09/30205350 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 60695-7-2 ED.1 - FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS
Hardcopy , PDF
30-11-2011
English
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Role of small-scale toxicity tests
4.1 General
4.2 Toxic potency
4.3 Fractional Effective Dose (FED) and toxic hazard
4.4 Normal toxic potencies
5 General aspects of small-scale toxicity tests
5.1 General
5.2 Physical fire models
5.3 Fire stages in a compartment fire
5.4 Methods of analysis
5.4.1 Chemical analysis based methods
5.4.2 Methods based on animal exposure
6 Summary of published chemical analysis based test methods
6.1 UK Ministry of Defence - Defence Standard (DS)
6.1.1 Summary
6.1.2 Purpose and principle
6.1.3 Test specimen
6.1.4 Test method
6.1.5 Repeatability and reproducibility
6.1.6 Relevance of test data and special observations
6.1.7 Reference document
6.2 Airbus industry
6.2.1 Summary
6.2.2 Purpose and principle
6.2.3 Test specimen
6.2.4 Test method
6.2.5 Repeatability and reproducibility
6.2.6 Relevance of test data and special observations
6.2.7 Reference documents
6.3 Comitato Elettrotecnico Italiano (CEI)
6.3.1 Summary
6.3.2 Purpose and principle
6.3.3 Test specimen
6.3.4 Test method
6.3.5 Repeatability and reproducibility
6.3.6 Relevance of test data and special observations
6.3.7 Reference documents
6.4 Norme Française (NF)
6.4.1 Summary
6.4.2 Purpose and principle
6.4.3 Test specimen
6.4.4 Test method
6.4.5 Repeatability and reproducibility
6.4.6 Relevance of test data and special observations
6.4.7 Reference documents
6.5 International Electrotechnical Commission (IEC)
6.5.1 Summary
6.5.2 Purpose and principle
6.5.3 Test specimen
6.5.4 Test method
6.5.5 Sampling of effluent
6.5.6 Repeatability and reproducibility
6.5.7 Relevance of test data and special observations
6.5.8 Reference documents
6.6 International Standards Organization (ISO)
6.6.1 Summary
6.6.2 Purpose and principle
6.6.3 Test specimen
6.6.4 Test method
6.6.5 Repeatability and reproducibility
6.6.6 Relevance of test data and special observations
6.6.7 Reference documents
6.7 International Maritime Organization (IMO)
6.7.1 Summary
6.7.2 Purpose and principle
6.7.3 Test specimen
6.7.4 Test method
6.7.5 Repeatability and reproducibility
6.7.6 Relevance of test data and special observations
6.7.7 Reference documents
7 Summary of published test methods relating to animal exposure
7.1 Deutsches Institut für Normung (DIN)
7.1.1 Summary
7.1.2 Purpose and principle
7.1.3 Test specimen
7.1.4 Test method
7.1.5 Repeatability and reproducibility
7.1.6 Relevance of test data and special observations
7.1.7 Reference documents
7.2 National Bureau of Standards (NBS)
7.2.1 Summary
7.2.2 Purpose and principle
7.2.3 Test specimen
7.2.4 Test method
7.2.5 Repeatability and reproducibility
7.2.6 Relevance of test data and special observations
7.2.7 Reference documents
7.3 National Institute of Standards and Technology (NIST)
7.3.1 Summary
7.3.2 Purpose and principle
7.3.3 Test specimen
7.3.4 Test method
7.3.5 Repeatability and reproducibility
7.3.6 Relevance of test data and special observations
7.3.7 Reference documents
7.4 University of Pittsburgh (Upitt)
7.4.1 Summary
7.4.2 Purpose and principle
7.4.3 Test specimen
7.4.4 Test method
7.4.5 Repeatability and reproducibility
7.4.6 Relevance of test data and special observations
7.4.7 Reference documents
7.5 Japanese Ministry of Construction (JMC)
7.5.1 Summary
7.5.2 Purpose and principle
7.5.3 Test specimen
7.5.4 Test method
7.5.5 Repeatability and reproducibility
7.5.6 Relevance of test data and special observations
7.5.7 Reference documents
Annex A (informative) Overview of toxicity test methods
Bibliography
BS EN 60695-7-2 ED.1
| Committee |
GEL/89
|
| DocumentType |
Draft
