VDE 0420-1 : 94 AMD 2 99
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ELECTRONIC RIPPLE CONTROL RECEIVERS FOR TARIFF AND LOAD CONTROL
01-06-2005
12-01-2013
Vorwort
Erklärung
Anerkennungsnotiz
Einleitung
Abschnitt
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Anforderungen
5 Prüfungen und Prüfbedingungen
Anhänge (normativ)
Anhang A Beziehung zwischen Umgebungstemperatur und
relativer Luftfeuchte
Anhang B Bezugs- und Grenzwerte der Einflussgrössen
Anhang C Elektromagnet für die Prüfung der
Beeinflussung durch äussere Magnetfelder
Anhang D Oberschwingungspegel
Anhang E Frequenzen für die Prüfung mit
Oberschwingungen
Anhang F Parameterkombination bei den Funktions- und
Nichtfunktionsprüfungen
Anhang ZA Andere in dieser Norm zitierte internationale
Publikationen mit den Verweisungen der
entsprechenden europäischen Publikationen
Anhänge (informativ)
Anhang G Annahmeprüfungen
Anhang H Begriffe zum Impulsraster
Anhang J Beispiele eines Prüfaufbaus
Anhang K Werte der Einflussgrösse bei den
verschiedenen Prüfungen
| DocumentType |
Standard
|
| PublisherName |
Verband Deutscher Elektrotechniker
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN EN 61037 : 1994 AMD 2 1999 | Identical |
| IEC 61037:1990+AMD1:1996+AMD2:1998 CSV | Identical |
| EN 61037:1992/A2:1998 | Identical |
| DIN EN 61037 : 1994 AMD 2 1999 | Corresponds |
| DIN IEC 60038 : 2002 | IEC STANDARD VOLTAGES |
| DIN VDE 0110-2 : 1989 | ISOLATIONSKOORDINATION FUER ELEKTRISCHE BETRIEBSMITTEL IN NIEDERSPANNUNGSANLAGEN; BEMESSUNG DER LUFT- UND KRIECHSTRECKEN |
| IEC 60695-2-1:1991 | Fire hazard testing - Part 2: Test methods - Section 1: Glow-wire test and guidance |
| DIN IEC 60068-2-27:1989-08 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST Ea AND GUIDANCE; SHOCK |
| DIN IEC 60068-2-1:1985-08 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TESTS A: COLD |
| DIN VDE 0110-1 : 1997 | INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS |
| DIN IEC 60068-2-30:1986-09 | ELECTRICAL ENGINEERING - BASIC ENVIRONMENTAL TESTING PROCEDURES - TEST DB AND GUIDANCE - DAMP HEAT, CYCLIC (12 + 12 HOUR CYCLE) |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| DIN VDE 0843-3 : 1988 | ELECTROMAGNETIC COMPATIBILITY FOR INDUSTRIAL PROCESS MEASUREMENT AND CONTROL EQUIPMENT - RADIATED ELECTROMAGNETIC FIELD REQUIREMENTS |
| IEC 60801-4:1988 | Electromagnetic compatibility for industrial-process measurement and control equipment - Part 4: Electrical fast transient/burst requirements |
| DIN VDE 0843-2 : 1987 | ELECTROMAGNETIC COMPATIBILITY FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL EQUIPMENT - ELECTROSTATIC DISCHARGE REQUIREMENTS |
| IEC 60817:1984 | Spring-operated impact-test apparatus and its calibration |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60269-3:2010+AMD1:2013 CSV | Low-voltage fuses - Part 3: Supplementary requirements for fuses foruse by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F |
| DIN VDE 0636-10 : 1992 | LOW-VOLTAGES FUSES; GENERAL REQUIREMENTS |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| DIN IEC 60721-3-3:1990-04 | ELECTRICAL ENGINEERING; CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES; STATIONARY USE AT WEATHER PROTECTED LOCATIONS |
| IEC 60801-3:1984 | Electromagnetic compatibility for industrial-process measurement and control equipment - Part 3: Radiated electromagnetic field requirements |
| IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV | Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations |
| DIN 40080:1979-04 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
| DIN IEC 60068-2-2:1980-03 | BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TESTS B: DRY HEAT |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| IEC 60801-2:1991 | Electromagnetic compatibility for industrial-process measurement and control equipment - Part 2: Electrostatic discharge requirements |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.