTREME PRESSURE GRADE 80W/90 - NATO CODE 0-226 |
|
MIL L 24467 : 0
|
LUBRICATING OIL, STEAM TURBINE, VAPOR-SPACE INHIBITED |
|
ASTM D 5969 : 2011 : EDT 1
|
Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments |
|
API MPM CH10.3 REDLINE : 2008
|
MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10: SEDIMENT AND WATER - SECTION 3: STANDARD TEST METHOD FOR WATER AND SEDIMENT IN CRUDE OIL BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE) |
|
EEMUA 194 : 2012
|
GUIDELINES FOR MATERIALS SELECTION AND CORROSION CONTROL FOR SUBSEA OIL AND GAS PRODUCTION EQUIPMENT |
|
ASTM D 3089 : 1997 : R2008
|
Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
|
ASTM D 5969 : 2011
|
Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments |
|
ASTM D 4007 : 2011 : EDT 1
|
Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
|
ASTM D 8029 : 2017-08
|
SPECIFICATION FOR BIODEGRADABLE, LOW AQUATIC TOXICITY HYDRAULIC FLUIDS |
|
DEFSTAN 91-035/4(2018) : 2018
|
HYDRAULIC FLUID, PETROLEUM: EMULSIFYING, ANTI-WEAR JOINT SERVICE DESIGNATION: OX-30 |
|
DEFSTAN 91-039/4(2018) : 2018
|
HYDRAULIC FLUID, PETROLEUM: ANTI-WEAR NATO CODE NO: H-576 JOINT SERVICE DESIGNATION: OM-33 |
|
ASTM D 7577 : 2012
|
Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends |
|
API MPM CH10.2 : 2016
|
Determination of Water in Crude Oil by Distillation |
|
MS 1007 : 2012
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE G SLIDEWAY LUBRICANTS - SPECIFICATION |
|
ISO 4113:2010
|
Road vehicles Calibration fluids for diesel injection equipment |
|
ASTM D 3603 : 2015-02
|
TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF STEAM TURBINE OIL IN THE PRESENCE OF WATER (HORIZONTAL DISK METHOD) |
|
MIL H 17672 : D
|
HYDRAULIC FLUID, PETROLEUM, INHIBITED |
|
MIL-H-46001 Revision D:1989
|
HYDRAULIC FLUID, PETROLEUM BASE, FOR MACHINE TOOLS |
|
MIL-DTL-32353 Revision A:2012
|
HYDRAULIC & LUBRICATING OIL, SYNTHETIC HYDROCARBON BASE |
|
SAE MS 1004 : 2017
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE H (HYDRAULIC FLUIDS) - SPECIFICATION |
|
BS ISO 13628-6:2000
|
Petroleum and natural gas industries. Design and operation of subsea production systems Design and operation of subsea controls |
|
BS ISO 4113:2010
|
Road vehicles. Calibration fluids for diesel injection equipment |
|
I.S. EN 61400-4:2013
|
WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES (IEC 61400-4:2012 (EQV)) |
|
ASTM D 7973 : 2014
|
Standard Guide for Monitoring Failure Mode Progression in Plain Bearings |
|
MIL-STD-3004 Revision D:2014
|
QUALITY ASSURANCE/SURVEILLANCE FOR FUELS, LUBRICANTS AND RELATED PRODUCTS |
|
MIL-PRF-32073 Revision A:2007
|
HYDRAULIC FLUID, BIOBASED |
|
04/302050 DC : DRAFT JAN 2004
|
ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS |
|
ASTM D 4007 : 2011 : R2016 : EDT 1
|
Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
|
DEFSTAN 91-71/1(1989) : 1989
|
LUBRICATING FLUID, GEAR, SYNTHETIC JOINT SERVICE DESIGNATION: OX-165 |
|
SAE J 313 : 2017
|
DIESEL FUELS |
|
ASTM D 5534 : 1994 : R2005
|
Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids |
|
SAE MS 1003-2 : 2004
|
Lubricants, Industrial Oils, and Related Products Type D Compressor Oils - Specification - Addendum(Cancelled Jan 2013) |
|
SAE MS 1005 : 2017
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE HF FIRE-RESISTANT HYDRAULIC FLUIDS - SPECIFICATION |
|
ASTM D 6813 : 2002 : REV A : R2007
|
Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
|
ASTM D 6813 : 2002
|
Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
