17/30326671 DC : 0
NA
NA
Status of Standard is Unknown
BS ISO 27919-1 - CARBON DIOXIDE CAPTURE - PART 1: PERFORMANCE EVALUATION METHODS FOR POST-COMBUSTION CO[2] CAPTURE INTEGRATED WITH A POWER PLANT
Available format(s)
Hardcopy , PDF
Language(s)
English
Publisher
€22.71
Excluding VAT
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Defining the system boundary
5 Definition of basic PCC plant performance
6 Definition of utilities and consumption calculation
7 Guiding principle - Basis for PCC plant performance
assessment
8 Instruments and measurement methods
9 Evaluation of key performance indicators
Annex A - Test principles and guidelines
Annex B - Instruments and measurement methods
Annex C - Additional approaches of performance evaluation
for a PCC plant integrated with a power plant
Annex E - Standard reference conditions
Annex F - Check list for performance evaluation
Bibliography
BS ISO 27919-1.
| Committee |
PSE/265
|
| DocumentType |
Draft
|
| Pages |
81
|
| PublisherName |
British Standards Institution
|
| Status |
NA
|
| Supersedes |
| ISO/TR 15377:2007 | Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167 |
| ISO 5167-3:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 3: Nozzles and Venturi nozzles |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| IEC 60044-7:1999 | Instrument transformers - Part 7: Electronic voltage transformers |
| ISO 10795:2011 | Space systems — Programme management and quality — Vocabulary |
| IEC 61869-3:2011 | Instrument transformers - Part 3: Additional requirements for inductive voltage transformers |
| ISO 6974-6:2002 | Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns |
| ISO 6327:1981 | Gas analysis — Determination of the water dew point of natural gas — Cooled surface condensation hygrometers |
| ISO 5168:2005 | Measurement of fluid flow — Procedures for the evaluation of uncertainties |
| IEC 60044-8:2002 | Instrument transformers - Part 8: Electronic current transformers |
| ISO 6974-2:2012 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 2: Uncertainty calculations |
| ISO 12242:2012 | Measurement of fluid flow in closed conduits — Ultrasonic transit-time meters for liquid |
| ISO 6974-4:2000 | Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns |
| IEC 61869-2:2012 | Instrument transformers - Part 2: Additional requirements for current transformers |
| ISO/IEC Guide 98-1:2009 | Uncertainty of measurement — Part 1: Introduction to the expression of uncertainty in measurement |
| ISO/TR 16344:2012 | Energy performance of buildings — Common terms, definitions and symbols for the overall energy performance rating and certification |
| ISO 15713:2006 | Stationary source emissions — Sampling and determination of gaseous fluoride content |
| ISO 7935:1992 | Stationary source emissions — Determination of the mass concentration of sulfur dioxide — Performance characteristics of automated measuring methods |
| ISO 5167-4:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 4: Venturi tubes |
| ISO 6974-3:2000 | Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns |
| ISO 25597:2013 | Stationary source emissions — Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology — Basic and general concepts and associated terms (VIM) |
| ISO 5167-2:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 2: Orifice plates |
| IEC 60953-1:1990 | Rules for steam turbine thermal acceptance tests. Part 1: Method A - High accuracy for large condensing steam turbines |
| ISO 5167-5:2016 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 5: Cone meters |
| ISO 12039:2001 | Stationary source emissions — Determination of the mass concentration of carbon monoxide, carbon dioxide and oxygen in flue gas — Performance characteristics of automated measuring systems |
| ISO 1213-1:1993 | Solid mineral fuels — Vocabulary — Part 1: Terms relating to coal preparation |
| EN 1911:2010 | Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method |
| ISO 13443:1996 | Natural gas — Standard reference conditions |
| ISO/TR 9464:2008 | Guidelines for the use of ISO 5167:2003 |
| ISO 27913:2016 | Carbon dioxide capture, transportation and geological storage — Pipeline transportation systems |
| ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 1: General principles and requirements |
| BS 7405:1991 | Guide to selection and application of flowmeters for the measurement of fluid flow in closed conduits |
| ISO 14164:1999 | Stationary source emissions — Determination of the volume flowrate of gas streams in ducts — Automated method |
| IEC 60953-2:1990 | Rules for steam turbine thermal acceptance tests. Part 2: Method B - Wide range of accuracy for various types and sizes of turbines |
| IEC 61869-5:2011 | Instrument transformers - Part 5: Additional requirements for capacitor voltage transformers |
| ISO 6974-1:2012 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 1: General guidelines and calculation of composition |
| IEC 60953-3:2001 | Rules for steam turbine thermal acceptance tests - Part 3: Thermal performance verification tests of retrofitted steam turbines |
| ISO 10849:1996 | Stationary source emissions — Determination of the mass concentration of nitrogen oxides — Performance characteristics of automated measuring systems |
| ISO 17089-1:2010 | Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 1: Meters for custody transfer and allocation measurement |
| ISO 10780:1994 | Stationary source emissions — Measurement of velocity and volume flowrate of gas streams in ducts |
| ISO 17179:2016 | Stationary source emissions — Determination of the mass concentration of ammonia in flue gas — Performance characteristics of automated measuring systems |
| ISO 2186:2007 | Fluid flow in closed conduits — Connections for pressure signal transmissions between primary and secondary elements |
| ISO/TR 27912:2016 | Carbon dioxide capture — Carbon dioxide capture systems, technologies and processes |
| ISO 3966:2008 | Measurement of fluid flow in closed conduits — Velocity area method using Pitot static tubes |
| ISO 10396:2007 | Stationary source emissions — Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems |
| ISO 6974-5:2014 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons |
| ISO 17089-2:2012 | Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 2: Meters for industrial applications |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.