AS 1154.1-2009
Current
The latest, up-to-date edition.
Insulator and conductor fittings for overhead power lines Performance, material, general requirements and dimensions (Reconfirmed 2019)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
12-02-2009
Important note : Users cannot be edited or removed once added to your Multi user PDF.Provides users and manufacturers of insulators and conductor fittings for overhead power lines with definitions of terms, performance requirements, dimensions, test methods and acceptance criteria.
| Committee |
EL-010
|
| DevelopmentNote |
New PDF incorporating Amendment 1.
|
| DocumentType |
Standard
|
| ISBN |
0 7337 9004 6
|
| Pages |
55
|
| ProductNote |
Reconfirmation Notice 28/06/2019 Reconfirmed 28/06/2019.
This standard has been reconfirmed in Australia in 2019 and remains current in New Zealand. |
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard sets out performance and general requirements for insulator and conductor fittings (other than helical fittings, OPGW and ADSS fittings, which are covered in AS 1154.3) together with the critical dimensions for cast, forged or fabricated insulator fittings for use on overhead electric power lines using insulators with minimum failing loads of 70 kN, 120 kN and 160 kN.Pulling eyes provided to assist installation and fittings for insulated service lines, aerial bundled cables and high-voltage covered conductors are not covered by this Standard.Fittings for high-temperature conductors are not covered by this Standard.
Originated as AS C345.1-1962 and AS C345.2-1967.
Previous edition 2004.
Fifth edition 2009.
Reissued incorporating Amendment No. 1 (May 2020).
| AS 1214-1983 | Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) |
| AS 1866:1997 | Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes (Reconfirmed 2020) |
| AS 1831-2007 | Ductile cast iron (Reconfirmed 2017) |
| AS 1816.1-2007 | Metallic materials - Brinell hardness test Test method (ISO 6506-1:2005, MOD) (Reconfirmed 2017) |
| AS 1112.1-2000 | ISO metric hexagon nuts Style 1 - Product grades A and B |
| AS/NZS CISPR 16.1.1:2006 | Specification for radio disturbance and immunity measuring apparatus and methods Radio disturbance and immunity measuring apparatus - Measuring apparatus |
| AS/NZS 4680:2006 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017) |
| AS 1154.1-2004 | Insulator and conductor fittings for overhead power lines - Performance, material, general requirements and dimensions |
| AS 1832-2007 | Malleable cast iron (Reconfirmed 2017) |
| AS 1112.2-2000 | ISO metric hexagon nuts Style 2 - Product grades A and B |
| AS/NZS 4435.2:1999 | Insulators - Composite for overhead power lines - Voltages greater than 1000 V a.c. Standard strength classes and end fittings for string insulator units (Reconfirmed 2016) |
| AS/NZS 1867:1997 | Aluminium and aluminium alloys - Drawn tubes (Reconfirmed 2020) |
| AS 1733-1976 | Methods for the determination of grain size in metals (Reconfirmed 2018) |
| AS/NZS 1390:1997 | Cup head bolts with ISO metric coarse pitch threads (Reconfirmed 2016) |
| AS 2947.3-1995 | Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c. Couplings |
| AS 1112.4-2000 | ISO metric hexagon nuts Chamfered thin nuts - Product grades A and B |
| AS/NZS CISPR 16.1.4:2004 | Specification for radio disturbance and immunity measuring apparatus and methods Radio disturbance and immunity measuring apparatus - Ancillary equipment - Radiated disturbances |
| AS 1112.3-2000 | ISO metric hexagon nuts - Product grade C |
| AS/NZS CISPR 16.1.5:2004 | Specification for radio disturbance and immunity measuring apparatus and methods Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30 MHz to 1000 MHz |
| AS 1111.1-2000 | ISO metric hexagon bolts and screws - Product grade C - Bolts |
| AS 1544.2-2003 | Method for impact tests on metals Charpy V-notch (Reconfirmed 2017) |
| AS/NZS 3679.1:1996 | Structural steel Hot-rolled bars and sections |
| AS 1110.1-2000 | ISO metric hexagon bolts and screws - Product grades A and B - Bolts |
| AS 62271.301-2005 | High voltage switchgear and controlgear Dimensional standardization of terminals (Reconfirmed 2016) |
| AS 1237.1-2002 | Plain washers for metric bolts, screws and nuts for general purposes General plan (Reconfirmed 2015) |
| AS 1816.3-2007 | Metallic materials - Brinell hardness test Calibration of reference blocks |
| AS 1448-2007 | Carbon steel and carbon-manganese steels - Forgings (ruling section 300 mm maximum) |
| AS/NZS 1559:1997 | Hot-dip galvanized steel bolts and associated nuts and washers for tower construction |
| AS 2074-2003 | Cast steels |
| AS/NZS CISPR 16.1.2:2004 | Specification for radio disturbance and immunity measuring apparatus and methods Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances |
| AS/NZS 2947.4:1999 | Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c. Test methods - Insulator strings and insulator sets |
| AS 1931.1-1996 | High-voltage test techniques - General definitions and test requirements |
| AS/NZS 2947.1:1999 | Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c. Test methods - Insulator units |
| AS 1237.2-2002 | Plain washers for metric bolts, screws and nuts for general purposes - Tolerances |
| AS 1154.3-1985 | Insulator and conductor fittings for overhead power lines - Performance and general requirements for helical fittings |
| AS 1444-2007 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017) |
| AS/NZS 3678:1996 | Structural steel - Hot-rolled plates, floorplates and slabs |
| AS 1816.2-2007 | Metallic materials - Brinell hardness test Verification and calibration of testing machines |
| AS 1442-2007 | Carbon steels and carbon-manganese steels - Hot rolled bars and semifinished products (Reconfirmed 2017) |
| AS 4291.1-2000 | Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs |
| AS/NZS 7000:2016 | Overhead line design |
| HB 331-2012 | Overhead line design |
| AS/NZS 7000:2010 | Overhead line design - Detailed procedures |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.