EN 20140-9 : 1993
|
ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 9: LABORATORY MEASUREMENTS OF ROOM-TO-ROOM AIRBORNE SOUND INSULATION OF A SUSPENDED CEILING WITH A PLENUM SUSPENDED ABOVE IT |
DIN EN ISO 14257:2011-11
|
Acoustics - Measurement and parametric description of of spatial sound distribution curves in workrooms for evaluation of their acoustical performance (ISO 14257:2001) |
DIN 18041:2016-03
|
ACOUSTIC QUALITY IN ROOMS - SPECIFICATIONS AND INSTRUCTIONS FOR THE ROOM ACOUSTIC DESIGN |
DIN EN ISO 717-1:2013-06
|
Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 717-1:2013) |
DIN 52217:1984-08
|
TEST IN BUILDING ACOUSTICS; FLANKING TRANSMISSION; TERMS AND DEFINITIONS |
DIN EN ISO 140-12:2000-03
|
ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 12: LABORATORY MEASUREMENT OF ROOM-TO-ROOM AIRBORNE AND IMPACT SOUND INSULATION OF AN ACCESS FLOOR |
DIN 18168-1:2007-04
|
CEILING LININGS AND SUSPENDED CEILINGS WITH GYPSUM PLASTERBOARDS - PART 1: REQUIREMENTS FOR CONSTRUCTION |
DIN 45641:1990-06
|
AVERAGING OF SOUND LEVELS |
ISO 10848-2:2017
|
Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 2: Application to Type B elements when the junction has a small influence |
ISO 10848-1:2017
|
Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 1: Frame document |
DIN EN ISO 10848-1:2016-10 (Draft)
|
ACOUSTICS - LABORATORY AND FIELD MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING ROOMS - PART 1: FRAME DOCUMENT (ISO 10848-1:2017) |
EN ISO 10140-5:2010/A1:2014
|
ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT (ISO 10140-5:2010) |
ISO 10140-2:2010
|
Acoustics Laboratory measurement of sound insulation of building elements Part 2: Measurement of airborne sound insulation |
DIN 4109-2:2016-07
|
SOUND INSULATION IN BUILDINGS - PART 2: VERIFICATION OF COMPLIANCE WITH THE REQUIREMENTS BY CALCULATION |
DIN EN ISO 10140-1:2015-01 (Draft)
|
ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS (ISO 10140-1:2016) |
ISO 717-2:2013
|
Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation |
ISO 16283-1:2014
|
Acoustics Field measurement of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
EN ISO 14257 : 2001
|
ACOUSTICS - MEASUREMENT AND PARAMETRIC DESCRIPTION OF SPATIAL SOUND DISTRIBUTION CURVES IN WORKROOMS FOR EVALUATION OF THEIR ACOUSTICAL PERFORMANCE |
ISO 10140-1:2016
|
Acoustics Laboratory measurement of sound insulation of building elements Part 1: Application rules for specific products |
DIN EN 13964:2014-08
|
SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
EN ISO 717-2:2013
|
Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013) |
ISO 14257:2001
|
Acoustics — Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance |
EN ISO 10140-1:2016
|
ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS (ISO 10140-1:2016) |
DIN 4109-3:1984-10 (Draft)
|
NOISE-CONTROL IN BUILDINGS; EXAMPLES OF CONSTRUCTION |
DIN EN ISO 10534-2:2001-10
|
Acoustics - Determination of sound absorption coefficient and impedance in impedance tubes - Part 2: Transfer-function method (ISO 10534-2:1998); English version of DIN EN ISO 10534-2 |
DIN EN 16487:2015-02
|
ACOUSTICS - TEST CODE FOR SUSPENDED CEILINGS - SOUND ABSORPTION |
DIN EN ISO 3382-3:2012-05
|
Acoustics - Measurement of room acoustic parameters - Part 3: Open plan offices (ISO 3382-3:2012) |
DIN EN ISO 10534-1:2001-10
|
ACOUSTICS - DETERMINATION OF SOUND ABSORPTION COEFFICIENT AND IMPEDANCE IN IMPEDANCES TUBES - PART 1: METHOD USING STANDING WAVE RATIO |
ISO 11654:1997
|
Acoustics — Sound absorbers for use in buildings — Rating of sound absorption |
DIN EN ISO 10848-2:2016-10 (Draft)
|
