UNI EN 13240 : 2006
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
ROOM-HEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
23-07-2013
01-01-2006
PREMESSA ALLA NORMA EN 13240
PREMESSA ALL'AGGIORNAMENTO A2
1 SCOPO E CAMPO DI APPLICAZIONE
2 RIFERIMENTI NORMATIVI
3 TERMINI E DEFINIZIONI
4 MATERIALI, PROGETTAZIONE E COSTRUZIONE
5 REQUISITI DI SICUREZZA
6 REQUISITI DI PRESTAZIONE
7 ISTRUZIONI DELL'APPARECCHIO
8 MARCATURA
9 VALUTAZIONE DI CONFORMITA
APPENDICE A (normativa) - METODI DI PROVA
APPENDICE B (normativa) - COMBUSTIBILI DI PROVA E COMBUSTIBILI
RACCOMANDATI
APPENDICE ZA (informativa) - PUNTI DELLA PRESENTE NORMA
EUROPEA RIGUARDANTI LE DISPOSIZIONI DELLA
DIRETTIVA UE RELATIVA AI PRODOTTI DA COSTRUZIONE
BIBLIOGRAFIA
Gives requirements relating to the design, manufacture, construction, performance, safety, instruction and marking together with associated test methods and test fuels for type testing residential roomheaters fired by solid fuels.
| DocumentType |
Standard
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Withdrawn
|
| Standards | Relationship |
| ONORM EN 13240 : 2007 | Identical |
| NF EN 13240 : 2002 AMD 2 2005 | Identical |
| NBN EN 13240 : 2002 COR 2006 | Identical |
| NEN EN 13240 : 2001 AMD 2/C2 2007 | Identical |
| NS EN 13240 : 2001 AC 2007 | Identical |
| I.S. EN 13240:2001 | Identical |
| SN EN 13240 : 2001 CORR 2007 | Identical |
| BS EN 13240 : 2001 | Identical |
| DIN EN 13240:2005-10 | Identical |
| DIN EN 13240:2002-02 | Identical |
| UNE-EN 13240:2002 | Identical |
| UNI 10683 : 2012 | HEATING APPLIANCES FIRED BY WOOD OR OTHER SOLID BIOFUELS - INSTALLATION REQUIREMENTS |
| UNI 11518 : 2013 | ETHANOL FIRED APPLIANCES - REQUIREMENTS AND TEST METHODS |
| UNI/TS 11300-4 : 2012 | ENERGY PERFORMANCE OF BUILDINGS - PART 4: RENEWABLE ENERGY AND OTHER GENERATION SYSTEMS FOR SPACE HEATING AND DOMESTIC HOT WATER PRODUCTION |
| UNI 10412-2 : 2009 | HOT WATER HEATING SYSTEMS - SAFETY REQUIREMENTS - PART 2: REQUIREMENTS FOR SYSTEMS WITH RESIDENTIAL SOLID FUELS BURNING APPLIANCES WITH BOILER, NOT EXCEEDING A TOTAL NOMINAL HEAT OUTPUT OF 35 KW |
| EN 10120:2017 | Steel sheet and strip for welded gas cylinders |
| EN 50165 : 97 AMD 1 2001 | ELECTRICAL EQUIPMENT ON NON-ELECTRIC APPLIANCES FOR HOUSEHOLD AND SIMILAR PURPOSES - SAFETY REQUIREMENTS |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
| ISO 1928:2009 | Solid mineral fuels Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value |
| ISO 334:2013 | Solid mineral fuels Determination of total sulfur Eschka method |
| EN 10111:2008 | Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| ISO 7-2:2000 | Pipe threads where pressure-tight joints are made on the threads Part 2: Verification by means of limit gauges |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 10028-2:2017 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| ISO 331:1983 | Coal Determination of moisture in the analysis sample Direct gravimetric method |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 1563:2011 | Founding - Spheroidal graphite cast irons |
| ISO 687:2010 | Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample |
| ISO 501:2012 | Hard coal — Determination of the crucible swelling number |
| ISO 228-2:1987 | Pipe threads where pressure-tight joints are not made on the threads Part 2: Verification by means of limit gauges |
| ISO 1171:2010 | Solid mineral fuels — Determination of ash |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 562:2010 | Hard coal and coke — Determination of volatile matter |
| EN 1561:2011 | Founding - Grey cast irons |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.