17/30356403 DC : 0
NA
Status of Standard is Unknown
BS EN 17116-3 - SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 3: CONTINUOUS TUNNEL WASHER
Hardcopy , PDF
English
Important note : Users cannot be edited or removed once added to your Multi user PDF.
European foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Requirements
5 General test conditions
6 Determination of wash performance effects
7 Determination of energy consumption
8 Determination of water consumption
9 Determination of detergent consumption
10 Determination of hourly production output
11 Machine information
Annex A (normative) - Specification of reference washing
machine
Annex B (normative) - Specification of test pieces with
standardized stains/soiling
Annex C (normative) - Specification of the wash process
control sheet for secondary wash performance
Annex D (normative) - Specification of the rinse
performance fabrics
Annex E (normative) - Type and dosage of detergents for
the reference machine
Annex F (normative) - Washing conditions in reference
machine
Annex G (normative) - Continuous tunnel washer process
parameters
Annex H (normative) - Type and dosage of detergents and
wash additives for the continuous tunnel washer
Annex I (normative) - Steam measurement system
Annex J (normative) - Gas consumption measurement
Annex K (normative) - Required water quality characteristics
Annex L (informative) - Determination of nominal load
Annex M (informative) - Data loggers for measuring the
liquor temperature
Annex N (informative) - Measurement Tolerances
Annex O (informative) - Testing procedure to prepare the load
to the correct nominal load
Annex P (normative) - Test tolerances
Annex Q (normative) - Declaration of energy consumption and
productivity of continuous tunnel washers
Annex ZA (informative) - Relationship between this
European Standard and the requirements of
Directive 2009/125/EC establishing a framework
for the setting of ecodesign requirements for
energy-related products
Bibliography
BS EN 17116-3.
| Committee |
TCI/33
|
| DocumentType |
Draft
|
| Pages |
75
|
| PublisherName |
British Standards Institution
|
| Status |
NA
|
| Standards | Relationship |
| PREN 17116-3 : DRAFT 2017 | Identical |
| ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
| EN 50160 : 2010 AMD 1 2015 | VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS |
| ISO 7211-2:1984 | Textiles — Woven fabrics — Construction — Methods of analysis — Part 2: Determination of number of threads per unit length |
| IEC 60038:2009 | IEC standard voltages |
| EN ISO 3759:2011 | Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change (ISO 3759:2011) |
| EN ISO 80000-1:2013 | Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
| ISO 9398-1:2003 | Specifications for industrial laundry machines — Definitions and testing of capacity and consumption characteristics — Part 1: Flatwork ironing machines |
| EN ISO 13934-1:2013 | Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013) |
| EN ISO 2060:1995 | Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method (ISO 2060:1994) |
| DIN 38409-23:2010-12 | German standard methods for the examination of water, waste water and sludge - Parameters characterizing effects and substances (group H) - Part 23: Determination of bismut active substances (H 23) |
| IEC 60734:2012 | Household electrical appliances - Performance - Water for testing |
| RAL GZ 992 : 2011 | |
| EN 1773:1996 | Textiles - Fabrics - Determination of width and length |
| ISO 3759:2011 | Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change |
| EN ISO 10472-3:2008 | Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997) |
| ISO 10472-1:1997 | Safety requirements for industrial laundry machinery Part 1: Common requirements |
| DIN 61101-1:1979-01 | WEAVES - GENERAL TERMS, BASIC WEAVES |
| ISO 2267:1986 | Surface active agents Evaluation of certain effects of laundering Methods of preparation and use of unsoiled cotton control cloth |
| ISO 4312:1989 | Surface active agents — Evaluation of certain effects of laundering — Methods of analysis and test for unsoiled cotton control cloth |
| ISO 2060:1994 | Textiles — Yarn from packages — Determination of linear density (mass per unit length) by the skein method |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| DIN 53923:1978-01 | Testing of textiles; determination of water absorption of textile fabrics |
| ISO 2061:2015 | Textiles Determination of twist in yarns Direct counting method |
| ISO 139:2005 | Textiles — Standard atmospheres for conditioning and testing |
| EN 1049-2:1993 | Textiles - Woven fabrics - Construction - Methods of analysis - Part 2: Determination of number of threads per unit length (ISO 7211-2:1984 modified) |
| ISO 15797:2002 | Textiles Industrial washing and finishing procedures for testing of workwear |
| ISO 9398-3:2003 | Specifications for industrial laundry machines Definitions and testing of capacity and consumption characteristics Part 3: Washing tunnels |
| EN 12127:1997 | Textiles - Fabrics - Determination of mass per unit area using small samples |
| ISO 10472-3:1997 | Safety requirements for industrial laundry machinery Part 3: Washing tunnel lines including component machines |
| EN ISO 2061:2015 | Textiles - Determination of twist in yarns - Direct counting method (ISO 2061:2015) |
| EN 60038:2011 | CENELEC STANDARD VOLTAGES (IEC 60038:2009, MODIFIED) |
| EN ISO 10472-1:2008 | Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.