Skip to content
Please enter a keyword to search

  • EN 15058:2017

    Current The latest, up-to-date edition.

    Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry

    Available format(s): 

    Language(s): 

    Published date:  11-01-2017

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Abstract - (Show below) - (Hide below)

    This European Standard specifies the standard reference method (SRM) based on the infra-red (IR) absorption principle. It includes the sampling and the gas conditioning system, and allows the determination of the carbon monoxide CO in flue gases emitted to the atmosphere from ducts and stacks.This European Standard specifies the characteristics to be determined and the performance criteria to be fulfilled by measuring systems using the IR measurement method. It applies for periodic monitoring and for the calibration or control of automatic measuring systems (AMS) permanently installed on a stack, for regulatory or other purposes. This European Standard specifies criteria for demonstration of equivalence of an alternative method (AM) to the SRM by application of prEN 14793.This European Standard has been validated during field tests on waste incineration, co-incineration and large combustion plants and on a recognized test bench. It has been validated for CO concentrations with sampling periods of 30 min in the range of 0 mg/m3 to 400 mg/m3 for large combustion plants and 0 mg/m3 to 740 mg/m3 for waste and co-incineration. Directive 2010/75/EC lays down emission values which are expressed in mg/m3, on dry basis at a specified value of oxygen and at standard conditions of 273 K and 101,3 kPa.NOTE The characteristics of installations, the conditions during field tests and the values of repeatability and reproducibility in the field are given in Annex A.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes PREN 15058. (01/2017)
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS EN 19694-3:2016 Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries Cement industry
    I.S. EN 16738:2015 EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - TEST METHODS
    UNE-EN 14181:2015 Stationary source emissions - Quality assurance of automated measuring systems
    BS EN 14181:2014 Stationary source emissions. Quality assurance of automated measuring systems
    BS EN 303-5:2012 Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking
    BS EN 16738:2015 Emission safety of combustible air fresheners. Test methods
    DIN EN 15267-4:2015-08 (Draft) AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCES
    PREN 303-5 : DRAFT 2010 CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
    UNE-EN 15267-4:2018 Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
    I.S. EN 19694-3:2016 STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 3: CEMENT INDUSTRY
    DIN EN 303-5:2012-10 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
    I.S. EN 303-5:2012 HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
    I.S. EN 14181:2014 STATIONARY SOURCE EMISSIONS - QUALITY ASSURANCE OF AUTOMATED MEASURING SYSTEMS
    VDI 3890:2016-03 Emission control - Pet cremation facilities
    VDI 3461:2016-09 (Draft) Emission control - Thermochemical gasification of biomass in cogeneration
    VDI 3460 Blatt 1:2014-02 Emission control - Thermal waste treatment - Fundamentals
    VDI 3469 Blatt 6:2008-01 Emission control - Production and processing of fibrous materials - Mineral wool insulating materials
    VDI 3469 Blatt 4:2008-11 Emission control - Production and processing of fi-brous materials - Friction linings
    VDI 2441:2016-05 Process gas and waste gas cleaning by cold plasma - Barrier discharge, corona discharge, UV radiation
    VDI 3891:2015-07 Emission control - Human cremation facilities
    VDI 3899 Blatt 1:2016-05 Emission control - Landfill gas - Utilisation and treatment of landfill gas
    VDI 2293:2011-09 Emission control - Coal preparation plants including driers
    VDI 2447:2011-04 Emission control - Plants to the production and processing of acrylonitrile (AN)
    VDI 3896:2015-10 Emission control - Preparation of biogas to natural gas quality
    VDI 2576:2010-01 Emission control - Carbothermic and metallothermic production of ferroalloys and silicon metal
    VDI 3892:2015-03 Emission control - Roasted-coffee-producing industry - Plants with a minimum daily output of at least 0,5 tonnes
    VDI 2595 Blatt 2:2010-03 Emission control - Smokehouses for fish
    VDI 2578:2017-05 Emission control - Glassworks
    VDI 2595 Blatt 1:2010-03 Emission control - Smokehouses - Food, except for fish
    VDI 2095 Blatt 1:2011-03 Emission control - Treatment of mineral construction-site and demolition waste - Stationary and mobile demolition waste recycling facilities
    VDI 2102 Blatt 1:2007-04 (Draft) Emission control - Secondary copper smelting and refining plants
    VDI 3455:2013-08 Emission control - High-volume car body painting plants
    VDI 3898:2013-01 Emission control - Plants for dry mechanical, physio-chemical, thermal and biological soil treatment
    VDI 2102 Blatt 2:2013-04 Emission control - Copper and copper alloy melting plants
    VDI 3475 Blatt 5:2015-10 Emission control - Biological waste treatment facilities - Anaerobic digestion and post-treatment
    VDI 3454 Blatt 2:2012-04 Emission control - Claus units - Emission measurement
    VDI 3476 Blatt 2:2010-01 Waste gas cleaning - Catalytic waste gas cleaning methods - Oxidative processes
    14/30298789 DC : 0 BS EN 16738 - EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - TEST METHODS
    DIN EN 16738 E : 2016 EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - TEST METHODS
    BS EN 15267-4:2017 Air quality. Certification of automated measuring systems Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
    UNI EN 303-5 : 2012 HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
    10/30228886 DC : 0 BS EN 303-5 - CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
    I.S. EN 15267-4:2017 AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCES
    UNE-EN 16738:2016 Emission safety of combustible air fresheners - Test methods
    DIN EN 14181:2015-02 Stationary source emissions - Quality assurance of automated measuring systems
    EN 303-5:2012 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
    DIN EN 16738:2016-04 EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - TEST METHODS
    PREN 16738 : DRAFT 2014 EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - TEST METHODS
    S.R. CWA 16060:2009 ENVIRONMENTAL TECHNOLOGY VERIFICATION - AIR EMISSION ABATEMENT TECHNOLOGIES
    EN 19694-3 : 2016 STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 3: CEMENT INDUSTRY
    EN 16738:2015 Emission safety of combustible air fresheners - Test methods
    EN 15267-4:2017 Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
    EN 14181:2014 Stationary source emissions - Quality assurance of automated measuring systems
    UNE-CWA 16060:2010 IN Environmental technology verification - Air emission abatement technologies
    UNE-EN 303-5:2013 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 14956:2002 Air quality Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
    ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values
    EN 15259:2007 Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report
    ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
    EN ISO 14956 : 2002 AIR QUALITY - EVALUATION OF THE SUITABILITY OF A MEASUREMENT PROCEDURE BY COMPARISON WITH A REQUIRED MEASUREMENT UNCERTAINTY
    ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
    EN 14790:2017 Stationary source emissions - Determination of the water vapour in ducts - Standard reference method
    EN 15267-4:2017 Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
    ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
    EN 14793:2017 Stationary source emissions - Demonstration of equivalence of an alternative method with a reference method
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective