AAMI TIR18:2010
Current
Current
The latest, up-to-date edition.
GUIDANCE ON ELECTROMAGNETIC COMPATIBILITY OF MEDICAL DEVICES IN HEALTHCARE FACILITIES
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
08-03-2010
€229.17
Excluding VAT
Glossary of equivalent standards
Committee representation
Foreword
1 Introduction and scope (ALL)
2 Definitions and abbreviations (ALL)
3 General recommendations (ALL)
4 Assessment of the electromagnetic environment
in existing facilities (TECH)
5 Management of the electromagnetic environment
(TECH, ADMIN, PSRM, MED)
6 Management of medical devices for EMC (TECH,
ADMIN, PSRM)
7 Identification, investigation, and reporting of
EMI problems (TECH, MED, ADMIN, PSRM)
8 Site selection, design, and construction of facilities
(TECH, ADMIN, HCA)
9 Education and training (ALL)
Annexes
A - Principles of electromagnetic energy and interference
mechanisms (TECH)
B - Selected case studies in EMI problems (TECH, MED, PSRM)
C - Model electromagnetic compatibility (EMC) and radiofrequency
wireless technology policy and guidance for developing EMC
and wireless policies (ADMIN, PSRM, HCA)
D - Overview of surveys of electromagnetic environments associated
with healthcare facilities (TECH)
E - Example of manufacturer declaration of electrosurgical
generator meeting IEC 60601-1-2 (TECH, ADMIN, MED)
F - Bibliography (ALL)
Specifies information, guidance, and general recommendations regarding electromagnetic compatibility (EMC) of medical devices and the use of wireless technology in healthcare facilities to promote patient safety.
| Committee |
EM
|
| DocumentType |
Technical Report
|
| ISBN |
1-57020-379-2
|
| Pages |
78
|
| PublisherName |
Association for the Advancement of Medical Instrumentation
|
| Status |
Current
|
| Supersedes |
| BS EN 61326-2-6:2013 | Electrical equipment for measurement, control and laboratory use. EMC requirements Particular requirements. In vitro diagnostic (IVD) medical equipment |
| CEI EN 61326-2-6 : 2014 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 2-6: PARTICULAR REQUIREMENTS - IN VITRO DIAGNOSTIC (IVD) MEDICAL EQUIPMENT |
| AAMI/IEC TIR80001-2-3:2012 | APPLICATION OF RISK MANAGEMENT FOR IT-NETWORKS INCORPORATING MEDICAL DEVICES - PART 2-3: GUIDANCE FOR WIRELESS NETWORKS |
| ISO/TR 21730:2007 | Health informatics — Use of mobile wireless communication and computing technology in healthcare facilities — Recommendations for electromagnetic compatibility (management of unintentional electromagnetic interference) with medical devices |
| ANSI/AAMI/IEC 60601-1-2:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| PD ISO/TR 21730:2007 | Health informatics. Use of mobile wireless communication and computing technology in healthcare facilities. Recommendations for electromagnetic compatibility (management of unintentional electromagnetic interference) with medical devices |
| 10/30216029 DC : 0 | BS EN 61326-2-6 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 2-6: PARTICULAR REQUIREMENTS - IN VITRO DIAGNOSTIC (IVD) MEDICAL EQUIPMENT |
| IEC 61326-2-6:2012 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
| PD IEC/TR 80001-2-3:2012 | Application of risk management for IT-networks incorporating medical devices Guidance for wireless networks |
| IEEE DRAFT 1073.0.1 : D01J 2006 | HEALTH INFORMATICS - POINT-OF-CARE MEDICAL DEVICE COMMUNICATION - TECHNICAL REPORT - GUIDELINES FOR THE USE OF RF WIRELESS TECHNOLOGY |
| EN 61326-2-6:2013 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
| AAMI TIR69 : 2017 | RISK MANAGEMENT OF RADIO-FREQUENCY WIRELESS COEXISTENCE FOR MEDICAL DEVICES AND SYSTEMS |
| ISO/IEC TR 20017:2011 | Information technology — Radio frequency identification for item management — Electromagnetic interference impact of ISO/IEC 18000 interrogator emitters on implantable pacemakers and implantable cardioverter defibrillators |
| IEEE/ANSI C63.18-2014 REDLINE | American National Standard Recommended Practice for an On-Site, Ad Hoc Test Method for Estimating Electromagnetic Immunity of Medical Devices to Radiated Radio-Frequency (RF) Emissions from RF Transmitters |
| IEC TR 80001-2-3:2012 | Application of risk management for IT-networks incorporating medical devices - Part 2-3: Guidance for wireless networks |
| I.S. EN 61326-2-6:2013 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 2-6: PARTICULAR REQUIREMENTS - IN VITRO DIAGNOSTIC (IVD) MEDICAL EQUIPMENT (IEC 61326-2-6:2012 (EQV)) |
| IEC 60601-1-2:2007 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests |
| IEEE C95.7-2014 | IEEE Recommended Practice for Radio Frequency Safety Programs, 3 kHz to 300 GHz |
| 12/30159217 DC : 0 | BS EN 60601-1-2 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| IEEE/ANSI C63.27-2017 | American National Standard for Evaluation of Wireless Coexistence |
| ETSI EN 302 195-1 V1.1.1 (2004-03) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio equipment in the frequency range 9 kHz to 315 kHz for Ultra Low Power Active Medical Implants (ULP-AMI) and accessories; Part 1: Technical characteristics and test methods |
| AAMI PC69 : 2007 | |
| IEC 61326-2-6:2012 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
| IEC 61326-2-3:2012 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| IEEE/ANSI C63.18-2014 REDLINE | American National Standard Recommended Practice for an On-Site, Ad Hoc Test Method for Estimating Electromagnetic Immunity of Medical Devices to Radiated Radio-Frequency (RF) Emissions from RF Transmitters |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| IEEE 802.11-2016 | IEEE Standard for Information technology--Telecommunications and information exchange between systems Local and metropolitan area networks--Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications |
| IEC TR 61000-5-2:1997 | Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling |
| ISO/TR 16056-1:2004 | Health informatics — Interoperability of telehealth systems and networks — Part 1: Introduction and definitions |
| ISO/TR 21730:2007 | Health informatics — Use of mobile wireless communication and computing technology in healthcare facilities — Recommendations for electromagnetic compatibility (management of unintentional electromagnetic interference) with medical devices |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| ISO 21647:2004 | Medical electrical equipment — Particular requirements for the basic safety and essential performance of respiratory gas monitors |
| CISPR 22:2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| IEC 60601-1-2:2014 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
| ISO/TR 16056-2:2004 | Health informatics — Interoperability of telehealth systems and networks — Part 2: Real-time systems |
| IEEE/ANSI C63.14-2014 REDLINE | American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3) |
| MIL-STD-461 Revision G:2015 | Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| IEC TR 61000-5-6:2002 | Electromagnetic compatibility (EMC) - Part 5-6: Installation and mitigation guidelines - Mitigation of external EM influences |
| IEC 61000-3-3:2013 RLV | Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
| IEEE 802.16-2012 | IEEE Standard for Air Interface for Broadband Wireless Access Systems |
| ISO 9919:2005 | Medical electrical equipment — Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use |
| IEC 61326-2-2:2012 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems |
| ISO/TR 18307:2001 | Health informatics — Interoperability and compatibility in messaging and communication standards — Key characteristics |
| IEC 61326-2-1:2012 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
| IEEE/ANSI C63.19-2011 REDLINE | American National Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids |
| IEC TR 61000-5-1:1996 | Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 1: General considerations - Basic EMC publication |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.