UNI EN 10255 : 2007
Current
The latest, up-to-date edition.
NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS
28-08-2007
PREMESSA
1 SCOPO E CAMPO DI APPLICAZIONE
2 RIFERIMENTI NORMATIVI
3 TERMINI E DEFINIZIONI
4 CLASSIFICAZIONE E DESIGNAZIONE
5 INFORMAZIONI DA OTTENERE DAL COMMITTENTE
6 PROCESSO DI FABBRICAZIONE
7 CONDIZIONI DI FORNITURA
8 REQUISITI
9 CONTROLLO
10 MARCATURA
11 RIVESTIMENTO DI PROTEZIONE TEMPORANEO
12 VALUTAZIONE DELLA CONFORMITA
APPENDICE A (informativa) - CORRELAZIONE TRA IL DIAMETRO
ESTERNO SPECIFICATO, LE DIMENSIONI DELLA FILETTATURA
E IL DIAMETRO NOMINALE
APPENDICE B (normativa) - TIPI DI TUBI CON SPESSORE DI PARETE
DIVERSO DALLE SERIE MEDIA E PESANTE
APPENDICE ZA (informativa) - PUNTI DELLA PRESENTE NORMA
EUROPEA RIGUARDANTI LE DISPOSIZIONI DELLA DIRETTIVA
CE RELATIVA AI PRODOTTI DA COSTRUZIONE PER LE
APPLICAZIONI CONTEMPLATE DAL MANDATO M/131
Describes the requirements for circular non-alloy steel tubes suitable for welding and threading and provides a number of options for the finish of tube ends and coatings. Also includes tubes of specified outside diameter 10,2 mm to 165,1 mm (thread size 1/8, to 6) in two series, medium and heavy, and three types of designated thicknesses.
| Committee |
CT 700
|
| DevelopmentNote |
Supersedes UNI 8863. (01/2005)
|
| DocumentType |
Standard
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 10255:2005 | Identical |
| DIN EN 10255:2015-05 (Draft) | Identical |
| NF EN 10255 : 2005 + A1 2007 | Identical |
| BS EN 10255:2004 | Identical |
| NS EN 10255 : 2004 + A1 2007 | Identical |
| NEN EN 10255 : 2004 + A1 2007 | Identical |
| SN EN 10255 : 2004 + A1 2007 | Identical |
| EN 10255:2004+A1:2007 | Identical |
| NBN EN 10255 : 2004 + A1 2007 | Identical |
| I.S. EN 10255:2004 | Identical |
| DIN EN 10255:2007-07 | Identical |
| UNI 9736 : 2014 | FITTINGS MANUFACTURED WITH MIXED JUNCTION, METAL-POLYETHYLENE, FOR USE IN PIPELINES FOR THE SUPPLY OF GASEOUS FUELS, WATER AND OTHER FLUIDS UNDER PRESSURE AND METAL-POLYPROPYLENE PIPES FOR WATER SUPPLY AND OTHER FLUIDS UNDER PRESSURE - REQUIREMENTS, TESTING, FITNESS FOR PURPOSE AND ASSESSMENT OF CONFORMITY |
| UNI 10779 : 2014 | FIRE FIGHTING EQUIPMENT - HYDRANT SYSTEMS - DESIGN, INSTALLATION AND OPERATION |
| UNI 7133-4 : 2012 | GAS ODORISATION FOR DOMESTIC AND SIMILAR USES - PART 4: ODORANT REQUIREMENTS |
| UNI 11528 : 2014 | GAS PLANTS OVER 35 KW - DESIGN, INSTALLATION AND COMMISSIONING |
| UNI 11179 : 2006 | FITTINGS WITH PRESS-ENDS FOR METALLIC PIPING |
| UNI 9721 : 2009 | VEHICLES DITCHES - BUILDING CRITERIA AND DEVICES FOR PEOPLE SAFETY |
| EN 10240:1997 | Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10246-1:1996 | Non destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness |
| EN 10226-2:2005 | Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| ISO 8491:1998 | Metallic materials Tube (in full section) Bend test |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| EN ISO 2566-1:1999 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10021:2006 | General technical delivery conditions for steel products |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| EN 10241:2000 | Steel threaded pipe fittings |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN ISO 8491:2004 | Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998) |
| ISO 8492:2013 | Metallic materials Tube Flattening test |
| EN 10020:2000 | Definition and classification of grades of steel |
| EN ISO 8492:2013 | Metallic materials - Tube - Flattening test (ISO 8492:2013) |
| EN 10266:2003 | Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
| EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.