ACOUSTICS - LABORATORY AND FIELD MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING ROOMS - PART 2: APPLICATION TO TYPE B ELEMENTS WHEN THE JUNCTION HAS A SMALL INFLUENCE (ISO 10848-2:2017) |
ISO 3382-3:2012
|
Acoustics Measurement of room acoustic parameters Part 3: Open plan offices |
VDI 1000:2017-02
|
VDI Standardisation Work - Principles and procedures |
EN ISO 10140-3:2010/A1:2015
|
ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 3: MEASUREMENT OF IMPACT SOUND INSULATION (ISO 10140-3:2010/AMD 1:2015) |
EN ISO 354:2003
|
Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
EN ISO 10848-1:2017
|
Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 1: Frame document (ISO 10848-1:2017) |
ISO 140-12:2000
|
Acoustics Measurement of sound insulation in buildings and of building elements Part 12: Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor |
DIN 18168-2:2008-05
|
CEILING LININGS AND SUSPENDED CEILINGS WITH GYPSUM PLASTERBOARDS - PART 2: VERIFICATION OF THE LOAD-CARRYING CAPACITY OF METAL SUB-CONSTRUCTIONS AND METAL SUSPENDING RODS |
ISO 140-4:1998
|
Acoustics Measurement of sound insulation in buildings and of building elements Part 4: Field measurements of airborne sound insulation between rooms |
DIN EN ISO 717-2:2013-06
|
Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013) |
DIN 52210-6:2013-07
|
TESTING OF ACOUSTICS IN BUILDINGS - AIRBORNE AND IMPACT SOUND INSULATION - DETERMINATION OF THE LEVEL DIFFERENCE BY SHAFTS |
DIN EN ISO 11654:1997-07
|
ACOUSTICS - SOUND ABSORBERS FOR USE IN BUILDINGS - RATING OF SOUND ABSORPTION |
VDI 3726:1991-01
|
Noise reduction in restaurants and skittle-alleys |
EN ISO 10140-2:2010
|
Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010) |
DIN 1320:2009-12
|
ACOUSTICS - TERMINOLOGY |
ISO 10534-2:1998
|
Acoustics — Determination of sound absorption coefficient and impedance in impedance tubes — Part 2: Transfer-function method |
DIN 4109-1:2016-07
|
SOUND INSULATION IN BUILDINGS - PART 1: MINIMUM REQUIREMENTS |
ISO 717-1:2013
|
Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
DIN 4109-11:2010-05
|
SOUND INSULATION IN BUILDINGS - PART 11: VERIFICATION OF SOUND INSULATION - QUALITY AND SUITABILITY TESTING |
ISO 10140-3:2010
|
Acoustics Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation |
ISO 10140-5:2010
|
Acoustics Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipment |
EN ISO 3382-3:2012
|
Acoustics - Measurement of room acoustic parameters - Part 3: Open plan offices (ISO 3382-3:2012) |
EN ISO 11654:1997
|
Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997) |
EN ISO 12999-1:2014
|
Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2014) |
ISO 10534-1:1996
|
Acoustics Determination of sound absorption coefficient and impedance in impedance tubes Part 1: Method using standing wave ratio |
EN ISO 10534-2:2001
|
Acoustics - Determination of sound absorption coefficient and impedance in impedances tubes - Part 2: Transfer-function method (ISO 10534-2:1998) |
VDI 2569:1990-01
|
Sound protection and acoustical design in offices |
ISO 12999-1:2014
|
Acoustics Determination and application of measurement uncertainties in building acoustics Part 1: Sound insulation |
EN ISO 10848-2:2017
|
Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 2: Application to Type B elements when the junction has a small influence (ISO 10848-2:2017) |
DIN 18181:2008-10
|
GYPSUM PLASTERBOARDS FOR BUILDING CONSTRUCTION - APPLICATION |
DIN EN ISO 16283-1:2014-06
|
ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1: AIRBORNE SOUND INSULATION (ISO 16283-1:2014 + AMD 1:2017) |
EN ISO 10534-1:2001
|
Acoustics - Determination of sound absorption coefficient and impedance in impedances tubes - Part 1: Method using standing wave ratio (ISO 10534-1:1996) |