• Shopping Cart
    There are no items in your cart

TAPPI T 1200 : 2014

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

INTERLABORATORY EVALUATION OF TEST METHODS TO DETERMINE TAPPI REPEATABILITY AND REPRODUCIBILITY

Available format(s)

Hardcopy , PDF

Superseded date

20-01-2020

Language(s)

English

Published date

01-01-2014

€43.97
Excluding VAT

1. Scope
2. Summary of practice
3. Significance
4. Definitions
5. Planning the intra- or interlaboratory study
6. Conducting an intra- or interlaboratory study
7. Calculating repeatability from an intralaboratory
    study (for Provisional Methods)
8. Calculating repeatability and reproducibility from
    an interlaboratory study (for Official Methods)
9. Consistency evaluation
10. Statement of the precision of the test method
11. Keywords
12. Additional information
Appendix A.1: Example of intralaboratory trial and
              repeatability calculations
Appendix A.2: Example of interlaboratory trial and
              repeatability and reproducibility
              calculations
Appendix A.3: Applications of repeatability and
              reproducibility

Defines techniques for conducting and analyzing the results of intralaboratory and interlaboratory studies.

DevelopmentNote
Supersedes TAPPI 1206 (01/2001)
DocumentType
Standard Practice
Pages
16
PublisherName
Technical Association of the Pulp & Paper Industry
Status
Superseded
SupersededBy
Supersedes

