Skip to content
Please enter a keyword to search

  • ISO 19706:2011

    Current The latest, up-to-date edition.

    Guidelines for assessing the fire threat to people

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French

    Published date:  25-08-2011

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 19706:2011 is intended to serve as general guidelines for the assessment of the fire threat to people. ISO 19706:2011 encompasses the development, evaluation and use of relevant quantitative information for use in fire hazard and risk assessment. This information, generally obtained from fire-incidence investigation, fire statistics, real-scale fire tests and from physical fire models, is intended for use in conjunction with computational models for analysis of the initiation and development of fire, fire spread, smoke formation and movement, chemical species generation, transport and decay, and people movement, as well as fire detection and suppression [ISO/TR 13387 (all parts)]. Aspects of the methodology described in this ISO 19706:2011 are further amplified in ISO 13571 and ISO 13344.

    ISO 19706:2011 is intended to facilitate addressing the consequences of a single, acute human exposure to fire effluent. ISO 19706:2011 does not address other effects of the heat, gases and aerosols, such as effects on electronic equipment and effects of frequent, multiple environmental exposures of people, which are of importance in fire safety design.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 92/SC 3
    Development Note Supersedes ISO TS 19706. (01/2007) Supersedes ISO/DIS 19706. (08/2011)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    16/30342722 DC : 0 BS ISO 19703 - GENERATION AND ANALYSIS OF TOXIC GASES IN FIRE - CALCULATION OF SPECIES YIELDS, EQUIVALENCE RATIOS AND COMBUSTION EFFICIENCY IN EXPERIMENTAL FIRES
    09/30206172 DC : 0 BS EN 60695-7-3 ED.1 - FIRE HAZARD TESTING - PART 7-3: TOXICITY OF FIRE EFFLUENT - USE AND INTERPRETATION OF TEST RESULTS
    BS EN 60695-1-10:2017 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. General guidelines
    15/30318694 DC : 0 BS ISO 12828-2 - VALIDATION METHODS FOR FIRE GAS ANALYSES - PART 2: VALIDATION OF QUANTIFICATION METHOD
    NF EN 60695-7-1 : 2011 FIRE HAZARD TESTING - PART 7-1: TOXICITY OF FIRE EFFLUENT - GENERAL GUIDANCE
    13/30275218 DC : 0 BS ISO 19700 - CONTROLLED EQUIVALENCE RATIO METHOD FOR THE DETERMINATION OF HAZARDOUS COMPONENTS OF FIRE EFFLUENTS - THE STEADY STATE TUBE FURNACE
    PD ISO/TS 29761:2015 Fire safety engineering. Selection of design occupant behavioural scenarios
    ISO 13344:2015 Estimation of the lethal toxic potency of fire effluents
    PD ISO/IEC/TR 15026-1:2010 Systems and software engineering. Systems and software assurance Concepts and vocabulary
    UNI EN ISO 25762 : 2012 PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES
    ISO 12828-2:2016 Validation method for fire gas analysis Part 2: Intralaboratory validation of quantification methods
    BS EN ISO 5659-2:2017 Plastics. Smoke generation Determination of optical density by a single-chamber test
    IEC 60695-7-1:2010 Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance
    EN 60695-1-10:2017 Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
    EN 60695-7-2:2011 Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods
    EN 60695-7-3 : 2011 FIRE HAZARD TESTING - PART 7-3: TOXICITY OF FIRE EFFLUENT - USE AND INTERPRETATION OF TEST RESULTS (IEC 60695-7-3:2011)
    IEC 60695-1-10:2016 RLV Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
    OVE/ONORM EN 60695-7-2 : 2013 FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS (IEC 60695-7-2:2011)
    BS EN 60695-7-1:2010 Fire hazard testing Toxicity of fire effluent. General guidance
    DIN EN ISO 25762:2012-04 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)
    09/30183765 DC : 0 BS EN 60695-6-1 A1 ED.2 - FIRE HAZARD TESTING - PART 6-1: SOME OBSCURATION - GENERAL GUIDANCE
    09/30205350 DC : 0 BS EN 60695-7-2 ED.1 - FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS
    BS EN 60695-6-1 : 2005 FIRE HAZARD TESTING - PART 6-1: SMOKE OBSCURATION - GENERAL GUIDANCE
    ISO 19703:2010 Generation and analysis of toxic gases in fire Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires
    CEI EN 60695-7-1 : 2013 FIRE HAZARD TESTING - PART 7-1: TOXICITY OF FIRE EFFLUENT - GENERAL GUIDANCE
    I.S. EN 60695-7-3:2011 FIRE HAZARD TESTING - PART 7-3: TOXICITY OF FIRE EFFLUENT - USE AND INTERPRETATION OF TEST RESULTS (IEC 60695-7-3:2011)
    I.S. EN 60695-7-2:2011 FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS (IEC 60695-7-2:2011)
    CSA ISO/IEC TR 15026-1 : 2013 SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE ASSURANCE - PART 1: CONCEPTS AND VOCABULARY
    ISO/IEC TR 15026-1:2010 Systems and software engineering Systems and software assurance Part 1: Concepts and vocabulary
    CSA ISO/IEC 15026-1 : 2015 SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE ASSURANCE - PART 1: CONCEPTS AND VOCABULARY
    EN 60695-6-1:2005/A1:2010 FIRE HAZARD TESTING - PART 6-1: SMOKE OBSCURATION - GENERAL GUIDANCE
    DIN EN ISO 5659-2:2016-02 (Draft) PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST (ISO 5659-2:2017)
    CEI EN 60695-6-2 : 2013 FIRE HAZARD TESTING - PART 6-2: SMOKE OBSCURATION - SUMMARY AND RELEVANCE OF TEST METHODS
    PD IEC/TR 62222:2012 Fire performance of communication cables installed in buildings
    IEC 60695-7-2:2011 Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods
    I.S. EN ISO 5659-2:2017 PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST (ISO 5659-2:2017)
    CEI EN 60695-7-2 : 2013 FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS
    BS ISO 25762 : 2009 PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES
    18/30369843 DC : DRAFT APR 2018 BS ISO 11907-1 - PLASTICS - SMOKE GENERATION - DETERMINATION OF THE CORROSIVITY OF FIRE EFFLUENTS - PART 1: GENERAL REQUIREMENTS AND APPLICABILITY
