API 560 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FIRED HEATERS FOR GENERAL REFINERY SERVICE
Hardcopy , PDF
10-08-2021
English
01-02-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 Scope
2 Normative References
3 Terms, Definitions, Symbols, and Abbreviations
4 General
5 Proposals
6 Design Considerations
7 Tubes
8 Headers
9 Piping, Terminals, and Manifolds
10 Tube Supports
11 Refractory Linings
12 Structures and Appurtenances
13 Stacks, Ducts, and Breeching
14 Burners and Auxiliary Equipment
15 Instrument and Auxiliary Connections
16 Shop Fabrication and Field Erection
17 Inspection, Examination, and Testing
Annex A (informative) - Equipment Datasheets
Annex B (informative) - Purchasers Checklist
Annex C (informative) - Proposed Shop-assembly Conditions
Annex D (normative) - Stress Curves for Use in the Design
of Tube-support Elements
Annex E (normative) - Centrifugal Fans for Fired-heater
Systems
Annex F (normative) - Air-preheat Systems for Fired-process
Heaters
Annex G (informative) - Measurement of Efficiency of
Fired-process Heaters
Annex H (informative) - Stack Design
Annex I (informative) - Measurement of Noise from
Fired-process Heaters
Annex J (normative) - Refractory Compliance Data Sheet
Bibliography
Describes requirements and gives recommendations for the design, materials, fabrication, inspection, testing, preparation for shipment, and erection of fired heaters, air preheaters, fans and burners for general refinery service.
| DevelopmentNote |
NEW CHILD ADD 1 2021 IS NOW ADDED New child ADD 2 2023 is now added
|
| DocumentType |
Standard
|
| Pages |
344
|
| ProductNote |
This product is unavailable in Cuba, Iran, North Korea, Syria NEW CHILD ADD 1 2021 IS NOW ADDED New child ADD 2 2023 is now added
|
| PublisherName |
American Petroleum Institute
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| API 9100B : 1998 | GUIDANCE DOCUMENT FOR MODEL EHS MANAGEMENT SYSTEM |
| API 936 : 2014 | REFRACTORY INSTALLATION QUALITY CONTROL - INSPECTION AND TESTING MONOLITHIC REFRACTORY LININGS AND MATERIALS |
| API 2001 : 2012 | FIRE PROTECTION IN REFINERIES |
| API 530 : 2015 | CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
| NFPA 87 : 2018 | FLUID HEATERS |
| ASME PTB 2 : 2009 | GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY |
| API 534 : 2007 : R2013 | HEAT RECOVERY STEAM GENERATORS |
| API 538 : 2015 | INDUSTRIAL FIRED BOILERS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE |
| I.S. EN ISO 14224:2016 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016) |
| PIP RFSA1000 : 2015 | REFRACTORY ANCHOR AND ACCESSORY SPECIFICATION |
| API 530 REDLINE : 2008 | CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
| API 536 : 2017 | POST-COMBUSTION NO[X] CONTROL FOR FIRED EQUIPMENT IN GENERAL REFINERY AND PETROCHEMICAL SERVICES |
| API 578 : 2018 | GUIDELINES FOR A MATERIAL VERIFICATION PROGRAM (MVP) FOR NEW AND EXISTING ASSETS |
| API 551 : 2016 | PROCESS MEASUREMENT |
| ISO 14224:2016 | Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment |
| API 537:2017+ADD 1:2020 | FLARE DETAILS FOR PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES |
| API 533 : 1ED 86 | AIR PREHEAT SYSTEMS FOR PROCESS HEATERS |
| API 535 : 2014 | BURNERS FOR FIRED HEATERS IN GENERAL REFINERY SERVICES |
| API 573 : 2013 | INSPECTION OF FIRED BOILERS AND HEATERS |
| API 534 : 2007 | HEAT RECOVERY STEAM GENERATORS |
| API 537 : 2017 | FLARE DETAILS FOR PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES |
| API 556 : 2011 | INSTRUMENTATION, CONTROL, AND PROTECTIVE SYSTEMS FOR GAS FIRED HEATERS |
| API 556 REDLINE : 2011 | INSTRUMENTATION, CONTROL, AND PROTECTIVE SYSTEMS FOR GAS FIRED HEATERS |
| BS EN ISO 14224:2016 | Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment |
| API RP 534:2007(R2023) | Heat Recovery Steam Generators |
