![header thumbnail](/images/publishers\aenor_cover.gif)
UNE-EN 12583:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\aenor_cover.gif)
Gas Infrastructure - Compressor stations - Functional requirements
Hardcopy , PDF
22-03-2023
Spanish, Castilian, English
29-10-2014
Foreword
1 Scope
2 Normative references
3 Definitions
4 Safety
5 Quality assurance
6 Environmental constraints
7 Design, construction and testing
7.1 General requirements for design
7.2 Location and station lay-out
7.3 Gas pipework
7.4 Compressor unit
7.5 Station Control and Automation
7.6 Electrical installation and power supply
7.7 General requirements for construction
7.8 Testing and acceptance
8 Operation
8.1 Introduction and basic requirements
8.2 Operating organization
8.3 Instruction procedures
8.4 Management of operating procedures
8.5 Training of personnel
8.6 Safety precautions
9 Maintenance
9.1 Introduction and basic requirements
9.2 Maintenance organization
9.3 Maintenance procedures
9.4 Management of the maintenance procedures
9.5 Training of personnel
9.6 Maintenance tools and equipment
9.7 Safety
10 Decommissioning and disposal
10.1 Decommissioning
10.2 Disposal
Annex A (informative) Boundary of a gas compressor station
Annex B (informative) Parts of a gas compressor unit
Annex C (informative) Boundary Gas compressor unit/Driver
Annex D (informative) Boundary Gas compressor unit/Gas
compressor
Annex E (informative) Boundary Gas compressor unit/Unit
control system
Annex F (informative) Boundary Gas compressor unit/
Auxiliary equipment
Bibliography
Defines specific functional requirements for construction, design, maintenance, operation and disposal activities for safe and secure gas compressor stations. Applies to gas compressor stations with a Maximum Operating Pressure (MOP) over 16 bar and a total shaft power over 1 MW. Need not be applied to gas compressor stations operating prior to publication of this standard. For those already in service, applies by analogy only to the parts of the stations to be modified, extended or disposed. Can also apply at any time to areas of operation and maintenance. The purpose of this standard is to ensure public safety and safety of all personnel involved, to cover environmental issues and avoid damage to property. Defines common basic principles for gas supply systems.
Committee |
CTN 60
|
DocumentType |
Standard
|
Pages |
56
|
PublisherName |
Asociacion Espanola de Normalizacion
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
ONORM EN 12583 : JUL 2014 | Identical |
NS EN 12583 : 2014 | Identical |
BS EN 12583:2014 | Identical |
SN EN 12583 : 2014 | Identical |
UNI EN 12583 : 2014 | Identical |
NF EN 12583 : 2014 | Identical |
NBN EN 12583 : 2014 | Identical |
DIN EN 12583:2014-07 | Identical |
I.S. EN 12583:2014 | Identical |
EN 12583:2014 | Identical |
NEN EN 12583 : 2014 | Identical |
DIN EN 12583:2000-11 | Identical |
EN 12732:2013+A1:2014 | Gas infrastructure - Welding steel pipework - Functional requirements |
ISO 13707:2000 | Petroleum and natural gas industries Reciprocating compressors |
EN 12327:2012 | Gas infrastructure - Pressure testing, commissioning and decommissioning procedures - Functional requirements |
EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
IEC 61000-6-4:2006+AMD1:2010 CSV | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
ISO 3977-2:1997 | Gas turbines — Procurement — Part 2: Standard reference conditions and ratings |
EN 1775:2007 | Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
EN 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
EN ISO 1680:2013 | Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013) |
IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
ISO 3977-1:1997 | Gas turbines — Procurement — Part 1: General introduction and definitions |
ISO 13631:2002 | Petroleum and natural gas industries Packaged reciprocating gas compressors |
EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
ISO 10437:2003 | Petroleum, petrochemical and natural gas industries — Steam turbines — Special-purpose applications |
EN 1594:2013 | Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements |
EN 14505:2005 | Cathodic protection of complex structures |
IEC 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
ISO 50001:2011 | Energy management systems Requirements with guidance for use |
IEC 60079-20-1:2010 | Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data |
ISO 1680:2013 | Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machines |
EN 15001-2:2008 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance |
EN ISO 13631:2002 | Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002) |
ISO 11042-1:1996 | Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation |
ISO 21789:2009 | Gas turbine applications — Safety |
ISO 2314:2009 | Gas turbines — Acceptance tests |
ISO 11042-2:1996 | Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring |
EN 1012-3:2013 | Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
EN 61000-6-4:2007/A1:2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
EN 62061:2005/A2:2015 | SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015) |
IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
CEN/TR 13737-1:2012 | Implementation Guide for functional standards prepared by CEN/TC 234 Gas infrastructure - Part 1: General |
EN ISO 14001:2015 | Environmental management systems - Requirements with guidance for use (ISO 14001:2015) |
ISO 9001:2015 | Quality management systems — Requirements |
EN 60079-20-1:2010 | Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data |
IEC 61000-6-4:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
CEN/TR 16388 : 2012 | Gas-Specific Environmental Document - Guideline for incorporating within standards to minimize the environmental impact of gas infrastructure across the whole life cycle |
CEN/TR 13737-2:2014 | Gas infrastructure - Implementation Guide for Functional Standards prepared by CEN/TC 234 - Part 2: National Pages related to CEN/TC 234 standards |
EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
EN ISO 10437:2003 | Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications (ISO 10437:2003) |
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
EN 16348:2013 | Gas infrastructure - Safety Management System (SMS) for gas transmission infrastructure and Pipeline Integrity Management System (PIMS) for gas transmission pipelines - Functional requirements |
ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
IEC 61000-6-2 : 3.0:2016 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS |
EN ISO 50001:2011 | Energy management systems - Requirements with guidance for use (ISO 50001:2011) |
ISO 10494:1993 | Gas turbines and gas turbine sets Measurement of emitted airborne noise Engineering/survey method |
EN ISO 10439:2002 | Petroleum, chemical and gas service industries - Centrifugal compressors (ISO 10439:2002) |
ISO 10439:2002 | Petroleum, chemical and gas service industries Centrifugal compressors |
EN 12186:2014 | Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.