|
| Pages |
46
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| DIN 53436-1:2015-12 | GENERATION OF THERMAL DECOMPOSITION PRODUCTS FROM MATERIALS FOR THEIR ANALYTIC-TOXICOLOGICAL TESTING - PART 1: DECOMPOSITION APPARATUS AND DETERMINATION OF TEST TEMPERATURE |
| DIN 53436-2:2015-12 | GENERATION OF THERMAL DECOMPOSITION PRODUCTS FROM MATERIALS FOR THEIR ANALYTIC-TOXICOLOGICAL TESTING - PART 2: THERMAL DECOMPOSITION METHOD |
| ISO 13344:2015 | Estimation of the lethal toxic potency of fire effluents |
| ISO/TR 9122-5:1993 | Toxicity testing of fire effluents Part 5: Prediction of toxic effects of fire effluents |
| NFC 20 454 : 1984 | BASIC ENVIRONMENTAL TESTING PROCEDURES; TEST METHODS; FIRE BEHAVIOUR, ANALYSIS & TITRATIONS OF GASES EVOLVED DURING PYROLYSIS OR COMBUSTION OF MATERIALS USED IN ELECTROTECHNICS ABNORMAL HEAT OR FIRE, TUBE FURNACE METHOD |
| ASTM E 1678 : 2015 : REDLINE | Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis |
| ISO 16312-1:2016 | Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 1: Criteria |
| ISO 5659-2:2017 | Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test |
| CEN/TS 45545-2:2009 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
| ISO 13943:2017 | Fire safety — Vocabulary |
| CEI 20-37/7 : 2ED 1997 | PROVE SUI GAS EMESSI DURANTE LA COMBUSTIONE DI CAVI ELETTRICI E DEI MATERIALI DEI CAVI - PARTE 7: DETERMINAZIONE DELL'INDICE DI TOSSICIT DEI GAS EMESSI DAI CAVI |
| BS 476-6(1989) : 1989 | FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 6: METHOD OF TEST FOR FIRE PROPAGATION FOR PRODUCTS |
| NES 713 : ISSUE 3 | DETERMINATION OF THE TOXICITY INDEX OF THE PRODUCTS OF COMBUSTION FROM SMALL SPECIMENS OF MATERIALS |
| NFX 70 100-2 : 2006 | FIRE TESTS - ANALYSIS OF GASEOUS EFFLUENTS - PART 2: TUBULAR FURNACE THERMAL DEGRADATION METHOD |
| ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
| ISO 19702:2015 | Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy |
| NFX 70 100-1 : 2006 | FIRE TESTS - ANALYSIS OF GASEOUS EFFLUENTS - PART 1: METHODS FOR ANALYSING GASES STEMMING FROM THERMAL DEGRADATION |
| IEC 60754-2:2011 | Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity |
| IEC GUIDE 104:2010 | The preparation of safety publications and the use of basic safety publications and group safety publications |
| ASTM E 662 : 2017-02 | TEST METHOD FOR SPECIFIC OPTICAL DENSITY OF SMOKE GENERATED BY SOLID MATERIALS |
| ISO 13571:2012 | Life-threatening components of fire — Guidelines for the estimation of time to compromised tenability in fires |
| ISO/TS 19700:2016 | Controlled equivalence ratio method for the determination of hazardous components of fire effluents — Steady-state tube furnace |
| IEC 60695-7-1:2010 | Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance |
| NFPA 269 : 2017 | TEST METHOD FOR DEVELOPING TOXIC POTENCY DATA FOR USE IN FIRE HAZARD MODELING |
| ISO 19706:2011 | Guidelines for assessing the fire threat to people |
| ISO 19703:2010 | Generation and analysis of toxic gases in fire Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires |
| IEC TS 60695-7-3:2004 | Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results |
| ISO/TR 16312-2:2007 | Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 2: Evaluation of individual physical fire models |
| DIN 53436-3:1989-11 | GENERATION OF THERMAL DECOMPOSITION PRODUCTS FROM MATERIALS IN AN AIR STREAM TOXICOLOGICAL TESTING; METHOD FOR TESTING THE INHALATION TOXICITY |
| AFAP-3 : 2010 | NATO REACTION-TO-FIRE TESTS FOR MATERIALS - TOXICITY OF FIRE EFFLUENTS |
| ISO 19701:2013 | Methods for sampling and analysis of fire effluents |
| BS 7990:2003 | Tube furnace method for the determination of toxic product yields in fire effluents |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.