TT-E-751 Revision C:1967
Current
Current
The latest, up-to-date edition.
Important note : Users cannot be edited or removed once added to your Multi user PDF.Requirements for ethyl acetate technical grade.
| Committee |
FSC 6810
|
| DevelopmentNote |
C NOTICE 1 - Notice of Inactivation for New Design. (09/2014)
|
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| MIL-STD-1214 Revision A:1990 | ESTERS AND METAL ORGANICS, TECHNICAL GRADE |
| MIL-S-7124 Revision B:1966 | SEALING COMPOUND, POLYSULFIDE, ACCELERATOR REQUIRED FOR AIRCRAFT STRUCTURES |
| MIL-R-82483 Revision A:1976 | RESIN, POLYESTER, SOLUTIONS |
| MIL-S-29574 Base Document:1989 | SEALING COMPOUND, POLYTHIOETHER, FOR AIRCRAFT STRUCTURES, FUEL AND HIGH TEMPERATURE RESISTANT, FAST CURING AT AMBIENT AND LOW TEMPERATURE |
| MIL D 7850 : A | DOPE, CELLULOSE - ACETATE - BUTYRATE, FIRST COAT, FUNGICIDAL |
| MIL S 81733 : C | SEALING AND COATING COMPOUND CORROSION INHIBITIVE |
| MIL-S-85312 Base Document:1979 | SEALING COMPOUND, NONCURING, POLYSULFIDE, GROOVE INJECTION, FOR INTEGRAL FUEL TANKS |
| MIL-A-38267 Revision A:1971 | APPLICATION OF POLYURETHANE FUEL TANK COATINGS |
| MIL N 25027 : G | NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F |
| MIL-DTL-25027 Revision H:1997 | NUT, SELF-LOCKING, 250 DEG F, 450 DEG F, AND 850 DEG F |
| MIL-N-8984 Base Document:1972 | NUT, SELF-LOCKING, STEEL, 260 KS1 FTU 450 DEGREES F |
| MIL-N-8985 Base Document:1972 | NUT, SELF-LOCKING STEEL, 180 KS1 FTU 450 DEGREES F |
| MIL-F-8961 Revision A:1992 | Fastener Element, Self-Locking, Externally Threaded, 450 Degrees Fahrenheit and 1,200 Degrees Fahrenheit |
| MIL-S-4383 Revision C:1986 | SEALING COMPOUND, TOPCOAT, FUEL TANK, BUNA-N TYPE |
| SAE AMS3166C | Solvents, Cleaning, Cleaning Prior to Application of Sealing Compounds |
| MIL-C-83982 Base Document:1974 | COMPOUND, SEALING, FLUID RESISTANT |
| MIL-D-5549 Revision B:1971 | DOPE, CELLULOSE ACETATE BUTYRATE CLEAR FOR AIRCRAFT USE |
| MIL-C-27725 Revision B:1969 | COATING, CORROSION PREVENTIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS |
| MIL-P-21563 Revision B:1962 | POINT SYSTEM, FLUORESCENT, FOR AIRCRAFT APPLICATION (ASA) |
| NASA KSC TM 584 : 1994 | CORROSION CONTROL AND TREATMENT MANUAL |
| MIL-PRF-23586 Revision F:1996 | Sealing Compound (With Accelerator), Silicone Rubber, Electrical |
| TT-L-32 Revision A:1969 | LACQUER, CELLULOSE NITRATE, GLOSS, FOR AIRCRAFT USE |
| MIL-S-85334 Base Document:1980 | SEALING COMPOUND, NONCURING LOW CONSISTENCY, SILICONE, GROOVE INJECTION, FOR INTEGRAL FUEL TANKS |
| MIL-N-85615 Base Document:1986 | Nut, Sealing, Self-Locking, 250 Degrees F, 450 Degrees F General Specification For |
| MIL-P-7962 Revision D:1980 | PRIMER COATING, CELLULOSE NITRATE MODIFIED ALKYD TYPE, CORROSION INHIBITING, FAST DRYING [FOR SPRAY APPLICATION OVER PRETREATMENT COATING |
| MIL-S-38249 Base Document:1964 | SEALING COMPOUND, FIREWALL |
| MIL-S-38228 Base Document:1964 | SEALING COMPOUND, ENVIRONMENTAL, FOR AIRCRAFT SURFACES |
| MIL-C-38736 Revision B Base Document:1984 | CLEANING COMPOUND, SOLVENT MIXTURES (METRIC) |
| MIL-S-8784 Revision B:1971 | SEALING COMPOUND, LOW ADHESION, FOR REMOVABLE PANELS AND FUEL TANK INSPECTION PLATES |
| MIL D 5551 : B | DOPE, CELLULOSE ACETATE BUTYRATE, PIGMENTED, GLOSS |
| MIL S 23586 : E | SEALING COMPOUND, ELECTRICAL, SILICONE RUBBER, ACCELERATOR REQUIRED |
| MIL-L-10287 Revision B:1976 | LACQUER, CELLULOSE NITRATE FOR IDENTIFICATION OF SMALL ARMS AMMUNITION |
| NASM25027:2012 | NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F |
| MIL-T-6096 Revision A:1951 | THINNER, CELLULOSE ACETATE BUTYRATE DOPE |
| PPP-C-96 Revision E:1992 | CAN, METAL, 28 GAGE AND LIGHTER |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| FED-STD-123 Revision H:2007 | MARKING FOR SHIPMENT (CIVIL AGENCIES) |
| PPP-D-729 Revision E:1977 | DRUMS, SHIPPING AND STORAGE, STEEL, 55 GALLON (208 LITERS) |
| PPP-P-704 Revision E:1981 | Pails, Metal: (Shipping, Steel, 1 through 12 Gallons) |
| FED-STD-141 Revision D:2001 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING |
| MIL-STD-105 Revision E:1989 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.