BS EN ISO 12625-15:2015 Tissue paper and tissue products Determination of optical properties. Measurement of brightness and colour with C/2° (indoor daylight) illuminant
DIN ISO 16260:2016-10 (Draft) PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH (ISO 16260:2016)
BS ISO 20494:2017 Paper. Requirements for stability for general graphic applications
TAPPI UM 258 : 2010 LABORATORY PROCESSING OF PULP (KOLLERGANG METHOD)
TAPPI T 531 : 2001 STARCH CONSUMPTION IN CORRUGATED BOARD (ENZYMATIC/GRAVIMETRIC METHOD)
TAPPI T 271 : 2012(R 2018) FIBER LENGTH OF PULP AND PAPER BY AUTOMATED OPTICAL ANALYZER USING POLARIZED LIGHT
BS ISO 16532-3:2010 Paper and board. Determination of grease resistance Turpentine test for voids in glassine and greaseproof papers
ISO 5629:2017 Paper and board — Determination of bending stiffness — Resonance method
BS ISO 3781:2011 Paper and board. Determination of tensile strength after immersion in water
TAPPI T 569 : 2014 INTERNAL BOND STRENGTH (SCOTT TYPE)
TAPPI T 240 : 2012 CONSISTENCY (CONCENTRATION) OF PULP SUSPENSIONS
TAPPI T 406 : 2013 REDUCIBLE SULFUR IN PAPER AND PAPERBOARD
BS ISO 16260:2016 Paper and board. Determination of internal bond strength
16/30325457 DC : 0 BS ISO 8791-3 - PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 3: SHEFFIELD METHOD
DIN ISO 3039:2011-06 Corrugated fibreboard - Determination of grammage of the component papers after separation (ISO 3039:2010)
12/30242237 DC : 0 BS ISO 8791-2 - PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 2: BENDTSEN METHOD
BS ISO 16945:2014 Corrugating medium. Determination of the edge crush resistance after laboratory fluting
TAPPI T 578 : 2011 ACCELERATED LIGHT AGING OF PRINTING AND WRITING PAPER BY XENON-ARC EXPOSURE APPARATUS
TAPPI T 200 : 2010 LABORATORY BEATING OF PULP (VALLEY BEATER METHOD)
UNI ISO 5636-5 : 2014 PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 5: GURLEY METHOD
TAPPI T 252 : 2002 : R2012 PH AND ELECTRICAL CONDUCTIVITY OF HOT WATER EXTRACTS OF PULP, PAPER, AND PAPERBOARD
TAPPI T 558 : 2015 SURFACE WETTABILITY AND ABSORBENCY OF SHEETED MATERIALS USING AN AUTOMATED CONTACT ANGLE TESTER
ISO 5636-3:2013 Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method
I.S. EN ISO 1974:2012 PAPER - DETERMINATION OF TEARING RESISTANCE - ELMENDORF METHOD (ISO 1974:2012)
I.S. EN ISO 3035:2011 CORRUGATED FIBREBOARD - DETERMINATION OF FLAT CRUSH RESISTANCE (ISO 3035:2011)
TAPPI T 244 : 2011 ACID-INSOLUBLE ASH IN WOOD, PULP, PAPER, AND PAPERBOARD
ISO 5636-5:2013 Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method
TAPPI T 702 : 2014 RHEOLOGICAL MEASUREMENTS FOR CHARACTERIZATION OF POLYOLEFINS: LOW-DENSITY POLYETHYLENE (LDPE) FOR EXTRUSION COATING
UNE-EN ISO 12625-16:2015 Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015)
TAPPI T 476 : 2011 ABRASION LOSS OF PAPER AND PAPERBOARD (TABER-TYPE METHOD)
TAPPI T 613 : 2010 ANALYSIS OF CAUSTIC SODA
ISO 3039:2010 Corrugated fibreboard Determination of grammage of the component papers after separation
ISO 3037:2013 Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method)
ISO 12625-7:2014 Tissue paper and tissue products Part 7: Determination of optical properties Measurement of brightness and colour with D65/10 (outdoor daylight)
EN ISO 12625-7:2014 Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2014)
ISO 2759:2014 Board — Determination of bursting strength
UNE-EN ISO 12625-7:2015 Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2014)
