![header thumbnail](/images/publishers\vdi_cover.gif)
VDI 3475 Blatt 5:2015-10
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\vdi_cover.gif)
Emission control - Biological waste treatment facilities - Anaerobic digestion and post-treatment
Hardcopy , PDF
German - English
01-10-2015
Preliminary note
Introduction
1 Scope
2 Terms and definitions
3 Abbreviations
4 Legal framework
5 Fundamentals
6 Process technology
7 Relevant emissions and their sources
8 Emission prevention and control
9 Ambient air impact considerations
10 Notes on emission measurements
Bibliography
This standard covers biological waste treatment facilities for material recovery from wastes listed in Annex 1 to the German Biowaste Ordinance (BioAbfV) or the Animals Byproducts Ordinance (TierNebV) and the EC Regulation No.
DevelopmentNote |
Supersedes VDI 3475-1 & VDI 3475-2. (10/2015)
|
DocumentType |
Standard
|
Pages |
90
|
PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
Status |
Current
|
Supersedes |
VDI 3459 Blatt 4:2016-09 (Draft) | Terminology of waste treatment and energy management - Biological treatment |
VDI 3896:2015-10 | Emission control - Preparation of biogas to natural gas quality |
VDI 4250 Blatt 3:2016-08 | Bioaerosols and biological agents - Installation-specific measurement parameters and assessment values relevant to environmental health |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
VDI 3896:2015-10 | Emission control - Preparation of biogas to natural gas quality |
DIN EN 15267-3:2008-03 | Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources; German version EN 15267-3:2007 |
VDI 2262 Blatt 4:2006-03 | Workplace air - Reduction of exposure to air pollutants - Capture of air pollutants |
VDI 4252 Blatt 2:2004-06 | Measurement of airborne microorganisms and viruses in ambient air - Active sampling of bioaerosols - Separation of airborne mould on gelatine/polycarbonate filters |
VDI 4256 Blatt 1:2010-10 | Bioaerosols and biological agents - Determination of performance characteristics - Culture-based counting methods |
ISO 23210:2009 | Stationary source emissions Determination of PM10/PM2,5 mass concentration in flue gas Measurement at low concentrations by use of impactors |
DIN EN 14791:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF SULPHUR OXIDES - STANDARD REFERENCE METHOD |
DIN EN ISO 25139:2011-08 | Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011) |
EN 14791:2017 | Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method |
ISO 4225:1994 | Air quality General aspects Vocabulary |
VDI 3862 Blatt 5:2008-06 | Gaseous emission measurement - Measurement of lower aldehydes especially acrolein with the 2-HMP-method - GC-method |
VDI 3880:2011-10 | Olfactometry - Static sampling |
ISO 14956:2002 | Air quality Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty |
DIN EN 14790:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE WATER VAPOUR IN DUCTS - STANDARD REFERENCE METHOD |
DIN EN 1911:2010-12 | Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method |
VDI 4257 Blatt 1:2013-05 | Bioaerosols and biological agents - Emission measurement - Planning and performing emission measurements |
EN 15267-2:2009 | Air quality - Certification of automated measuring systems - Part 2: Initial assessment of the AMS manufacturer’s quality management system and post certification surveillance for the manufacturing process |
DIN EN 15267-2:2009-07 | Air quality - Certification of automated measuring systems - Part 2: Initial assessment of the AMS manufacturer?s quality management system and post certification surveillance for the manufacturing process |
EN 14789:2017 | Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism |
EN 13725:2003/AC:2006 | AIR QUALITY - DETERMINATION OF ODOUR CONCENTRATION BY DYNAMIC OLFACTOMETRY |
VDI 2466 Blatt 2:2008-10 | Gaseous emission measurement - Measurement of methane - Automatic method - Flame ionisation detector (FID) |
EN 15259:2007 | Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report |
VDI 4251-1 : 2007 COR 2 2016 | MEASUREMENT OF AIRBORNE MICROORGANISMS AND VIRUSES IN AMBIENT AIR - PLANNING OF PLANT-RELATED AMBIENT AIR MEASUREMENTS - PLUME MEASUREMENT |
ISO 25139:2011 | Stationary source emissions — Manual method for the determination of the methane concentration using gas chromatography |
VDI 2448 Blatt 2:1997-07 | Statistical evaluation of random-sample measurements of stationary source emissions: Determination of the upper confidence limit |
EN 13284-1:2017 | Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method |
EN 13284-2:2017 | Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems |
VDI 3884 Blatt 1:2015-02 | Olfactometry - Determination of odour concentration by dynamic olfactometry - Supplementary instructions for application of DIN EN 13725 |
