UNI EN 15091 : 2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE
30-04-2024
23-01-2014
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements and testing
5 Requirements and testing for tapware
6 Requirements and testing for flushing
valves for urinals
7 Requirements and testing for flushing
valves for WCs
Annex A (normative) - Design of pressure
take-off tees
Annex B (informative) - Potential consequences
of use outside the recommended
operating limits
Bibliography
Specifies requirements for marking, identification, leaktightness, electrical and operational safety and mechanical resistance for sanitary tapware with opening and closing controlled electronically.
| Committee |
CT 33
|
| DocumentType |
Standard
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN EN 15091:2014-03 | Identical |
| NF EN 15091 : 2014 | Identical |
| NBN EN 15091 : 2014 | Identical |
| NEN EN 15091 : 2013 | Identical |
| NS EN 15091 : 2013 | Identical |
| I.S. EN 15091:2013 | Identical |
| SN EN 15091 : 2013 | Identical |
| BS EN 15091:2013 | Identical |
| EN 15091:2013 | Identical |
| ONORM EN 15091 : 2014 | Identical |
| UNI 9182 : 2014 | HOT AND COLD WATER SUPPLY AND DISTRIBUTION INSTALLATIONS - DESIGN, INSTALLATION AND TESTING |
| EN 35:2014 | Pedestal and wall-hung bidets with over-rim supply - Connecting dimensions |
| EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
| EN 246:2003 | Sanitary tapware - General specifications for flow rate regulators |
| EN 61000-6-3:2007/A1:2011/AC:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
| EN 36:1998 | Wall-hung bidets with overrim supply - Connecting dimensions |
| EN 13618:2016 | Flexible hose assemblies in drinking water installations - Functional requirements and test methods |
| EN 13407:2015 | Wall-hung urinals - Functional requirements and test methods |
| EN 695:2005 | Kitchen sinks - Connecting dimensions |
| EN 12541:2002 | Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10 |
| EN 31:2011+A1:2014 | Wash basins - Connecting dimensions |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| IEC 61000-6-3:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
| EN ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
| EN 60730-2-8:2002/A1:2003 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-8: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED WIRE VALVES, INCLUDING MECHANICAL REQUIREMENTS |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60730-2-8:2000+AMD1:2002+AMD2:2015 CSV | Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated watervalves, including mechanical requirements |
| ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
| IEC 61000-6-1:2016 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
| EN 13959:2004 | Anti-pollution check valves - DN 6 to DN 250 inclusive family E, type A, B, C and D |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN 248:2002 | Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr |
| EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.