13/30279896 DC : 0
NA
NA
Status of Standard is Unknown
BS ISO 8178-5 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS
Available format(s)
Hardcopy , PDF
Language(s)
English
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Choice of fuel
6 Overview of fuels
Annex A (informative) - Calculation of the fuel specific
factors
Annex B (informative) - Equivalent non-ISO test methods
Annex C (informative) - Organizations capable of providing
specifications for commercial fuels
Bibliography
BS ISO 8178-5.
| Committee |
MCE/14/-/3
|
| DocumentType |
Draft
|
| Pages |
50
|
| PublisherName |
British Standards Institution
|
| Status |
NA
|
| ISO 3016:1994 | Petroleum products Determination of pour point |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| ISO 3993:1984 | Liquefied petroleum gas and light hydrocarbons — Determination of density or relative density — Pressure hydrometer method |
| EN 237:2004 | Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry |
| ISO 5164:2014 | Petroleum products — Determination of knock characteristics of motor fuels — Research method |
| ISO 8691:1994 | Petroleum products — Low levels of vanadium in liquid fuels — Determination by flameless atomic absorption spectrometry after ashing |
| EN 12916:2016 | Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection |
| CFR 40(PT86.86.1-86.599) : JUL 2012 | PROTECTION OF ENVIRONMENT |
| EN 1601:2017 | Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID) |
| ISO 10307-1:2009 | Petroleum products — Total sediment in residual fuel oils — Part 1: Determination by hot filtration |
| ISO 12937:2000 | Petroleum products — Determination of water — Coulometric Karl Fischer titration method |
| EN 228:2012+A1:2017 | Automotive fuels - Unleaded petrol - Requirements and test methods |
| ISO 22854:2016 | Liquid petroleum products Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel Multidimensional gas chromatography method |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| ASTM D 189 : 2006 : EDT 1 | Standard Test Method for Conradson Carbon Residue of Petroleum Products |
| ASTM D 3244 : 2016-06 | PRACTICE FOR UTILIZATION OF TEST DATA TO DETERMINE CONFORMANCE WITH SPECIFICATIONS |
| ISO 4264:2007 | Petroleum products Calculation of cetane index of middle-distillate fuels by the four-variable equation |
| ISO 1998-6:2000 | Petroleum industry — Terminology — Part 6: Measurement |
| ISO 5165:1998 | Petroleum products Determination of the ignition quality of diesel fuels Cetane engine method |
| ISO 3837:1993 | Liquid petroleum products — Determination of hydrocarbon types — Fluorescent indicator adsorption method |
| EN 116:2015 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method |
| ISO 8178-1:2017 | Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement systems of gaseous and particulate emissions |
| ISO 7536:1994 | Petroleum products — Determination of oxidation stability of gasoline — Induction period method |
| ISO 3007:1999 | Petroleum products and crude petroleum — Determination of vapour pressure — Reid method |
| EN 24260:1994 | Petroleum products and hydrocarbons - Determination of sulfur content - Wickbold combustion method (ISO 4260:1987) |
| ISO 8754:2003 | Petroleum products — Determination of sulfur content — Energy-dispersive X-ray fluorescence spectrometry |
| ISO 3735:1999 | Crude petroleum and fuel oils Determination of sediment Extraction method |
| ISO 4260:1987 | Petroleum products and hydrocarbons Determination of sulfur content Wickbold combustion method |
| ISO 6251:1996 | Liquefied petroleum gases — Corrosiveness to copper — Copper strip test |
| ISO 10478:1994 | Petroleum products Determination of aluminium and silicon in fuel oils Inductively coupled plasma emission and atomic absorption spectroscopy methods |
| ISO 7941:1988 | Commercial propane and butane Analysis by gas chromatography |
| ISO 2160:1998 | Petroleum products Corrosiveness to copper Copper strip test |
| ISO 12156-1:2016 | Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method |
| ISO 8216-1:2017 | Petroleum products — Fuels (class F) classification — Part 1: Categories of marine fuels |
| ISO 6615:1993 | Petroleum products Determination of carbon residue Conradson method |
| ASTM D 86 : 2017-06 | TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE |
| ISO 8217:2017 | Petroleum products — Fuels (class F) — Specifications of marine fuels |
| ASTM D 3343 : 2016 : REDLINE | Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels |
| ISO 1998-99:2000 | Petroleum industry — Terminology — Part 99: General and index |
| EN 589:2008+A1:2012 | Automotive fuels - LPG - Requirements and test methods |
| ISO 5163:2014 | Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method |
| ISO 1998-2:1998 | Petroleum industry Terminology Part 2: Properties and tests |
| ASTM D 4530 : 2015 : REDLINE | Standard Test Method for Determination of Carbon Residue (Micro Method) |
| ISO 10370:2014 | Petroleum products — Determination of carbon residue — Micro method |
| ISO 1998-1:1998 | Petroleum industry Terminology Part 1: Raw materials and products |
| ASTM D 5580 : 2015 : REDLINE | Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, <emph type="ital"> p/m</emph>-Xylene, <emph type="ital">o</emph>-Xylene, C<inf>9</inf> and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography |
| ISO 12205:1995 | Petroleum products — Determination of the oxidation stability of middle-distillate fuels |
| ISO 1998-7:1998 | Petroleum industry Terminology Part 7: Miscellaneous terms |
| ISO 3733:1999 | Petroleum products and bituminous materials — Determination of water — Distillation method |
| ISO 10307-2:2009 | Petroleum products — Total sediment in residual fuel oils — Part 2: Determination using standard procedures for ageing |
| ISO 6245:2001 | Petroleum products — Determination of ash |
| ISO 6246:2017 | Petroleum products — Gum content of fuels — Jet evaporation method |
| ISO 6296:2000 | Petroleum products Determination of water Potentiometric Karl Fischer titration method |
| ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
| ISO 14597:1997 | Petroleum products — Determination of vanadium and nickel content — Wavelength-dispersive X-ray fluorescence spectrometry |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
| ISO 3830:1993 | Petroleum products Determination of lead content of gasoline Iodine monochloride method |
| ISO 8973:1997 | Liquefied petroleum gases — Calculation method for density and vapour pressure |
| ASTM D 3237 : 2017 : REDLINE | Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy |
| ISO 4256:1996 | Liquefied petroleum gases — Determination of gauge vapour pressure — LPG method |
| ISO 1998-4:1998 | Petroleum industry Terminology Part 4: Refining |
| ASTM D 5186 : 2015 : REDLINE | TEST METHOD FOR DETERMINATION OF THE AROMATIC CONTENT AND POLYNUCLEAR AROMATIC CONTENT OF DIESEL FUELS AND AVIATION TURBINE FUELS BY SUPERCRITICAL FLUID CHROMATOGRAPHY |
| ISO 8178-4:2017 | Reciprocating internal combustion engines Exhaust emission measurement Part 4: Steady-state and transient test cycles for different engine applications |
| CFR 40(PTS1000-END) : JUL 2016 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY AND DEPARTMENT OF JUSTICE COUNCIL ON ENVIRONMENTAL QUALITY |
| ISO 3405:2011 | Petroleum products Determination of distillation characteristics at atmospheric pressure |
| ISO 6326-5:1989 | Natural gas Determination of sulfur compounds Part 5: Lingener combustion method |
| ISO 13757:1996 | Liquefied petroleum gases — Determination of oily residues — High-temperature method |
| ISO 14596:2007 | Petroleum products — Determination of sulfur content — Wavelength-dispersive X-ray fluorescence spectrometry |
| ISO 8819:1993 | Liquefied petroleum gases — Detection of hydrogen sulfide — Lead acetate method |
| ISO 8178-11:2006 | Reciprocating internal combustion engines Exhaust emission measurement Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions |
| ISO 1998-3:1998 | Petroleum industry Terminology Part 3: Exploration and production |
| ISO 3105:1994 | Glass capillary kinematic viscometers — Specifications and operating instructions |
| ASTM D 2622 : 2016 : REDLINE | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
| ISO 4262:1993 | Petroleum products — Determination of carbon residue — Ramsbottom method |
| ASTM D 1838 : 2016 : REDLINE | Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases |
| ASTM D 3341 : 2016 : REDLINE | Standard Test Method for Lead in Gasoline—Iodine Monochloride Method |
| ASTM D 2274 : 2014 : REDLINE | Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method) |
| ASTM D 1945 : 2014 : REDLINE | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
| ISO 3015:1992 | Petroleum products — Determination of cloud point |
| ASTM D 5191 : 2015-10 | TEST METHOD FOR VAPOR PRESSURE OF PETROLEUM PRODUCTS (MINI METHOD) |
| CFR 40(PT86.86.600-END) : JUL 2015 | PROTECTION OF ENVIRONMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.