ISO 75-1:2013
|
Plastics Determination of temperature of deflection under load Part 1: General test method |
ISO 2408:2017
|
Steel wire ropes — Requirements |
ISO 2578:1993
|
Plastics Determination of time-temperature limits after prolonged exposure to heat |
API 2SM : 2014
|
DESIGN, MANUFACTURE, INSTALLATION, AND MAINTENANCE OF SYNTHETIC FIBER ROPES FOR OFFSHORE MOORING |
ISO/TR 13637:1997
|
Petroleum and natural gas industries — Mooring of mobile offshore drilling units (MODUS) — Design and analysis |
ASTM D 671 : 1993
|
Standard Test Method for Flexural Fatigue of Plastics by Constant-Amplitude-of-Force (Withdrawn 2002) |
ISO 10425:2003
|
Steel wire ropes for the petroleum and natural gas industries — Minimum requirements and terms of acceptance |
API 2A WSD : 2014
|
PLANNING, DESIGNING, AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - WORKING STRESS DESIGN |
ASTM D 732 : 2017 : REDLINE
|
Standard Test Method for Shear Strength of Plastics by Punch Tool |
ASTM C 518 : 2017 : REDLINE
|
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
ISO 13628-1:2005
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations |
ISO 3506-1:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
ASTM B 348 : 2013 : REDLINE
|
Standard Specification for Titanium and Titanium Alloy Bars and Billets |
ASTM B 265 : 2015 : REDLINE
|
Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate |
ISO 13628-2:2006
|
Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications |
ISO 15610:2003
|
Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables |
BS 6235:1982
|
Code of practice for fixed offshore structures |
EN 10025:1990/A1:1993
|
HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
ASTM D 792 : 2013 : REDLINE
|
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
ISO 1827:2016
|
Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods |
AWS A1.1 : 2016
|
METRIC PRACTICE GUIDE FOR THE WELDING INDUSTRY |
ISO 34-1:2015
|
Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces |
ISO 13628-11:2007
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 11: Flexible pipe systems for subsea and marine applications |
ISO 75-2:2013
|
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
ISO 527-2:2012
|
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
ISO 15612:2004
|
Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure |
ISO 8302:1991
|
Thermal insulation — Determination of steady-state thermal resistance and related properties — Guarded hot plate apparatus |
ISO 8301:1991
|
Thermal insulation Determination of steady-state thermal resistance and related properties Heat flow meter apparatus |
ISO 1183:1987
|
Plastics Methods for determining the density and relative density of non-cellular plastics |
ISO 1431-1:2012
|
Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing |
API 2RD : 2013
|
DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
ISO 19902:2007
|
Petroleum and natural gas industries Fixed steel offshore structures |
ISO 15611:2003
|
Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience |
ISO 180:2000
|
Plastics Determination of Izod impact strength |
ASTM D 790 : 2017 : REDLINE
|
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
ISO 10474:2013
|
Steel and steel products — Inspection documents |
NORSOK U 001 : REV 4
|
SUBSEA PRODUCTION SYSTEMS |
ISO 604:2002
|
Plastics — Determination of compressive properties |
ISO 15589-2:2012
|
Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines |
AWS A5.16 : 90(R1997)
|
TITANIUM AND TITANIUM ALLOY WELDING ELECTRODES AND RODS, SPECIFICATION FOR |
ISO 179-1:2010
|
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
ISO 13628-4:2010
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment |
ISO 10423:2009
|
Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment |
ISO 62:2008
|
Plastics Determination of water absorption |
ASTM D 648 : 2016
|
Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position |
ISO 7743:2017
|
Rubber, vulcanized or thermoplastic Determination of compression stress-strain properties |
BS EN 10083-2:2006
|
Steels for quenching and tempering Technical delivery conditions for non alloy steels |
ISO 37:2017
|
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
ISO 15613:2004
|
Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
ASTM D 695 : 2015 : REDLINE
|
Standard Test Method for Compressive Properties of Rigid Plastics |
ISO 3108:2017
|
Steel wire ropes — Test method — Determination of measured breaking force |
ISO 15607:2003
|
Specification and qualification of welding procedures for metallic materials General rules |
ISO 14126:1999
|
Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction |
BS EN 10083-1:2006
|
Steels for quenching and tempering General technical delivery conditions |
ASTM D 570 : 1998 : R2018
|
Standard Test Method for Water Absorption of Plastics |
ISO 178:2010
|
Plastics Determination of flexural properties |
ISO 7784-2:2016
|
Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen |
ASTM D 638 : 2014 : REDLINE
|
Standard Test Method for Tensile Properties of Plastics |
ASTM D 746 : 2014 : REDLINE
|
Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles |
ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
ISO 868:2003
|
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
NORSOK M 501 : REV 6
|
SURFACE PREPARATION AND PROTECTIVE COATING |
ASTM D 1418 : 2017 : REDLINE
|
Standard Practice for Rubber and Rubber Latices—Nomenclature |
EEMUA 194 : 2012
|
GUIDELINES FOR MATERIALS SELECTION AND CORROSION CONTROL FOR SUBSEA OIL AND GAS PRODUCTION EQUIPMENT |