BS EN ISO 12625-4:2016 Tissue paper and tissue products Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
BS EN ISO 2759:2014 Board. Determination of bursting strength
EN ISO 12625-5:2016 Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016)
EN ISO 12625-6:2016 Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2016)
DIN EN ISO 534:2012-02 Paper and board - Determination of thickness, density and specific volume (ISO 534:2011)
EN ISO 12625-4:2016 Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016)
TAPPI T 494 : 2013 TENSILE PROPERTIES OF PAPER AND PAPERBOARD (USING CONSTANT RATE OF ELONGATION APPARATUS)
TAPPI T 428 : 2013 HOT WATER EXTRACTABLE ACIDITY OR ALKALINITY OF PAPER
TAPPI UM 23 : 2010 BULK DENSITY OF WOOD CHIPS
TAPPI T 1014 : 2006 : R2010 MOISTURE SENSITIVITY OF FIBER GLASS MATS
BS ISO 8791-3:2017 Paper and board. Determination of roughness/smoothness (air leak methods) Sheffield method
TAPPI T 223 : 2010 PENTOSANS IN WOOD AND PULP
15/30274545 DC : 0 BS ISO 18522 - PAPER AND BOARD - AUTOMATED OFF-LINE TESTING OF PHYSICAL PROPERTIES FOR CD (CROSS DIRECTION) PROFILES
12/30196194 DC : 0 BS ISO 5636-5 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE AND AIR RESISTANCE (MEDIUM RANGE) - PART 5: GURLEY METHOD
ISO 16945:2014 Corrugating medium — Determination of the edge crush resistance after laboratory fluting
15/30323953 DC : 0 BS EN ISO 12625-5 - TISSUE PAPER AND TISSUE PRODUCTS - PART 5: DETERMINATION OF WET TENSILE STRENGTH
15/30323949 DC : 0 BS EN ISO 12625-4 - TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT MAXIMUM FORCE AND TENSILE ENERGY ABSORPTION
DIN EN ISO 3035:2012-02 Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011)
BS EN ISO 1974:2012 Paper. Determination of tearing resistance. Elmendorf method
BS EN ISO 12625-16:2015 Tissue paper and tissue products Determination of optical properties. Opacity (paper backing). Diffuse reflectance method
DIN ISO 16260 E : 2017 PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH (ISO 16260:2016)
I.S. EN ISO 535:2014 PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD (ISO 535:2014)
UNE-ISO 12192:2017 Paper and board. Determination of compressive strength. Ring crush method
DIN EN ISO 12625-15:2015-05 TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015)
BS ISO 12192:2011 Paper and board. Determination of compressive strength. Ring crush method
BS ISO 5636-4:2013 Paper and board. Determination of air permeance (medium range) Sheffield method
DIN EN ISO 535:2014-06 Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:2014)
TAPPI T 575 : 2013 ROUGHNESS OF PAPER AND PAPERBOARD, STYLUS (EMVECO-TYPE) METHOD
TAPPI T 408 : 2007 ROSIN IN PAPER AND PAPERBOARD
BS ISO 5636-3:2013 Paper and board. Determination of air permeance (medium range) Bendtsen method
TAPPI T 523 : 2006 DYNAMIC MEASUREMENT OF WATER VAPOR TRANSFER THROUGH SHEET MATERIALS
09/30181245 DC : 0 BS ISO 3039 - CORRUGATED FIBREBOARD - DETERMINATION OF GRAMMAGE OF THE COMPONENT PAPERS AFTER SEPARATION
TAPPI T 255 : 2007 WATER-SOLUBLE SULFATES IN PULP AND PAPER
TAPPI T 200 : 2010 : R2015 LABORATORY BEATING OF PULP (VALLEY BEATER METHOD)
ISO 16532-3:2010 Paper and board — Determination of grease resistance — Part 3: Turpentine test for voids in glassine and greaseproof papers
UNE-ISO 5636-3:2015 Paper and board. Determination of air permeance (medium range). Part 3: Bendtsen method
TAPPI T 572 : 2013 ACCELERATED POLLUTANT AGING OF PRINTING AND WRITING PAPER BY POLLUTION CHAMBER EXPOSURE APPARATUS
ISO 2493-1:2010 Paper and board Determination of bending resistance Part 1: Constant rate of deflection
