UNI CEN/TS 16640 : 2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD
27-07-2017
01-01-2014
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Principle
6 Determination of the [14]C content
7 Calculation of the bio-based carbon content
8 Test report
Annex A (informative) - Procedures for sampling
of products
Annex B (normative) - Procedure for the conversion of
the carbon present in the sample to a
suitable sample for [14]C determination
Annex C (normative) - Method A - Liquid scintillation-counter
method (LSC)
Annex D (normative) - Method B - Beta-ionization (BI)
Annex E (normative) - Method C - Accelerator Mass
Spectrometry (AMS)
Annex F (informative) - Definitions and formulae of the
[14]C based method
Bibliography
Describes a method for the determination of the bio-based carbon content in products, based on the [14]C content measurement.
| Committee |
E09.24
|
| DocumentType |
Standard
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| CEN/TS 16640:2014 | Identical |
| CEN/TS 16137:2011 | Plastics - Determination of bio-based carbon content |
| ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
| EN 15440 : 2011 COR 2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF BIOMASS CONTENT |
| ISO 10715:1997 | Natural gas — Sampling guidelines |
| CEN/TR 14980:2004 | Solid recovered fuels - Report on relative difference between biodegradable and biogenic fractions of SRF |
| ISO 8943:2007 | Refrigerated light hydrocarbon fluids Sampling of liquefied natural gas Continuous and intermittent methods |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| PREN 16575 : DRAFT 2013 | BIO-BASED PRODUCTS - VOCABULARY |
| EN ISO 4257:2001 | Liquefied petroleum gases - Method of sampling (ISO 4257:2001) |
| ISO 1928:2009 | Solid mineral fuels Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value |
| ISO 10210:2012 | Plastics — Methods for the preparation of samples for biodegradation testing of plastic materials |
| ASTM C 224 : 1978 | PRACTICE FOR SAMPLING GLASS CONTAINERS |
| ISO 13833:2013 | Stationary source emissions Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide Radiocarbon sampling and determination |
| CEN/TR 15932:2010 | Plastics - Recommendation for terminology and characterisation of biopolymers and bioplastics |
| EN 13137:2001 | Characterization of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments |
| EN 15442:2011 | Solid recovered fuels - Methods for sampling |
| EN 14778:2011 | Solid biofuels - Sampling |
| EN 14780:2011 | Solid biofuels - Sample preparation |
| EN 15443:2011 | Solid recovered fuels - Methods for the preparation of the laboratory sample |
| EN ISO 13833:2013 | Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Radiocarbon sampling and determination (ISO 13833:2013) |
| ASTM C 322 : 2009 | Standard Practice for Sampling Ceramic Whiteware Clays |
| EN 15400:2011 | Solid recovered fuels - Determination of calorific value |
| ISO 1795:2017 | Rubber, raw natural and raw synthetic — Sampling and further preparative procedures |
| ISO 4257:2001 | Liquefied petroleum gases Method of sampling |
| ASTM D 6085 : 1997 | Standard Practice for Sampling in Rubber Testing--Terminology and Basic Concepts |
| ISO 186:2002 | Paper and board — Sampling to determine average quality |
| CEN/TR 15591:2007 | Solid recovered fuels - Determination of the biomass content based on the 14C method |
| ASTM D 3437 : 2015 : REDLINE | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| EN 27213:1993 | Pulps - Sampling for testing (ISO 7213:1981) |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ASTM D 7026 : 2013 | Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis (Withdrawn 2020) |
| EN ISO 186:2002 | Paper and board - Sampling to determine average quality (ISO 186:2002) |
| ISO 20904:2006 | Hard coal Sampling of slurries |
| EN ISO 10715:2000 | Natural gas - Sampling guidelines (ISO 10715:1997) |
| ASTM D 5291 : 2016 : REDLINE | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants |
| ISO 18283:2006 | Hard coal and coke Manual sampling |
| EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
| EN ISO 3170:2004 | Petroleum liquids - Manual sampling (ISO 3170:2004) |
| ISO 7213:1981 | Pulps Sampling for testing |
| EN ISO 3171:1999 | Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.