API 571 REDLINE : 2011
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE REFINING INDUSTRY
Hardcopy , PDF
05-02-2024
English
01-01-2011
SECTION 1 - INTRODUCTION AND SCOPE
SECTION 2 - REFERENCES
SECTION 3 - DEFINITION OF TERMS AND ABBREVIATIONS
SECTION 4 - GENERAL DAMAGE MECHANISMS - ALL
INDUSTRIES
SECTION 5 - REFINING INDUSTRY DAMAGE MECHANISMS
ANNEX A - TECHNICAL INQUIRIES
Gives general guidance as to the most likely damage mechanisms affecting common alloys used in the refining and petrochemical industry and is intended to introduce the concepts of service-induced deterioration and failure modes.
| DocumentType |
Redline
|
| Pages |
746
|
| PublisherName |
American Petroleum Institute
|
| Status |
Withdrawn
|
| NACE 8X194 : 2006 | MATERIALS AND FABRICATION PRACTICES FOR NEW PRESSURE VESSELS USED IN WET H[2]S REFINERY SERVICE |
| ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
| API 932B : 2012 | DESIGN, MATERIALS, FABRICATION, OPERATION, AND INSPECTION GUIDELINES FOR CORROSION CONTROL IN HYDROPROCESSING REACTOR EFFLUENT AIR COOLER (REAC) SYSTEMS |
| API 934-C : 2008 | MATERIALS AND FABRICATION OF 1 [1/4]CR-[1/2]MO STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-PRESSURE HYDROGEN SERVICE OPERATING AT OR BELOW 825 DEGREES F (441 DEGREES C) |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| API 653 : 2014 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
| API 581 : 2016 | RISK-BASED INSPECTION METHODOLOGY |
| API 510 : 2014 | PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
| NACE RP 01 98 : 2004 | THE CONTROL OF CORROSION UNDER THERMAL INSULATION AND FIREPROOFING MATERIALS - A SYSTEMS APPROACH |
| API 939-E : 2013 | IDENTIFICATION, REPAIR, AND MITIGATION OF CRACKING OF STEEL EQUIPMENT IN FUEL ETHANOL SERVICE |
| API TR 934-D : 2010 | TECHNICAL REPORT ON THE MATERIALS AND FABRICATION ISSUES OF 1[1/4]CR-[1/2]MO AND 1CR-[1/2]MO STEEL PRESSURE VESSELS |
| API 578 : 2010 | GUIDELINES FOR A MATERIAL VERIFICATION PROGRAM (MVP) FOR NEW AND EXISTING ASSETS |
| API 580 : 2016 | RISK-BASED INSPECTION |
| NACE 34105 : 0 | EFFECT OF NONEXTRACTABLE CHLORIDES ON REFINERY CORROSION AND FOULING |
| NACE SP 04 72 : 2015 | METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS |
| API 939-C : 2009 | GUIDELINES FOR AVOIDING SULFIDATION (SULFIDIC) CORROSION FAILURES IN OIL REFINERIES |
| ASME FFS 1 : 2007 | FITNESS-FOR-SERVICE |
| API 660 : 2015 | SHELL-AND-TUBE HEAT EXCHANGERS |
| NACE SP 05 90 : 2015 | PREVENTION, DETECTION, AND CORRECTION OF DEAERATOR CRACKING |
| API 941 : 2016 | STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS |
| API 530 : 2015 | CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
| NACE RP 02 96 : 2004 | GUIDELINES FOR DETECTION, REPAIR, AND MITIGATION OF CRACKING OF EXISTING PETROLEUM REFINERY PRESSURE VESSELS IN WET H[2]S ENVIRONMENTS |
| NACE RP 01 70 : 2004 | PROTECTION OF AUSTENITIC STAINLESS STEELS AND OTHER AUSTENITIC ALLOYS FROM POLYTHIONIC ACID STRESS CORROSION CRACKING DURING SHUTDOWN OF REFINERY EQUIPMENT |
| API TR 939-D : 2007 | STRESS CORROSION CRACKING OF CARBON STEEL IN FUEL-GRADE ETHANOL: REVIEW, EXPERIENCE SURVEY, FIELD MONITORING, AND LABORATORY TESTING |
| API 934-A : 2008 | MATERIALS AND FABRICATION OF 2 [1/4]CR-1MO, 2 [1/4]CR-1MO-[1/4]V, 3CR-1MO, AND 3CR-1MO-[1/4]V STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-TEMPERATURE, HIGH-PRESSURE HYDROGEN SERVICE |
| API 582 : 2016 | WELDING GUIDELINES FOR THE CHEMICAL, OIL, AND GAS INDUSTRIES |
| API 934-E : 2010 | RECOMMENDED PRACTICE FOR MATERIALS AND FABRICATION OF 1[1/4]CR-[1/2]MO STEEL PRESSURE VESSELS FOR SERVICE ABOVE 825 DEGREES F (440 DEGREES C) |
| API TR 934-B : 2011 | FABRICATION CONSIDERATIONS FOR VANADIUM-MODIFIED CR-MO STEEL HEAVY WALL PRESSURE VESSELS |
| API 570 : 2016 | PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
| ASME PV CODE 3 APP DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR THE CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - APPENDICES |
| NACE RP 01 69 : 2002 | CONTROL OF EXTERNAL CORROSION ON UNDERGROUND OR SUBMERGED METALLIC PIPING SYSTEMS |
| API 579-1 : 2016 | FITNESS-FOR-SERVICE |
| NACE 5A171 : 2007 | MATERIALS FOR STORING AND HANDLING COMMERCIAL GRADES OF AQUEOUS HYDROFLUORIC ACID AND ANHYDROUS HYDROGEN FLUORIDE |
| NACE RP 02 94 : 0 | DESIGN, FABRICATION, AND INSPECTION OF TANKS FOR THE STORAGE OF CONCENTRATED SULFURIC ACID AND OLEUM AT AMBIENT TEMPERATURES |
| NACE 34108 : 0 | REVIEW AND SURVEY OF ALKALINE CARBONATE STRESS CORROSION CRACKING IN REFINERY SOUR WATERS |
| API 577 : 2013 | WELDING PROCESSES, INSPECTION, AND METALLURGY |
| NACE SP 04 03 : 2015 | AVOIDING CAUSTIC STRESS CORROSION CRACKING OF REFINERY EQUIPMENT AND PIPING |
| API 751 : 2013 | SAFE OPERATION OF HYDROFLUORIC ACID ALKYLATION UNITS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.