ISO/TR 24498:2006 Paper, board and pulps Estimation of uncertainty for test methods
TAPPI T 504 : 2007 GLUE IN PAPER (QUALITATIVE AND QUANTITATIVE DETERMINATION)
TAPPI T 282 : 2013 : R 2019 HEXENEURONIC ACID CONTENT OF CHEMICAL PULP
TAPPI T 532 : 2001 STARCH CONSUMPTION IN CORRUGATED BOARD (ENZYMATIC/COLORIMETRIC METHOD)
ISO 12625-3:2014 Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk
UNE-EN ISO 3037:2013 Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013)
UNE-EN ISO 536:2013 Paper and board - Determination of grammage (ISO 536:2012)
BS EN ISO 12625-5:2016 Tissue paper and tissue products Determination of wet tensile strength
BS EN ISO 2758:2014 Paper. Determination of bursting strength
I.S. EN ISO 12625-3:2014 TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY AND BULK (ISO 12625-3:2014)
I.S. EN ISO 12625-7:2014 TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH D65/10 DEGREE (OUTDOOR DAYLIGHT) (ISO 12625-7:2014)
I.S. EN ISO 12625-5:2016 TISSUE PAPER AND TISSUE PRODUCTS - PART 5: DETERMINATION OF WET TENSILE STRENGTH (ISO 12625-5:2016)
TAPPI T 431 : 2010 INK ABSORBENCY OF BLOTTING PAPER
I.S. EN ISO 3037:2013 CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) (ISO 3037:2013)
I.S. EN ISO 12625-6:2016 TISSUE PAPER AND TISSUE PRODUCTS - PART 6: DETERMINATION OF GRAMMGE
I.S. EN ISO 2758:2014 PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2014)
I.S. EN ISO 2759:2014 BOARD - DETERMINATION OF BURSTING STRENGTH (ISO 2759:2014)
I.S. EN ISO 534:2011 PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME (ISO 534:2011)
I.S. EN ISO 12625-4:2016 TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT BREAK AND TENSILE ENERGY ABSORPTION
BS ISO 5636-5:2013 Paper and board. Determination of air permeance (medium range) Gurley method
BS ISO 2493-1:2010 Paper and board. Determination of bending resistance Constant rate of deflection
DIN EN ISO 535 E : 2014 PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD (ISO 535:2014)
DIN EN ISO 1974:2012-09 Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012)
13/30272957 DC : 0 BS EN ISO 12625-3 - TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY
BS ISO 5636-6:2015 Paper and board. Determination of air permeance (medium range) Oken method
TAPPI T 230 : 2013 VISCOSITY OF PULP (CAPILLARY VISCOMETER METHOD)
UNE-ISO 5636-5:2015 Paper and board. Determination of air permeance (medium range). Part 5: Gurley method
TAPPI T 227 : 2009 FREENESS OF PULP (CANADIAN STANDARD METHOD)
11/30216364 DC : 0 BS EN ISO 1974 - PAPER - DETERMINATION OF TEARING RESISTANCE (ELMENDORF METHOD)
ISO 3034:2011 Corrugated fibreboard — Determination of single sheet thickness
ISO 12192:2011 Paper and board — Determination of compressive strength — Ring crush method
BS ISO 2493-2:2011 Paper and board. Determination of bending resistance Taber-type tester
12/30213199 DC : 0 BS ISO 5636-3 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 3: BENDTSEN METHOD
TAPPI T 495 : 2013 BENDING NUMBER OF PAPERBOARD
09/30190545 DC : 0 BS ISO 2493-1 - PAPER AND BOARD - DETERMINATION OF BENDING RESISTANCE - PART 1: CONSTANT RATE OF DEFLECTION
BS ISO 22891:2013 Paper. Determination of transmittance by diffuse reflectance measurement
TAPPI T 458 : 2014 SURFACE WETTABILITY OF PAPER (ANGLE OF CONTACT METHOD)
UNE-EN ISO 3035:2012 Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011)
ISO 22891:2013 Paper — Determination of transmittance by diffuse reflectance measurement