|
ASTM D 7577 : 2012 : R2016
|
Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends |
|
ASTM D 6813 : 2002 : REV A : R2013
|
Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps (Withdrawn 2015) |
|
ASTM D 6813 : 2002 : REV A
|
Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
|
ASTM D 7752 : 2018 : REDLINE
|
Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids |
|
MIL-PRF-25017 Revision H:2011
|
INHIBITOR, CORROSION/LUBRICITY IMPROVER, FUEL SOLUBLE (NATO S-1747) |
|
MIL F 17111 : B
|
FLUID, POWER TRANSMISSION |
|
PD ISO/TR 18792:2008
|
Lubrication of industrial gear drives |
|
SAE MS 1000 : 2013
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS - CLASSIFICATION |
|
MIL-PRF-17672 Revision E:2010
|
Hydraulic Fluid, Petroleum, Inhibited |
|
SAE MS 1006 : 2018
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE F LUBRICANT FOR SPINDLE BEARINGS, AND ASSOCIATED CLUTCHES - SPECIFICATION |
|
ASTM D 6158 : 2016-02
|
SPECIFICATION FOR MINERAL HYDRAULIC OILS |
|
API 17F REDLINE : 2006
|
SPECIFICATION FOR SUBSEA PRODUCTION CONTROL SYSTEMS |
|
SAE MS 1003 : 2018
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE D COMPRESSOR OILS - SPECIFICATION |
|
ASTM D 5969 : 2011 : R2016
|
Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments |
|
API STD 17F : 2017
|
SUBSEA PRODUCTION CONTROL SYSTEMS |
|
ASTM D 4007 : 2011
|
Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
|
ASTM G 205 : 2016 : REDLINE
|
Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils |
|
ASTM D 5534 : 1994 : R2011 : EDT 1
|
Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids |
|
UNE-EN 61400-4:2013
|
Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
|
ISO 13628-6:2006
|
Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems |
|
BS EN ISO 13628-6:2006
|
Petroleum and natural gas industries. Design and operation of subsea production systems Subsea production control systems |
|
EN ISO 13628-6:2006
|
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO 13628-6:2006) |
|
NACE TM 01 72 : 2015
|
DETERMINING CORROSIVE PROPERTIES OF INSOLUBLE PETROLEUM PRODUCT PIPELINE CARGOES |
|
12/30250727 DC
|
BS EN ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS |
|
BS EN 61400-4:2013
|
Wind turbines Design requirements for wind turbine gea |
|
SAE J 1696 : 2017
|
STANDARD FUEL FILTER TEST FLUID |
|
11/30210938 DC : 0
|
BS EN 61400-4 - WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES |
|
SAE MS 1002 : 2017
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE C (GEARS) SPECIFICATION |
|
08/30178041 DC : DRAFT FEB 2008
|
BS ISO 4113 - ROAD VEHICLES - CALIBRATION FLUIDS FOR DIESEL INJECTION EQUIPMENT |
|
DOD L 24651 : 0
|
LUBRICATING OIL, FOOD GRADE, FOOD PROCESSING EQUIPMENT (METRIC) |
|
SAE MS 1009 : 2012
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE P PNEUMATIC TOOL OILS - SPECIFICATION |
|
SAE MS 1001 : 2017
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE A LUBRICANT FOR GENERAL PURPOSE AND TOTAL LOSS SYSTEMS - SPECIFICATION |
|
ASTM D 4304 : 2017 : REDLINE
|
Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines |
|
ASTM D 4007 : 2011 : R2016
|
Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
|
ASTM D 6224 : 2016 : REDLINE
|
Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment |
|
ASTM D 5534 : 1994 : R1999
|
Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids |
|
EN 61400-4:2013
|
Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
|
SAE J 311 : 2000
|
FLUID FOR PASSENGER CAR TYPE AUTOMATIC TRANSMISSIONS |