EN 14181:2014 | Stationary source emissions - Quality assurance of automated measuring systems |
VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
VDI 3481 Blatt 4:2007-02 | Gaseous emission measurement - Measurement of the concentrations of total organic carbon and methane carbon using the flame ionisation detector (FID) |
EN ISO 25139:2011 | Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011) |
DIN EN ISO 23210:2009-12 | Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009) |
VDI 3475 Blatt 4:2010-08 | Emission control - Agricultural biogas facilities - Digestion of energy crops and manure |
EN 15058:2017 | Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry |
DIN EN 14626:2012-12 | Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy |
EN 12619:2013 | Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method |
DIN EN 13284-1:2015-12 (Draft) | STATIONARY SOURCE EMISSIONS - DETERMINATION OF LOW RANGE MASS CONCENTRATION OF DUST - PART 1: MANUAL GRAVIMETRIC METHOD |
VDI 3802:1998-12 | Air conditioning systems for factories |
EN 1911:2010 | Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method |
EN ISO 14956 : 2002 | AIR QUALITY - EVALUATION OF THE SUITABILITY OF A MEASUREMENT PROCEDURE BY COMPARISON WITH A REQUIRED MEASUREMENT UNCERTAINTY |
DIN ISO 4225:1996-08 | AIR QUALITY - GENERAL ASPECTS - VOCABULARY |
DIN EN 12619:2013-04 | Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method |
VDI 4219:2009-08 | Determination of the uncertainty of emission measurements by use of discontinuous measurement methods |
VDI 3951:2013-09 | Overview on relevant regulations on the performance of emission measurements |
VDI 3862 Blatt 1:1990-12 | Gaseous emission measurement; measurement of aliphatic aldehydes (C to C) MBTH method |
VDI 4250 Blatt 1:2014-08 | Bioaerosols and biological agents - Risk assessment of source-related ambient air measurements in the scope of environmental health - Effects of bioaerosol pollution on human health |
DIN EN 15267-1:2009-07 | Air quality - Certification of automated measuring systems - Part 1: General principles |
EN 14790:2017 | Stationary source emissions - Determination of the water vapour in ducts - Standard reference method |
VDI 3862 Blatt 4:2001-05 | Gaseous emission measurement - Mesurement of formaldehyde by the AHMT method |
VDI 3475 Blatt 2:2005-12 | Emission control - Facilities for biological waste - Composting an anaerobic (co-)digestion - Plant capacities up to approx. 6000 Mg/a |
DIN EN 14789:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM |
DIN EN 14181:2015-02 | Stationary source emissions - Quality assurance of automated measuring systems |
DIN EN 15058:2006-09 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF CARBON MONOXIDE - STANDARD REFERENCE METHOD: NON-DISPERSIVE INFRARED SPECTROMETRY |
VDI 3477:2016-03 | Biological waste gas purification - Biofilters |
ATV M 365 : 1999 | HYGIENE BEI DER BIOLOGISCHEN ABFALLBEHANDLUNG - HINWEISE ZU BAULICHEN UND ORGANISATORISCHEN MASSNAHMEN SOWIE ZUM ARBEITSSCHUTZ |
DIN EN 13725:2003-07 | Air quality - Determination of odour concentration by dynamic olfactometry |
VDI 2066 Blatt 1:1975-10 | Particulate matter measurement; measuring of particulate matter in flowing gases; gravimetric determination of dust load; fundamentals |
EN ISO 23210:2009 | Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009) |
VDI 3478 Blatt 2:2008-04 | Biological waste gas purification - Biological trickle bed-reactors |
VDI 4257 Blatt 2:2011-09 | Bioaerosols and biological agents - Emission measurement - Sampling of bioaerosols and separation in liquids |
DIN EN 14792:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF NITROGEN OXIDES - STANDARD REFERENCE METHOD: CHEMILUMINESCENCE |
EN 14792:2017 | Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence |
VDI 3478 Blatt 1:2011-03 | Biological waste gas purification - Bioscrubbers |
VDI 4255-1 : 2005 COR 2016 | BIOAEROSOLS AND BIOLOGICAL AGENTS - SOURCES OF EMISSIONS AND CONTROL MEASURES - OVERVIEW |
DIN EN 15259:2008-01 | Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report |
EN 14626:2012 | Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy |
DWA-M 380 : 2009 | CO-VERGAERUNG IN KOMMUNALEN KLAERSCHLAMMFAULBEHAELTERN, ABFALLVERGAERUNGSANLAGEN UND LANDWIRTSCHAFTLICHEN BIOGASANLAGEN |
EN 15267-1:2009 | Air quality - Certification of automated measuring systems - Part 1: General principles |
DIN EN 13284-2:2016-04 (Draft) | STATIONARY SOURCE EMISSIONS - DETERMINATION OF LOW RANGE MASS CONCENTRATION OF DUST - PART 2: QUALITY ASSURANCE OF AUTOMATED MEASURING SYSTEMS |
VDI 3475-3 : 2006 COR 2007 | Emission control - Mechnical-biological treatment facilities for municipal solid waste - Corrigendum concerning guideline VDI 3475 Part 3:2006-12 |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.