VDI 2441:2016-05
Current
Current
The latest, up-to-date edition.
Process gas and waste gas cleaning by cold plasma - Barrier discharge, corona discharge, UV radiation
Available format(s)
Hardcopy , PDF
Language(s)
German - English
Published date
01-05-2016
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Preliminary note
1 Scope
2 Terms and definitions
3 Symbols
4 Ionisation and plasma
5 Process modules
6 Notes on system design and configuration
7 Emission measurement instructions
8 Notes on technical warranty/guaranteed
performance data
9 Example systems
Bibliography
Gives information on the design, construction and operation of non-thermal plasma systems for air pollution control applications.
| DocumentType |
Standard
|
| Pages |
52
|
| PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
| Status |
Current
|
| Supersedes |
| DIN EN 13725:2003-07 | Air quality - Determination of odour concentration by dynamic olfactometry |
| VDI 3928:2017-01 | Waste gas cleaning by chemisorption |
| VDI 2260:2003-10 | Technical warranty for gas cleaning equipment - Particulate and gaseous matter |
| DIN EN 50290-1-2:2005-10 | COMMUNICATION CABLES - PART 1-2: DEFINITIONS |
| EN 60873-2:2004 | Electrical and pneumatic analogue chart recorders for use in industrial process control systems - Part 2: Guidance for inspection and routine testing |
| IEC 60873-2:2004 | Electrical and pneumatic analogue chart recorders for use in industrial process control systems - Part 2: Guidance for inspection and routine testing |
| ISO 23210:2009 | Stationary source emissions Determination of PM10/PM2,5 mass concentration in flue gas Measurement at low concentrations by use of impactors |
| DIN EN 14791:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF SULPHUR OXIDES - STANDARD REFERENCE METHOD |
| EN 14791:2017 | Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method |
| IEC 60050-845:1987 | International Electrotechnical Vocabulary (IEV) - Part 845: Lighting |
| VDI 2310 Blatt 15:2001-12 | Maximum immission values referring to human health - Maximum immission concentrations for ozone |
| CEN/TS 13649:2014 | Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption |
| VDI 3880:2011-10 | Olfactometry - Static sampling |
| DIN EN 14790:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE WATER VAPOUR IN DUCTS - STANDARD REFERENCE METHOD |
| DIN EN 1911:2010-12 | Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method |
| VDI 3882 Blatt 2:1994-09 | Olfactometry - Determination of hedonic odour tone |
| VDI 3476 Blatt 1:2015-06 | Waste gas cleaning - Methods of catalytic waste gas cleaning - Fundamentals |
| EN 14789:2017 | Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism |
| EN 14625:2012 | Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry |
| DIN CEN/TS 13649;DIN SPEC 33969:2015-03 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF INDIVIDUAL GASEOUS ORGANIC COMPOUNDS - SORPTIVE SAMPLING METHOD FOLLOWED BY SOLVENT EXTRACTION OR THERMAL DESORPTION |
| EN 13284-1:2017 | Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method |
| VDI 3884 Blatt 1:2015-02 | Olfactometry - Determination of odour concentration by dynamic olfactometry - Supplementary instructions for application of DIN EN 13725 |
| VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
| DIN EN 14625:2012-12 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF OZONE BY ULTRAVIOLET PHOTOMETRY |
| DIN EN ISO 23210:2009-12 | Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009) |
| EN 12753:2005+A1:2010 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements |
| EN 15058:2017 | Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry |
| EN 60873-1:2004 | Electrical and pneumatic analogue chart recorders for use in industrial-process control systems - Part 1: Methods for performance evaluation |
| VDE 0410-1 : 2004 | ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION |
| EN 12619:2013 | Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method |
| DIN EN 13284-1:2015-12 (Draft) | STATIONARY SOURCE EMISSIONS - DETERMINATION OF LOW RANGE MASS CONCENTRATION OF DUST - PART 1: MANUAL GRAVIMETRIC METHOD |
| EN 1911:2010 | Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method |
| EN 50290-1-2:2004 | Communication cables - Part 1-2: Definitions |
| DIN EN 60873-1 : 2004 | ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION |
| DIN EN 12619:2013-04 | Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method |
| DIN EN 12753:2011-02 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (includes Amendment A1:2010) |
| VDI 3951:2013-09 | Overview on relevant regulations on the performance of emission measurements |
| EN 14790:2017 | Stationary source emissions - Determination of the water vapour in ducts - Standard reference method |
| VDE 0410-2 : 2004 | ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING |
| DIN EN 14789:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM |
| PREN 13649 : DRAFT 2011 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF INDIVIDUAL GASEOUS ORGANIC COMPOUNDS - ACTIVATED CARBON AND SOLVENT DESORPTION METHOD |
| DIN EN 15058:2006-09 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF CARBON MONOXIDE - STANDARD REFERENCE METHOD: NON-DISPERSIVE INFRARED SPECTROMETRY |
| VDI 3477:2016-03 | Biological waste gas purification - Biofilters |
| DIN EN 60873-2 : 2004 | ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING |
| DIN EN 13725:2003-07 | Air quality - Determination of odour concentration by dynamic olfactometry |
| VDI 3882 Blatt 1:1992-10 | Olfactometry; determination of odour intensity |
| VDI 2066 Blatt 1:1975-10 | Particulate matter measurement; measuring of particulate matter in flowing gases; gravimetric determination of dust load; fundamentals |
| EN ISO 23210:2009 | Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009) |
| VDI 3478 Blatt 2:2008-04 | Biological waste gas purification - Biological trickle bed-reactors |
| DIN EN 14792:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF NITROGEN OXIDES - STANDARD REFERENCE METHOD: CHEMILUMINESCENCE |
| EN 14792:2017 | Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence |
| IEC 60873-1:2003 | Electrical and pneumatic analogue chart recorders for use in industrial-process systems - Part 1: Methods for performance evaluation |
| VDI 3478 Blatt 1:2011-03 | Biological waste gas purification - Bioscrubbers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.