• There are no items in your cart

AS 1303-1991

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Steel reinforcing wire for concrete

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

29-05-2024

Superseded by

AS/NZS 4671:2001

Language(s)

English

Published date

01-01-1991

€24.96
Excluding VAT

1 - AS 1303-1991 STEEL REINFORCING WIRE FOR CONCRETE
4 - PREFACE
4 - CONTENTS
5 - 1 SCOPE
5 - 2 REFERENCED DOCUMENTS
5 - 3 DEFINITIONS
5 - 3.1 Bundle
5 - 3.2 Coil
5 - 3.3 Deformed wire
5 - 3.4 Deformed wire size
5 - 3.5 Mass per unit length
5 - 3.6 Nominal area
5 - 3.7 Plain wire size
5 - 3.8 Yield strength
5 - 4 CHEMICAL COMPOSITION
5 - 4.1 Composition
6 - 4.2 Methods of sampling and analysis
6 - 5 DIMENSIONS AND MASS
6 - 6 MANUFACTURING TOLERANCES
6 - 6.1 Mass
6 - 6.2 Length
6 - 7 DEFORMATION REQUIREMENTS FOR DEFORMED WIRE
6 - 7.1 Spacing of deformations
6 - 7.2 Depth of deformations
7 - 7.3 Direction
7 - 7.4 Methods of measurement
7 - 8 MECHANICAL PROPERTIES
7 - 8.1 Tensile properties
7 - 8.2 Cold bend properties
7 - 8.3 Condition of test piece
7 - 9 PREPARATION OF TEST PIECES
7 - 10 FREEDOM FROM DEFECTS
7 - 10.1 General
7 - 10.2 Defects after delivery
7 - 11 MARKING
8 - APPENDIX A - PURCHASING GUIDELINES
8 - A1 INFORMATION TO BE SUPPLIED BY THE PURCHASER
8 - A2 INSPECTION
8 - A3 CERTIFICATE OF COMPLIANCE AND TEST CERTIFICATE
8 - A3.1 Certificate of compliance
8 - A3.2 Test certificate
8 - A4 INDEPENDENT TESTS
9 - APPENDIX B - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
9 - B1 SCOPE
9 - B2 STATISTICAL SAMPLING
9 - B3 PRODUCT CERTIFICATION- STANDARDSMARK
9 - B4 SUPPLIER’S QUALITY SYSTEM
9 - B5 OTHER MEANS OF ASSESSMENT
9 - B5.1 General
9 - B5.2 Sampling and testing
9 - B5.3 Compliance
10 - B5.4 Retests
11 - APPENDIX C - METHOD OF STRAIGHTENING STEEL WIRE BY THE USE OF THE 5-ROLL WIRE STRAIGHTENER
11 - C1 SCOPE
11 - C2 APPARATUS
11 - C3 PROCEDURE

This Standard specifies requirements for steel wire, plain or deformed, suitable for resistance welding, and intended for use as reinforcement for concrete and for manufacture into welded wire fabric in accordance with AS 1304. It specifically excludes hard-drawn high tensile steel wire for prestressed concrete. The following significant changes to the previous edition have been made: a carbon equivalent is now specified, manufacturing tolerances in lengths have been amended to comply with AS 3600, changes to the bend test have been made, process of manufacture has been deleted and a warning, on the need to avoid excessive cold-working when straightening wires, has been added.

Committee
BD-084
DocumentType
Standard
ISBN
0 7262 6636 1
Pages
7
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes

This Standard specifies requirements for steel wire, plain or deformed, suitable for resistance welding, and intended for use as reinforcement for concrete and for manufacture into welded wire fabric in accordance with AS 1304. It specifically excludes hard-drawn high tensile steel wire for prestressed concrete, which is dealt with by AS 1310.NOTES:1 For 'Purchasing guidelines', see Appendix A.2 For 'Means for demonstrating compliance with this Standard', see Appendix B.

First published as AS A82-1958.
Second edition 1966.
Third edition 1971.
AS A82-1971 revised and redesignated AS 1303-1973.
AS A82-1971 withdrawn 1976.
Second edition AS 1303-1984.
Third edition AS 1303-1991.

AS 4204-1994 Headstones and cemetery monuments
AS 3700 SUPP 4-1992 Masonry in buildings (known as the SAA Masonry Code) - Extracts from AS 3700 - Masonry construction requirements (Supplement to AS 3700-1988)
AS 3700 SUPP 5-1992 Masonry in buildings (known as the SAA Masonry Code) - Extracts from AS 3700 - Masonry housing requirements (Supplement to AS 3700-1988)
AS 3958.1-1991 Ceramic tiles Guide to the installation of ceramic tiles
AS 3600-2001 Concrete structures
AS 4425-1996 Above ground burial structures
AS 3700 SUPP 3-1992 Masonry in buildings (known as the SAA Masonry Code) - Extracts from AS 3700 - Masonry materials requirements (Supplement to AS 3700-1988)
AS 3990-1993 Mechanical equipment - Steelwork (Reconfirmed 2016)
AS 3600-1994 Concrete structures
AS 3958.1-2007 Ceramic tiles Guide to the installation of ceramic tiles
AS 3700-1998 Masonry structures
AS 4058-1992 Precast concrete pipes (pressure and non-pressure)
AS 3700-2001 Masonry structures
AS/NZS 4065:2000 Concrete utility services poles
HB 67-1995 Concrete practice on building sites
AS/NZS 3845:1999 Road safety barrier systems
AS 1597.1-1974 Precast reinforced concrete box culverts Small culverts (not exceeding 1200 mm width and 900 mm depth)
AS 4198-1994 Precast concrete access chambers for sewerage applications
AS 1597.2-1996 Precast reinforced concrete box culverts Large culverts (from 1500 mm span and up to and including 4200 mm span and 4200 mm height)
AS 2327.1-1996 Composite structures - Simply supported beams
AS/NZS 1546.1:1998 On-site domestic wastewater treatment units - Septic tanks
AS 2783-1992 Use of reinforced concrete for small swimming pools

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.