| ASTM C 553 : 2013 : REDLINE | Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications |
| ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
| API 936 : 2014 | REFRACTORY INSTALLATION QUALITY CONTROL - INSPECTION AND TESTING MONOLITHIC REFRACTORY LININGS AND MATERIALS |
| ISO 15649:2001 | Petroleum and natural gas industries — Piping |
| AMCA 803 : 2002(R2008) | INDUSTRIAL PROCESS/POWER GENERATION FANS: SITE PERFORMANCE TEST STANDARD |
| API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| AWS D14.6/D14.6M : 2005 | SPECIFICATION FOR WELDING OF ROTATING ELEMENTS OF EQUIPMENT |
| NACE 3 : 2007 | COMMERCIAL BLAST CLEANING |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| ISO 10684:2004 | Fasteners — Hot dip galvanized coatings |
| ASTM A 297/A297M : 2017 : REDLINE | Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application |
| API 535 : 2014 | BURNERS FOR FIRED HEATERS IN GENERAL REFINERY SERVICES |
| NEMA SM 23-1991 (R1997, R2002) | STEAM TURBINES FOR MECHANICAL DRIVE SERVICE |
| ASTM D 5504 : 2012 : REDLINE | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| ASME B31.3:2016 | PROCESS PIPING |
| ISO 1940-1:2003 | Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
| ASME PV CODE 8 DIV 3 : 2017 | BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| ASTM C 612 : 2014 : REDLINE | Standard Specification for Mineral Fiber Block and Board Thermal Insulation |
| AMCA 210 : 2016 | LABORATORY METHODS OF TESTING FANS FOR CERTIFIED AERODYNAMIC PERFORMANCE RATING |
| ASTM E 1172 : 2016 : REDLINE | Standard Practice for Describing and Specifying a Wavelength Dispersive X-Ray Spectrometer |
| ASTM C 27 : 1998 | Standard Classification of Fireclay and High-Alumina Refractory Brick |
| ASME STS 1 : 2011 | Steel Stacks (STS-1 - 2011) |
| ASME B17.1 : 1967 | KEYS AND KEYSEATS |
| ASTM C 332 : 2017 : REDLINE | Standard Specification for Lightweight Aggregates for Insulating Concrete |
| ICC IBC INTERNATIONAL BUILDING CODE : 2015 | INTERNATIONAL BUILDING CODE |
| MSS SP 53 : 2012 | QUALITY STANDARD FOR STEEL CASTINGS AND FORGINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - MAGNETIC PARTICLE EXAMINATION METHOD |
| API 530 : 2015 | CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| SSPC-SP 6 : 2015 | COMMERCIAL BLAST CLEANING |
| MSS SP 93 : 2014 | QUALITY STANDARD FOR STEEL CASTINGS AND FORGINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - LIQUID PENETRANT EXAMINATION METHOD |
| API 610 : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| ASTM A 384 : 2002 | PRACTICE FOR SAFEGUARDING AGAINST WARPAGE AND DISTORTION DURING HOT-DIP GALVANIZING OF STEEL ASSEMBLIES |
| ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| API 673 : 2014 | CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| ASTM C 201 : 1993 : R2019 | Standard Test Method for Thermal Conductivity of Refractories |
| MSS SP 55 : 2011 | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES |
| AWS D1.1/D1.1M : 2015 | STRUCTURAL WELDING CODE-STEEL |
| AMCA 802 : 2002(R2008) | INDUSTRIAL PROCESS/POWER GENERATION FANS - ESTABLISHING PERFORMANCE USING LABORATORY MODELS |
| ASTM A 515/A515M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
| AMCA 203 : 90(R2011) | FIELD PERFORMANCE MEASUREMENT OF FAN SYSTEMS |
| API 536 : 2017 | POST-COMBUSTION NO[X] CONTROL FOR FIRED EQUIPMENT IN GENERAL REFINERY AND PETROCHEMICAL SERVICES |
| API 555 : 2013 | PROCESS ANALYZERS |
| AMCA 801 : 2001(R2008) | INDUSTRIAL PROCESS/POWER GENERATION FANS - SPECIFICATIONS GUIDELINES |
| ASTM C 1113 : 1999 | Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique) |
| AISC S326 : 1978 | SPECIFICATION FOR THE DESIGN, FABRICATION AND ERECTION OF STRUCTURAL STEEL FOR BUILDINGS (WITH COMMENTARY) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.