UNE-EN 16640:2017
Current
The latest, up-to-date edition.
Bio-based products - Bio-based carbon content - Determination of the bio-based carbon content using the radiocarbon method
Hardcopy , PDF
Spanish, Castilian, English
14-06-2017
This European Standard specifies a method for the determination of the bio-based carbon content in products, based on the 14C content measurement.This European Standard also specifies three test methods to be used for the determination of the 14C content from which the bio-based carbon content is calculated:-Method A: Liquid scintillation-counter method (LSC) (normative);-Method B: Beta-ionization (BI) (informative);-Method C: Accelerator mass spectrometry (AMS) (normative).The bio-based carbon content is expressed by a fraction of sample mass or as a fraction of the total carbon content. This calculation method is applicable to any product containing carbon, including bio composites.NOTEThis European standard does not provide the methodology for the calculation of the biomass content of a sample see prEN 16785-1 [5] and prEN 16785-2 [6].
| Committee |
CTN 53/SC 6
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
Asociación Española de Normalización
|
| Status |
Current
|
| Standards | Relationship |
| EN 16640:2017 | Identical |
| EN 16640:2017/AC:2017 | Identical |
| CEN/TS 16137:2011 | Plastics - Determination of bio-based carbon content |
| ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
| EN 15440 : 2011 COR 2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF BIOMASS CONTENT |
| ISO 10715:1997 | Natural gas — Sampling guidelines |
| ISO 5555:2001 | Animal and vegetable fats and oils — Sampling |
| PREN 16785-2 : DRAFT 2015 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 2: DETERMINATION OF THE BIO-BASED CONTENT USING THE MATERIAL BALANCE METHOD |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| ISO 1716:2010 | Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value) |
| EN ISO 4257:2001 | Liquefied petroleum gases - Method of sampling (ISO 4257:2001) |
| EN ISO 21068-2:2008 | Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon (ISO 21068-2:2008) |
| ISO 1928:2009 | Solid mineral fuels — Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value |
| ISO 10210:2012 | Plastics — Methods for the preparation of samples for biodegradation testing of plastic materials |
| ASTM C 224 : 1978 | PRACTICE FOR SAMPLING GLASS CONTAINERS |
| ISO 13833:2013 | Stationary source emissions — Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide — Radiocarbon sampling and determination |
| EN ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2013) |
| DIN 51637:2014-02 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE BIO-BASED HYDROCARBON CONTENT IN DIESEL FUELS AND MIDDLE DISTILLATES USING LIQUID SCINTILLATION METHOD |
| EN 15442:2011 | Solid recovered fuels - Methods for sampling |
| EN 14778:2011 | Solid biofuels - Sampling |
| EN 14780:2011 | Solid biofuels - Sample preparation |
| EN 16785-1:2015 | Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
| EN 15443:2011 | Solid recovered fuels - Methods for the preparation of the laboratory sample |
| EN ISO 13833:2013 | Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Radiocarbon sampling and determination (ISO 13833:2013) |
| ASTM C 322 : 2009 | Standard Practice for Sampling Ceramic Whiteware Clays |
| EN 15400:2011 | Solid recovered fuels - Determination of calorific value |
| ISO 1795:2017 | Rubber, raw natural and raw synthetic — Sampling and further preparative procedures |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes — Sampling |
| ISO 4257:2001 | Liquefied petroleum gases — Method of sampling |
| ISO 21068-2:2008 | Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon |
| ASTM D 6085 : 1997 | Standard Practice for Sampling in Rubber Testing--Terminology and Basic Concepts |
| ISO 186:2002 | Paper and board — Sampling to determine average quality |
| ASTM C 172/C172M : 2017 : REDLINE | Standard Practice for Sampling Freshly Mixed Concrete |
| ASTM D 3437 : 2015 : REDLINE | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| EN 27213:1993 | Pulps - Sampling for testing (ISO 7213:1981) |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ASTM D 7026 : 2013 | Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis (Withdrawn 2020) |
| EN ISO 186:2002 | Paper and board - Sampling to determine average quality (ISO 186:2002) |
| EN 16575:2014 | Bio-based products - Vocabulary |
| ISO 20904:2006 | Hard coal — Sampling of slurries |
| EN ISO 10715:2000 | Natural gas - Sampling guidelines (ISO 10715:1997) |
| ASTM D 5291 : 2016 : REDLINE | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants |
| ISO 18283:2006 | Hard coal and coke — Manual sampling |
| EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
| EN ISO 3170:2004 | Petroleum liquids - Manual sampling (ISO 3170:2004) |
| ASTM D 7718 : 2011 | Standard Practice for Obtaining In-Service Samples of Lubricating Grease |
| ASTM D 2915 : 2017 : REDLINE | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
| ISO 7213:1981 | Pulps — Sampling for testing |
| EN ISO 3171:1999 | Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.