TAPPI T 556 : 2011 BENDING RESISTANCE OF PAPER AND PAPERBOARD BY SINGLE-POINT BENDING METHOD
10/30196197 DC : 0 BS ISO 2493-2 - PAPER AND BOARD - DETERMINATION OF RESISTANCE TO BENDING - PART 2:TABER-TYPE TESTER
TAPPI T 222 : 2002 ACID-INSOLUBLE LIGNIN IN WOOD AND PULP
ISO 20494:2017 Paper — Requirements for stability for general graphic applications
TAPPI T 1009 : 2006 : R2010 TENSILE STRENGTH AND ELONGATION AT BREAK FOR FIBER GLASS MATS
BS ISO 3039:2010 Corrugated fibreboard. Determination of grammage of the component papers after separation
TAPPI T 646 : 2006 BRIGHTNESS OF CLAY AND OTHER MINERAL PIGMENTS (45/0)
TAPPI T 1012 : 2006 : R2010 MOISTURE CONTENT OF FIBER GLASS MATS
UNE-ISO 3039:2013 Corrugated fibreboard. Determination of the grammage of the component papers after separation
TAPPI T 212 : 2012 ONE PERCENT SODIUM HYDROXIDE SOLUBILITY OF WOOD AND PULP
PREN ISO 3037 : DRAFT 2013 CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) (ISO/FDIS 3037:2013)
ISO 8791-2:2013 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method
UNI EN ISO 1974 : 2012 PAPER - DETERMINATION OF TEARING RESISTANCE - ELMENDORF METHOD
ISO 16260:2016 Paper and board — Determination of internal bond strength
ISO 5636-4:2013 Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method
TAPPI T 841 : 2003 EDGEWISE COMPRESSIVE STRENGTH OF CORRUGATED FIBERBOARD USING THE MORRIS METHOD (SHORT COLUMN TEST)
UNI EN ISO 535 : 2014 PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD
TAPPI T 571 : 2003 DIFFUSE BRIGHTNESS OF PAPER AND PAPERBOARD (D/0)
ASTM D 1223 : 1993 : R2006 Standard Test Method for Specular Gloss of Paper and Paperboard at 75° (Withdrawn 2010)
ASTM D 6125 : 1997 Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester)
DIN EN ISO 536:2012-11 PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012)
TAPPI T 507 : 1999 GREASE RESISTANCE OF FLEXIBLE PACKAGING MATERIALS
UNI EN ISO 12625-7 : 2014 TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH D65/10 DEGREES (OUTDOOR DAYLIGHT)
UNI EN ISO 2758 : 2014 PAPER - DETERMINATION OF BURSTING STRENGTH
UNI EN ISO 534 : 2012 PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME
UNI EN ISO 3037 : 2013 CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD)
UNI EN ISO 2759 : 2014 BOARD - DETERMINATION OF BURSTING STRENGTH
UNI EN ISO 12625-3 : 2014 TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY AND BULK
UNI ISO 5636-4 : 2014 PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 4: SHEFFIELD METHOD
TAPPI T 650 : 2015 SOLIDS CONTENT OF BLACK LIQUOR
TAPPI T 562 : 2010 CIE WHITENESS AND TINT OF PAPER AND PAPERBOARD (45/0 GEOMETRY, C/2 ILLUMINANT/OBSERVER)
DIN ISO 3781:2012-07 Paper and board - Determination of tensile strength after immersion in water (ISO 3781:2011)
TAPPI T 836 : 2013 BENDING STIFFNESS, FOUR POINT METHOD
13/30277424 DC : 0 BS EN ISO 3037 - CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD)
UNI ISO 5636-3 : 2014 PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 3: BENDTSEN METHOD
DIN EN ISO 12625-16:2015-05 Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015)
BS ISO 8791-2:2013 Paper and board. Determination of roughness/smoothness (air leak methods) Bendtsen method
TAPPI T 1012 : 2006 MOISTURE CONTENT OF FIBER GLASS MATS
13/30283973 DC : 0 BS EN ISO 12625-15 - TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 DEGREES (INDOOR DAYLIGHT) ILLUMINANT
TAPPI T 560 : 2005 : R2010 CIE WHITENESS AND TINT OF PAPER AND PAPERBOARD (D/0 GEOMETRY, C/2 ILLUMINANT/OBSERVER)
