EN 2334 : 1997
|
AEROSPACE SERIES - CHROMIC-SULPHURIC ACID PICKLE OF ALUMINIUM AND ALUMINIUM ALLOYS |
EN 4160:2011
|
Aerospace series - Paints and varnishes - Determination of the effect of thermal exposure |
EN ISO 4628-2:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
EN 4704:2012
|
Aerospace series - Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA) |
MIL-PRF-6081 Revision E:2014
|
LUBRICATING OIL, JET ENGINE |
EN ISO 4628-8:2012
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012) |
EN ISO 2431:2011
|
Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) |
DEFSTAN 68-10/1(1970) : 1970
|
CORROSION PREVENTIVE COMPOUND: WATER DISPLACING. NATO CODE C-634 JOINT SERVICE DESIGNATION: PX-24 |
MIL-PRF-5606 Revision H:2002
|
HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
EN ISO 1524:2013
|
Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2013) |
SAE AMS 1527 : 2014
|
CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, FOAM-ON, PRESSURE-SPRAYING |
EN ISO 2811-2:2011
|
Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011) |
EN ISO 2409:2013
|
Paints and varnishes - Cross-cut test (ISO 2409:2013) |
EN ISO 4628-10:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2016, Corrected version 2016-06-01) |
EN ISO 9227:2017
|
Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
EN ISO 3675:1998
|
Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
EN ISO 3251:2008
|
Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
EN ISO 9514:2005
|
Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005) |
EN 4689:2012
|
Aerospace series - Paints and varnishes - Two components cold curing polyurethane finish - High flexibility and chemical agent resistance for military application |
EN ISO 2811-1:2016
|
Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
EN 2437 : 2001
|
AEROSPACE SERIES - CHROMATE CONVERSION COATINGS (YELLOW) FOR ALUMINIUM AND ALUMINIUM ALLOYS |
EN ISO 2811-3:2011
|
Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011) |
EN ISO 1513:2010
|
Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010) |
MIL-PRF-23699 Revision G:2014
|
Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
EN ISO 3680:2004
|
Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004) |
EN ISO 9117-1:2009
|
Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009) |
EN ISO 1518-1:2011
|
Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2011) |
EN 3665 : 1997
|
AEROSPACE SERIES - TEST METHODS FOR PAINTS AND VARNISHES - FILIFORM CORROSION RESISTANCE TEST ON ALUMINIUM ALLOYS |
EN 2101 : 1991
|
AEROSPACE SERIES - CHROMIC ACID ANODIZING OF ALUMINIUM AND WROUGHT ALUMINIUM ALLOYS |
MIL-DTL-83133 Revision J:2015
|
TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
EN ISO 2811-4:2011
|
Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011) |
EN ISO 1520:2006
|
Paints and varnishes - Cupping test (ISO 1520:2006) |
EN ISO 11890-1:2007
|
Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
SAE AMS 1526 : 2008
|
CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, PRESSURE-SPRAYING TYPE |
ISO 3270:1984
|
Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
EN ISO 1519:2011
|
Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
EN ISO 3679:2015
|
Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
SAE AMS 1533 : 2008
|
CLEANER FOR EXTERIOR AIRCRAFT SURFACES, GEL-TYPE, SOLVENT-BASE |
EN ISO 3678:1995
|
Paints and varnishes - Print-free test (ISO 3678:1976) |
EN 3840:2007
|
Aerospace series - Paints and varnishes - Technical specification |
EN ISO 2813:2014
|
Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014) |
EN ISO 9117-3:2010
|
Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010) |