VDI 2055 Blatt 2:2013-10
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Thermal insulation of heated and refrigerated operational installations in the industry and in the building services - Technical basics for the verification of properties of insulating materials
Available format(s)
Hardcopy , PDF
Superseded date
11-09-2021
Superseded by
Language(s)
German - English
Published date
01-10-2013
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Preliminary Note
Introduction
1. Scope
2. Normative references
3. Terms and definitions
4. Abbreviations
5. Insulation Materials
6. Conformity proving methods, quality
assurance and certification
7. Acceptance procedure for test-, inspection-,
and certification bodies according to QAC
8. Conditions for the delivery of materials
and the execution of works
Annex A - Procedures to measure thermal
conductivity
Annex B - Recommendations for the treatment
of innovative insulation systems
Annex C - Relation of European classes
to the requirements according to
German building regulations
Bibliography
Describes the testing of properties of insulation materials, which are employed in operational installations in industry and in the building services.
| DevelopmentNote |
Supersedes VDI 2055. (01/2014)
|
| DocumentType |
Standard
|
| Pages |
0
|
| PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| EN 14304:2015 | Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification |
| VDI 2050 Blatt 1.1:2017-07 | Requirements for technical equipment rooms - Space for service shafts |
| VDI 2055-3 : 2011 COR 2012 | THERMAL INSULATION OF HEATED AND REFRIGERATED OPERATIONAL INSTALLATIONS IN THE INDUSTRY AND THE BUILDING SERVICES - TECHNICAL BASICS FOR THE VERIFICATION OF THERMOTECHNICAL PROPERTIES OF INSULATION SYSTEMS, DETERMINATION OF TOTAL HEAT LOSSES |
| DIN EN 14313:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
| DIN EN 14304:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
| BS EN 14304 : 2009 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
| DIN 1961:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART B: GENERAL CONDITIONS OF CONTRACT RELATING TO THE EXECUTION OF CONSTRUCTION WORK |
| DIN EN 13472:2013-01 | Thermal insulating products for building equipment and industrial installations - Determination of short term water absorption by partial immersion of preformed pipe insulation |
| ISO/IEC 17065:2012 | Conformity assessment — Requirements for bodies certifying products, processes and services |
| EN 14304:2015 | Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| DIN EN 825:2013-05 | Thermal insulating products for building applications - Determination of flatness |
| EN 15603:2008 | Energy performance of buildings - Overall energy use and definition of energy ratings |
| DIN EN 823:2013-05 | Thermal insulating products for building applications - Determination of thickness |
| EN 14706:2012 | Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature |
| DIN EN ISO 9080:2013-02 | PLASTICS PIPING AND DUCTING SYSTEMS - DETERMINATION OF THE LONG-TERM HYDROSTATIC STRENGTH OF THERMOPLASTICS MATERIALS IN PIPE FORM BY EXTRAPOLATION (ISO 9080:2012) |
| EN 14309:2015 | Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification |
| EN 13820:2003 | Thermal insulating materials for building applications - Determination of organic content |
| EN 13471:2001 | Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion |
| DIN EN 13467:2016-09 (Draft) | THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF DIMENSIONS, SQUARENESS AND LINEARITY OF PREFORMED PIPE INSULATION |
| DIN EN 45020:2007-03 | STANDARDIZATION AND RELATED ACTIVITIES - GENERAL VOCABULARY |
| EN ISO 8497:1996 | Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes (ISO 8497:1994) |
| DIN EN ISO 846:1997-10 | PLASTICS - EVALUATION OF THE ACTION OF MICROORGANISMS |
| DIN EN 14308:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - SPECIFICATION |
| EN ISO 4590:2016 | Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016) |
| EN 13469:2012 | Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation |
| AGI Q 134-1 : 1987 | HALBHARTE SCHAUMSTOFFE ALS DAEMMSTOFFE FUER BETRIEBSTECHNISCHE ANLAGEN; POLYETHYLEN (PE)-SCHAUMSTOFF |
| DIN 18421:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - INSULATION OF SERVICE INSTALLATIONS |
| EN 824:2013 | Thermal insulating products for building applications - Determination of squareness |
| ISO 4590:2016 | Rigid cellular plastics Determination of the volume percentage of open cells and of closed cells |
| DIN EN 13823:2015-02 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
| EN 14307:2015 | Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification |
| DIN EN 14304:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
| EN 14314:2015 | Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification |
| DIN ISO 16000-6:2012-11 | Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA? sorbent, thermal desorption and gas chromatography using MS or MS-FID (ISO 16000-6:2011) |
| EN 825:2013 | Thermal insulating products for building applications - Determination of flatness |
| AGI Q 138 : 1996 | POLYURETHANE(PUR)-IN-SITU FOAM WATER/CO[2] BLOWN FOR THERMAL AND COLD INSULATIONS IN INDUSTRIAL INSTALLATIONS - PROPERTIES, FABRICATION, EXECUTION OF INSULATION SYSTEMS |
| ISO 9080:2012 | Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation |
| ISO 9053:1991 | Acoustics Materials for acoustical applications Determination of airflow resistance |
| EN 823:2013 | Thermal insulating products for building applications - Determination of thickness |
| DIN EN ISO 12572:2015-01 (Draft) | HYGROTHERMAL PERFORMANCE OF BUILDING MATERIALS AND PRODUCTS - DETERMINATION OF WATER VAPOUR TRANSMISSION PROPERTIES - CUP METHOD (ISO 12572:2016) |
| EN 14308:2015 | Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification |
| DIN EN 824:2013-05 | Thermal insulating products for building applications - Determination of squareness |
| VDI 2055 Blatt 1:2008-09 | Thermal insulation of heated and refrigerated operational installations in the industry and the building services - Calculation rules |
| EN 13470:2001 | Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation |
| DIN EN 14707:2013-01 | Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation |
| CEN/TS 15548-1:2014 | Thermal insulation products for building equipment and industrial installations - Determination of thermal resistance by means of the guarded hot plate method - Part 1: Measurements at elevated temperatures from 100 °C to 850 °C |
| DIN EN ISO 16000-10:2006-06 | Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method (ISO 16000-10:2006) |
| EN ISO 9080:2012 | Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012) |
| DIN EN ISO/IEC 17020:2012-07 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR THE OPERATION OF VARIOUS TYPES OF BODIES PERFORMING INSPECTION (ISO/IEC 17020:2012) |
| DIN EN 15715:2010-04 | Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN 14306:2015 | Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification |
| DIN EN 14307:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
| DIN 4140:2014-04 | Insulation work on industrial installations and building equipment - Execution of thermal and cold insulations |
| DIN EN 14314:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| DIN ISO 16000-3:2013-01 | Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air - Active sampling method (ISO 16000-3:2011) |
| ISO 12572:2016 | Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method |
| EN 13472:2012 | Thermal insulating products for building equipment and industrial installations - Determination of short term water absorption by partial immersion of preformed pipe insulation |
| EN 14313:2015 | Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification |
| EN ISO 12572:2016 | Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) |
| EN ISO 16000-11:2006 | Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006) |
| VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
| DIN EN 14706:2013-01 | Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature |
| DIN EN 14305:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| ISO/IEC 17020:2012 | Conformity assessment — Requirements for the operation of various types of bodies performing inspection |
| AGI Q 02 : 2001 | INSULATION ON INDUSTRIAL INSTALLATIONS - TERMINOLOGY |
| ISO 17455:2005 | Plastics piping systems Multilayer pipes Determination of the oxygen permeability of the barrier pipe |
| DIN EN 14309:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION |
| AGI Q 132 : 2016 | MINERAL WOOL INSULATION MATERIAL FOR INDUSTRIAL INSTALLATIONS |
| DIN EN 13470:2001-12 | Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation; English version of DIN EN 13470 |
| EN ISO 16000-10:2006 | Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method (ISO 16000-10:2006) |
| EN 14707:2012 | Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation |
| DIN EN 13468:2001-12 | Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water-soluble chloride, fluoride, silicate, and sodium ions and pH; English version of DIN EN 13468 |
| ISO 16000-9:2006 | Indoor air — Part 9: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test chamber method |
| DIN EN ISO 16000-11:2006-06 | Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006) |
| DIN EN 14303:2016-08 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| AGI Q 142 : 1989 | |
| EN ISO/IEC 17065:2012 | Conformity assessment - Requirements for bodies certifying products, processes and services (ISO/IEC 17065:2012) |
| DIN EN 13471:2001-12 | Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion; GEnglish version of DIN EN 13471 |
| DIN CEN/TS 15548-1;DIN SPEC 18548-1:2014-11 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF THERMAL RESISTANCE BY MEANS OF THE GUARDED HOT PLATE METHOD - PART 1: MEASUREMENTS AT ELEVATED TEMPERATURES FROM 100 DEGREES C TO 850 DEGREES C |
| EN ISO 846:1997 | Plastics - Evaluation of the action of microorganisms (ISO 846:1997) |
| DIN 53428:2017-08 | Testing of cellular materials - Determination of the resistance to liquids, vapours, gases and solid materials |
| ISO 16000-3:2011 | Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air — Active sampling method |
| DIN EN ISO 4590:2014-06 (Draft) | RIGID CELLULAR PLASTICS - DETERMINATION OF THE VOLUME PERCENTAGE OF OPEN CELLS AND OF CLOSED CELLS (ISO 4590:2016) |
| AGI Q 143-1 : 2001 | FLEXIBLE FOAM MATERIAL AS INSULATION FOR INDUSTRIAL INSTALLATIONS - RETICULATED ELASTOMERICS |
| DIN EN ISO/IEC 17065:2013-01 | Conformity assessment - Requirements for bodies certifying products, processes and services (ISO/IEC 17065:2012); German and English version EN ISO/IEC 17065:2012 |
| DIN EN 14313:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
| ISO 16000-10:2006 | Indoor air — Part 10: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test cell method |
| DIN EN 822:2013-05 | Thermal insulating products for building applications - Determination of length and width |
| AGI Q 137 : 2015 | CELLULAR GLASS AS INSULATION MATERIAL FOR INDUSTRIAL INSTALLATIONS |
| ISO 16000-11:2006 | Indoor air — Part 11: Determination of the emission of volatile organic compounds from building products and furnishing — Sampling, storage of samples and preparation of test specimens |
| EN 15715:2009 | Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products |
| DIN EN 14306:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CALCIUM SILICATE (CS) PRODUCTS - SPECIFICATION |
| DIN EN 826:2013-05 | Thermal insulating products for building applications - Determination of compression behaviour |
| DIN EN 13469:2013-01 | Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation |
| ISO 16000-6:2011 | Indoor air Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID |
| EN 13172:2012 | Thermal insulation products - Evaluation of conformity |
| EN 14303:2015 | Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification |
| EN 14305:2015 | Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification |
| EN ISO 175:2010 | Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010) |
| EN ISO/IEC 17020:2012 | Conformity assessment - Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012) |
| DIN EN 13501-1:2010-01 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS |
| DIN EN 13172:2012-04 | THERMAL INSULATION PRODUCTS - EVALUATION OF CONFORMITY |
| EN 822:2013 | Thermal insulating products for building applications - Determination of length and width |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.