ISO 812:2017
|
Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness |
ISO 1432:2013
|
Rubber, vulcanized or thermoplastic Determination of low-temperature stiffening (Gehman test) |
ISO 2921:2011
|
Rubber, vulcanized Determination of low-temperature retraction (TR test) |
ISO 813:2016
|
Rubber, vulcanized or thermoplastic Determination of adhesion to a rigid substrate 90 degree peel method |
ISO 4662:2017
|
Rubber, vulcanized or thermoplastic Determination of rebound resilience |
ISO 11345:2006
|
Rubber — Assessment of carbon black and carbon black/silica dispersion — Rapid comparative methods |
ISO 23529:2016
|
Rubber General procedures for preparing and conditioning test pieces for physical test methods |
ISO 4649:2017
|
Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device |
ISO 188:2011
|
Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
ISO 8013:2012
|
Rubber, vulcanized Determination of creep in compression or shear |
ISO 1827:2016
|
Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods |
ISO 2230:2002
|
Rubber products — Guidelines for storage |
ISO 34-1:2015
|
Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces |
ISO 4666-3:2016
|
Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (constant-strain type) |
ISO 6502:2016
|
Rubber Guide to the use of curemeters |
ISO 3865:2005
|
Rubber, vulcanized or thermoplastic Methods of test for staining in contact with organic material |
ISO 2285:2013
|
Rubber, vulcanized or thermoplastic Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load |
ISO 6179:2017
|
Rubber, vulcanized or thermoplastic Rubber sheets and rubber-coated fabrics Determination of transmission rate of volatile liquids (gravimetric technique) |
ISO 1431-1:2012
|
Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing |
ISO 15113:2005
|
Rubber — Determination of frictional properties |
IEC 60093:1980
|
Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
ISO 3384:2005
|
Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression at ambient and at elevated temperatures |
ISO 2782:2006
|
Rubber, vulcanized or thermoplastic Determination of permeability to gases |
ISO 2007:2007
|
Rubber, unvulcanized Determination of plasticity Rapid-plastimeter method |
ISO 289:1985
|
Rubber, unvulcanized Determination of Mooney viscosity |
ISO 2393:2014
|
Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures |
ISO 7743:2017
|
Rubber, vulcanized or thermoplastic Determination of compression stress-strain properties |
ISO 3387:2012
|
Rubber Determination of crystallization effects by hardness measurements |
ISO 37:2017
|
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
ISO 9026:2007
|
Raw rubber or unvulcanized compounds Determination of green strength |
ISO 36:2017
|
Rubber, vulcanized or thermoplastic Determination of adhesion to textile fabrics |
ISO 1853:2011
|
Conducting and dissipative rubbers, vulcanized or thermoplastic Measurement of resistivity |
ISO 48:2010
|
Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
ISO 1817:2015
|
Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
ISO 2781:2008
|
Rubber, vulcanized or thermoplastic Determination of density |