    13/30268559 DC : 0 BS ISO/IEC 15026-1 - SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE ASSURANCE - PART 1: CONCEPTS AND VOCABULARY
    BS EN 60695-7-3:2011 Fire hazard testing Toxicity of fire effluent. Use and interpretation of test results
    IEEE 15026-3-2013 IEEE Standard Adoption of ISO/IEC 15026-3 -- Systems and Software Engineering -- Systems and Software Assurance -- Part 3: System Integrity Levels
    BS ISO 12828-1:2011 Validation method for fire gas analysis Limits of detection and quantification
    UNE-EN 60695-7-1:2011 Fire hazard testing -- Part 7-1: Toxicity of fire effluent - General guidance
    ISO/TS 29761:2015 Fire safety engineering — Selection of design occupant behavioural scenarios
    ISO/TR 16312-2:2007 Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 2: Evaluation of individual physical fire models
    I.S. EN 60695-6-2:2011 FIRE HAZARD TESTING - PART 6-2: SMOKE OBSCURATION - SUMMARY AND RELEVANCE OF TEST METHODS (IEC 60695-6-2:2011)
    IEC 60695-6-2:2011 Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods
    BS EN ISO 25762:2012 Plastics. Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
    10/30230297 DC : 0 BS ISO/IEC 15026-3 - SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE ASSURANCE - PART 3: SYSTEM INTEGRITY LEVELS
    BS ISO/IEC 15026-1:2013 Systems and software engineering. Systems and software assurance Concepts and vocabulary
    BS ISO 13344:2015 Estimation of the lethal toxic potency of fire effluents
    16/30323587 DC : DRAFT JAN 2016 BS EN ISO 5659-2 - PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST
    PD ISO/TS 19700:2016 Controlled equivalence ratio method for the determination of hazardous components of fire effluents. Steady-state tube furnace
    04/30097971 DC : DRAFT FEB 2004 ISO/DIS 13344 - DETERMINATION OF THE LETHAL TOXIC POTENCY OF FIRE EFFLUENTS
    PD ISO/TS 13447:2013 Fire safety engineering. Guidance for use of fire zone models
    ISO 12828-1:2011 Validation method for fire gas analysis — Part 1: Limits of detection and quantification
    BS EN 60695-7-2:2011 Fire hazard testing Toxicity of fire effluent. Summary and relevance of test methods
    BS ISO 29903:2012 Guidance for comparison of toxic gas data between different physical fire models and scales
    I.S. EN 60695-6-1:2005 FIRE HAZARD TESTING - PART 6-1: SMOKE OBSCURATION - GENERAL GUIDANCE
    IEC 60695-1-10 REDLINE : 2ED 2016 FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES
    I.S. EN ISO 25762:2012 PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES (ISO 25762:2009)
    UNE-EN 60695-6-2:2012 Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods
    ISO 16312-1:2016 Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 1: Criteria
    I.S. EN 60695-1-10:2017 FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES
    ISO 19702:2015 Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy
    ISO/TS 13447:2013 Fire safety engineering — Guidance for use of fire zone models
    UNE-EN 60695-7-3:2012 Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results
    CEI EN 60695-7-3 : 2013 FIRE HAZARD TESTING - PART 7-3: TOXICITY OF FIRE EFFLUENT - USE AND INTERPRETATION OF TEST RESULTS
    ISO/TR 13571-2:2016 Life-threatening components of fire Part 2: Methodology and examples of tenability assessment
    ISO 29903:2012 Guidance for comparison of toxic gas data between different physical fire models and scales
    I.S. EN 60695-7-1:2010 FIRE HAZARD TESTING - PART 7-1: TOXICITY OF FIRE EFFLUENTS - GENERAL GUIDANCE
    IEC TS 60695-7-3:2004 Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results
    IEC 60695-6-1:2005+AMD1:2010 CSV Fire hazard testing - Part 6-1: Smoke obscuration - General guidance
    UNE-EN ISO 5659-2:2018 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017)
    IEC TR 62222:2012 Fire performance of communication cables installed in buildings
    IEC 60695-1-10:2016 Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
    UNE-EN 60695-7-2:2012 Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods
    ISO 25762:2009 Plastics Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
    EN ISO 5659-2:2017 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017)
    EN ISO 25762:2012 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)
    UNE-EN 60695-1-10:2017 Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
    11/30228858 DC : DRAFT JUNE 2011 IEC 60695-6-30 TS ED 2.0 - FIRE HAZARD TESTING - PART 6-30: SMOKE OBSCURATION - SMALL SCALE STATIC METHOD - APPARATUS
    10/30198657 DC : 0 BS EN 60695-7-1 - FIRE HAZARD TESTING - PART 7-1: TOXICITY OF FIRE EFFLUENT - GENERAL GUIDANCE
    IEC TS 60695-6-30:2013 Fire hazard testing - Part 6-30: Smoke obscuration - Small-scale static method - Apparatus
    ISO/IEC 15026-1:2013 Systems and software engineering Systems and software assurance Part 1: Concepts and vocabulary
    ISO/TS 19700:2016 Controlled equivalence ratio method for the determination of hazardous components of fire effluents — Steady-state tube furnace
    IEEE/ISO/IEC 15026-1-2014 IEEE Standard Adoption of ISO/IEC 15026-1--Systems and Software Engineering--Systems and Software Assurance--Part 1: Concepts and Vocabulary
    ISO 13571:2012 Life-threatening components of fire Guidelines for the estimation of time to compromised tenability in fires
    ISO 15928-4:2017 Houses — Description of performance — Part 4: Fire safety
    BS EN 60695-6-2:2011 Fire hazard testing Smoke obscuration. Summary and relevance of test methods
    ISO 5659-2:2017 Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
    EN 60695-7-1:2010 Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance
    EN 60695-6-2 : 2011 FIRE HAZARD TESTING - PART 6-2: SMOKE OBSCURATION - SUMMARY AND RELEVANCE OF TEST METHODS (IEC 60695-6-2:2011)