BS EN ISO 535:2014 Paper and board. Determination of water absorptiveness. Cobb method
TAPPI T 819 : 2007 WATER ABSORPTION OF CORRUGATING MEDIUM: BOAT METHOD
TAPPI T 1014 : 2006 MOISTURE SENSITIVITY OF FIBER GLASS MATS
12/30196191 DC : 0 BS ISO 5636-4 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 4: SHEFFIELD METHOD
ISO 8791-3:2017 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method
TAPPI T 1205 : 2014 DEALING WITH SUSPECT (OUTLYING) TEST DETERMINATIONS
TAPPI T 546 : 2015 MACHINE-DIRECTION GRAMMAGE VARIATION MEASUREMENT (GRAVIMETRIC METHOD)
UNE-ISO 2493-2:2014 Paper and board. Determination of resistance to bending. Part 2: Taber-type tester
TAPPI T 560 : 2005 CIE WHITENESS AND TINT OF PAPER AND PAPERBOARD (D/0 GEOMETRY, C/2 ILLUMINANT/OBSERVER)
TAPPI T 1009 : 2006 TENSILE STRENGTH AND ELONGATION AT BREAK FOR FIBER GLASS MATS
UNE-ISO 16945:2015 Corrugating medium. Determination of the edge crush resistance after laboratory fluting
TAPPI T 252 : 2002 PH AND ELECTRICAL CONDUCTIVITY OF HOT WATER EXTRACTS OF PULP, PAPER, AND PAPERBOARD
BS ISO 5629:2017 Paper and board. Determination of bending stiffness. Resonance method
TAPPI T 264 : 2007 PREPARATION OF WOOD FOR CHEMICAL ANALYSIS
TAPPI T 545 : 2011 CROSS-MACHINE GRAMMAGE PROFILE MEASUREMENT (GRAVIMETRIC METHOD)
ISO 3781:2011 Paper and board — Determination of tensile strength after immersion in water
TAPPI T 1206 : SP 91 PRECISION STATEMENT FOR TEST METHODS
ASTM D 1749 : 1993 : R2007 Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products (Withdrawn 2010)
TAPPI T 454 : 2015 TURPENTINE TEST FOR VOIDS IN GLASSINE AND GREASEPROOF PAPERS
ISO 2493-2:2011 Paper and board Determination of bending resistance Part 2: Taber-type tester
ISO 5636-6:2015 Paper and board Determination of air permeance (medium range) Part 6: Oken method
EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012)
DIN EN ISO 3037:2013-12 Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013)
DIN EN ISO 2759:2014-10 Board - Determination of bursting strength (ISO 2759:2014)
DIN EN ISO 12625-3:2014-09 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk (ISO 12625-3:2014)
DIN EN ISO 2758:2014-12 PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2014)
UNE-EN ISO 12625-4:2017 Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016)
BS EN ISO 3037:2013 Corrugated fibreboard. Determination of edgewise crush resistance (unwaxed edge method)
BS EN ISO 12625-3:2014 Tissue paper and tissue products Determination of thickness, bulking thickness and apparent bulk density and bulk
BS EN ISO 536:2012 Paper and board. Determination of grammage
ISO 535:2014 Paper and board — Determination of water absorptiveness — Cobb method
ISO 1974:2012 Paper — Determination of tearing resistance — Elmendorf method
UNI EN ISO 536 : 2012 PAPER AND BOARD - DETERMINATION OF GRAMMAGE
UNE-ISO 2493-1:2014 Paper and board - Determination of bending resistance - Part 1: Constant rate of deflection
BS EN ISO 534:2011 Paper and board. Determination of thickness, density and specific volume
BS EN ISO 12625-6:2016 Tissue paper and tissue products Determination of grammage
UNE-EN ISO 12625-5:2017 Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016)
ISO 12625-16:2015 Tissue paper and tissue products — Part 16: Determination of optical properties — Opacity (paper backing) — Diffuse reflectance method
UNE-EN ISO 534:2012 Paper and board - Determination of thickness, density and specific volume (ISO 534:2011)
UNE-EN ISO 12625-3:2015 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014)
BS EN ISO 12625-7:2014 Tissue paper and tissue products Determination of optical properties. Measurement of brightness and colour with D65/10° (outdoor daylight)
UNE-EN ISO 2758:2014 Paper - Determination of bursting strength (ISO 2758:2014)
ISO 2758:2014 Paper Determination of bursting strength
ISO 536:2012 Paper and board Determination of grammage
UNE-EN ISO 12625-6:2017 Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2016)
UNE-EN ISO 2759:2014 Board - Determination of bursting strength (ISO 2759:2014)
UNE-ISO 3781:2015 Paper and board - Determination of tensile strength after inmersion in water
ISO 12625-4:2016 Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
EN ISO 535:2014 Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:2014)
EN ISO 1974:2012 Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012)
EN ISO 12625-16:2015 Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015)
EN ISO 534:2011 Paper and board - Determination of thickness, density and specific volume (ISO 534:2011)
EN ISO 3035:2011 Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011)
EN ISO 2759:2014 Board - Determination of bursting strength (ISO 2759:2014)
EN ISO 12625-15:2015 Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2015)
EN ISO 3037:2013 Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013)
EN ISO 2758:2014 Paper - Determination of bursting strength (ISO 2758:2014)
TAPPI T 815 : 2012(R2018) COEFFICIENT OF STATIC FRICTION (SLIDE ANGLE) OF PACKAGING AND PACKAGING MATERIALS (INCLUDING SHIPPING SACK PAPERS, CORRUGATED AND SOLID FIBERBOARD) (INCLINED PLANE METHOD)
13/30247449 DC : 0 BS ISO 16945 - CORRUGATING MEDIUM - DETERMINATION OF THE EDGE CRUSH RESISTANCE AFTER LABORATORY FLUTING
TAPPI T 622 : 2010 ANALYSIS OF SODIUM HYDROSULFITE
BS ISO 18522:2016 Paper and board. Automated off-line testing of physical properties for CD (cross direction) profiles
BS ISO 3034:2011 Corrugated fibreboard. Determination of single sheet thickness
TAPPI T 559 : 2012 GREASE RESISTANCE TEST FOR PAPER AND PAPERBOARD
17/30323191 DC : DRAFT JAN 2017 BS ISO 20494 - PAPER - REQUIREMENTS FOR STABILITY FOR GENERAL, GRAPHIC APPLICATIONS
TAPPI T 604 : 2009 SULFUR DIOXIDE IN SULFITE COOKING LIQUOR
TAPPI T 567 : 2009 DETERMINATION OF EFFECTIVE RESIDUAL INK CONCENTRATION (ERIC) BY INFRARED REFLECTANCE MEASUREMENT
TAPPI T 530 : 2012 SIZE TEST FOR PAPER BY INK RESISTANCE
ASTM D 1749 : 1993 : R2002 Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products
ASTM D 6125 : 1997 : R2002 Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester)
ASTM D 1749 : 1993 : R1997 Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products
TAPPI T 803 : 2010 PUNCTURE TEST OF CONTAINER BOARD
TAPPI T 627 : 2009 DETERMINATION OF TITANIUM DIOXIDE
14/30219261 DC : 0 BS ISO 5636-6 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE AND AIR RESISTANCE (MEDIUM RANGE) - PART 6: OKEN METHOD
TAPPI T 831 : 2014 WATER ABSORPTION OF CORRUGATING MEDIUM: WATER DROP PENETRATION TEST
13/30283977 DC : 0 BS EN ISO 12625-16 - TISSUE PAPER AND TISSUE PRODUCTS - PART 16: DETERMINATION OF OPTICAL PROPERTIES - OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE FACTOR
DIN ISO 3034:2016-08 CORRUGATED FIBREBOARD - DETERMINATION OF SINGLE SHEET THICKNESS (ISO 3034:2011)
ASTM D 6125 : 1997 : R2007 Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester) (Withdrawn 2010)
ASTM D 1223 : 1993 : R1998 Standard Test Method for Specular Gloss of Paper and Paperboard at 75&#176
PREN ISO 12625-3 : DRAFT 2013 TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY (ISO/DIS 12625-3:2013)
UNI EN ISO 3035 : 2012 CORRUGATED FIBREBOARD - DETERMINATION OF FLAT CRUSH RESISTANCE
TAPPI T 266 : 2011 DETERMINATION OF SODIUM, CALCIUM, COPPER, IRON, AND MANGANESE IN PULP AND PAPER BY ATOMIC ABSORPTION SPECTROSCOPY
13/30230645 DC : 0 BS ISO 16260 - PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH
UNI ISO 8791-2 : 2014 PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 2: BENDTSEN METHOD
BS EN ISO 3035:2011 Corrugated fibreboard. Determination of flat crush resistance
TAPPI T 453 : 2013 EFFECT OF DRY HEAT ON PROPERTIES OF PAPER AND BOARD
TAPPI T 222 : 2002 : R2011 ACID-INSOLUBLE LIGNIN IN WOOD AND PULP
TAPPI T 252 : 2002 : R2007 PH AND ELECTRICAL CONDUCTIVITY OF HOT WATER EXTRACTS OF PULP, PAPER, AND PAPERBOARD
TAPPI T 452 : 2008 BRIGHTNESS OF PULP, PAPER AND PAPERBOARD (DIRECTIONAL REFLECTANCE AT 457 NM)
TAPPI T 464 : 2012 WATER VAPOR TRANSMISSION RATE OF PAPER AND PAPERBOARD AT HIGH TEMPERATURE AND HUMIDITY
TAPPI T 646 : 2006 : R2011 BRIGHTNESS OF CLAY AND OTHER MINERAL PIGMENTS (45/0)
TAPPI T 203 : 1999 ALPHA-, BETA- AND GAMMA-CELLULOSE IN PULP
TAPPI T 544 : 2008 AGING OF PAPER AND BOARD WITH MOIST HEAT
TAPPI T 438 : 2006 ZINC AND CADMIUM IN PAPER
TAPPI T 231 : 2007 ZERO-SPAN BREAKING STRENGTH OF PULP (DRY ZERO-SPAN TENSILE)
TAPPI T 455 : 2014 IDENTIFICATION OF WIRE SIDE OF PAPER
UNE-EN ISO 1974:2013 Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012)
I.S. EN ISO 12625-16:2015 TISSUE PAPER AND TISSUE PRODUCTS - PART 16: DETERMINATION OF OPTICAL PROPERTIES - OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE METHOD (ISO 12625-16:2015)
I.S. EN ISO 12625-15:2015 TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 DEGREES (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015)
TAPPI T 701 : PM 2001 GRAVIMETRIC METHOD FOR MEASURING DEWATERING OF COATING COLORS (ABO-AKADEMI-TYPE METHOD)
TAPPI T 245 : 2007 SILICATES AND SILICA IN PULP (WET ASH METHOD)
TAPPI T 282 : 2013 HEXENEURONIC ACID CONTENT OF CHEMICAL PULP
TAPPI T 835 : 2014 WATER ABSORPTION OF CORRUGATING MEDIUM: WATER DROP ABSORPTION TEST
TAPPI T 579 : 2012 DIFFUSE BRIGHTNESS OF PAPER, PAPERBOARD AND PULP (D/0) (ULTRAVIOLET LEVEL D65)
UNE-ISO 16532-3:2017 Paper and board. Determination of grease resistance. Part 3: Turpentine test for voids in glassine and greaseproof papers
UNE-EN ISO 12625-15:2015 Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2015)
TAPPI T 577 : 2013 SCORE BEND TEST
I.S. EN ISO 536:2012 PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012)
ISO 12625-6:2016 Tissue paper and tissue products Part 6: Determination of grammage
ISO 12625-5:2016 Tissue paper and tissue products — Part 5: Determination of wet tensile strength
ISO 534:2011 Paper and board — Determination of thickness, density and specific volume
ISO 12625-15:2015 Tissue paper and tissue products — Part 15: Determination of optical properties — Measurement of brightness and colour with C/2° (indoor daylight) illuminant
ISO 3035:2011 Corrugated fibreboard — Determination of flat crush resistance
DIN EN ISO 2759:2003-11 BOARD - DETERMINATION OF BURSTING STRENGTH (ISO 2759:2014)
EN ISO 12625-3:2014 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014)

TAPPI T 804 : 2012 COMPRESSION TEST OF FIBERBOARD SHIPPING CONTAINERS
TAPPI T 650 : 2015 SOLIDS CONTENT OF BLACK LIQUOR
TAPPI T 807 : 2011 BURSTING STRENGTH OF LINERBOARD
TAPPI T 1206 : SP 91 PRECISION STATEMENT FOR TEST METHODS

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.