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 13344:2015 Estimation of the lethal toxic potency of fire effluents
    ISO/TR 13387-1:1999 FIRE SAFETY ENGINEERING - PART 1: APPLICATION OF FIRE PERFORMANCE CONCEPTS TO DESIGN OBJECTIVES
    ASTM E 1678 : 2015 : REDLINE Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
    ISO 16312-1:2016 Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 1: Criteria
    ISO/TR 13387-3:1999 Fire safety engineering Part 3: Assessment and verification of mathematical fire models
    ISO 13943:2017 Fire safety — Vocabulary
    ISO/TR 13387-8:1999 FIRE SAFETY ENGINEERING - PART 8: LIFE SAFETY - OCCUPANT BEHAVIOUR, LOCATION AND CONDITION
    ISO/TR 13387-7:1999 Fire safety engineering Part 7: Detection, activation and suppression
    ISO 19702:2015 Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy
    ISO/TR 13387-4:1999 Fire safety engineering — Part 4: Initiation and development of fire and generation of fire effluents
    ISO 13571:2012 Life-threatening components of fire Guidelines for the estimation of time to compromised tenability in fires
    ISO/TR 13387-2:1999 Fire safety engineering Part 2: Design fire scenarios and design fires
    ISO/TR 13387-6:1999 Fire safety engineering Part 6: Structural response and fire spread beyond the enclosure of origin
    ISO 19703:2010 Generation and analysis of toxic gases in fire Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires
    ISO 19701:2013 Methods for sampling and analysis of fire effluents
    ISO/TR 13387-5:1999 Fire safety engineering Part 5: Movement of fire effluents
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective