• There are no items in your cart

AS 1432-1996

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Copper tubes for plumbing, gasfitting and drainage applications

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

23-05-2024

Superseded by

AS 1432-2004

Published date

01-01-1996

€45.79
Excluding VAT

1 - AS 1432-1996 COPPER TUBES FOR PLUMBING, GASFITTING AND DRAINAGE APPLICATIONS
4 - PREFACE
5 - CONTENTS
6 - FOREWORD
7 - 1 SCOPE
7 - 2 REFERENCED DOCUMENTS
7 - 3 DEFINITIONS
7 - 3.1 Bendable temper
7 - 3.2 Mean outside diameter
7 - 3.3 Ovality
7 - 4 CLASSIFICATION
8 - 5 DESIGNATION
8 - 6 INTERPRETATION OF SPECIFIED LIMITING VALUES
8 - 7 CHEMICAL COMPOSITION
9 - 8 CONTAMINATION OF WATER
10 - 9 TEMPER AND FORM OF MATERIAL
10 - 9.1 Temper
10 - 9.2 Form
10 - 10 DIMENSIONS AND TOLERANCES
10 - 10.1 Mean outside diameter
10 - 10.2 Ovality
10 - 10.3 Thickness
10 - 10.4 Length
11 - 11 HARDNESS TEST
11 - 12 FREEDOM FROM DEFECTS
11 - 13 NON-DESTRUCTIVE TEST
11 - 13.1 General
12 - 13.2 Eddy current test
12 - 14 MARKING
12 - 14.1 General
12 - 14.2 Incising
13 - 14.3 Colour coding
13 - 14.3.1 Form
13 - 14.3.2 Colours
13 - 14.3.3 Information
14 - APPENDIX A - PURCHASING GUIDELINES
14 - A1 GENERAL
14 - A2 INFORMATION TO BE SUPPLIED BY THE PURCHASER
14 - A3 CERTIFICATES
14 - A3.1 Certificates of compliance
14 - A3.2 Test certificates
15 - APPENDIX B - SAFE WORKING PRESSURE AND TESTING PRESSURE FOR COPPER TUBES
15 - B1 SAFE WORKING PRESSURE
15 - B2 TESTING PRESSURE
17 - APPENDIX C - HYDROSTATIC TEST
17 - C1 SCOPE
17 - C2 PRINCIPLE
17 - C3 APPARATUS
17 - C4 PROCEDURE
17 - C5 REPORT

Specifies requirements for round, seamless copper tubes, supplied in coils and straight lengths for use in plumbing, gasfitting and drainage applications. The ranges of nominal sizes are DN 6 to DN 200 inclusive for Types A and B, DN 10 to DN 25 inclusive for Type C and DN 32 to DN 150 inclusive for Type D. Details of dimensions and tolerances, chemical composition, temper and form of material, testing and marking are specified. The appendices propose purchasing guidelines, safe working pressure, testing pressure, and hydrostatic test.

Committee
WS-018
DocumentType
Standard
ISBN
0 7337 0357 7
Pages
12
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

This Standard specifies requirements for round seamless copper tubes intended for use in pressure and non-pressure plumbing, gasfitting and drainage applications.NOTES:1 Clause 4 gives classification of tubes covered by this Standard.2 Guidelines to purchasers on information that should be supplied at the time of enquiry or order are detailed in Appendix A.3 Safe working pressure and testing pressure for installed copper tubes are given in Appendix B.

First published as part of AS B2-1928.
Second edition 1950.
Revised and redesignated in part as AS B158-1961.
Second edition 1967.
Third edition 1969.
Revised and redesignated AS 1432-1973.
Second edition 1983.
Third edition 1990.
Fourth edition 1996.

AS 4041-1998 Pressure piping
AS 3500.0-1990 National Plumbing and Drainage Code Glossary of terms
AS 2706-1984 Numerical values - Rounding and interpretation of limiting values
AS 1817-1991 Metallic materials - Vickers hardness test
AS 1349-1986 Bourdon tube pressure and vacuum gauges (Reconfirmed 2018)
AS 3855-1994 Suitability of plumbing and water distribution systems products for contact with potable water
AS 2084-1987 Non-destructive testing - Eddy current testing of metal tubes
AS 2738.2-1984 Copper and copper alloys - Compositions and designations - Wrought products

AS 2896-1991 Medical gas systems - Installation and testing of non-flammable medical gas pipeline systems
AS 2896-1998 Medical gas systems - Installation and testing of non-flammable medical gas pipeline systems
AS 4563-2003 (AG 300) Commercial catering gas equipment
AS 3496-1999 Metal-bodied and plastic-bodied taps
AS 1357.1-2004 Valves primarily for use in heated water systems Protection valves
AS 1882-2002 Earth and bonding clamps (Reconfirmed 2020) (Reconfirmed 2013)
AS 4072.1-1992 Components for the protection of openings in fire-resistant separating elements - Service penetrations and control joints
AS 3688-1994 Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors
AS/NZS 4020:1999 Products for use in contact with drinking water
AS/NZS 3500.1.2:1998 National plumbing and drainage Water supply - Acceptable solutions
AS 1768-1991 Lightning protection
ATS 5200.020-2004 Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with mains supply
AS 4032.2-2002 Water supply - Valves for the control of hot water supply temperatures - Tempering valves and end of line temperature actuated devices
AS 3517-1995 Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications
AS 1718-1992 Water supply - Copper alloy screw-down pattern taps - Specified by dimensions
AS/NZS 3500.4.2:1997 National Plumbing and Drainage Hot water supply systems - Acceptable solutions
AS/NZS 3500.4:2003 Plumbing and drainage Heated water services
AS/NZS 3500.2:2003 Plumbing and drainage Sanitary plumbing and drainage
AS/NZS 1425:1999 LP Gas fuel systems for vehicle engines
AS 3718-1992 Water supply - Metal-bodied taps - Specified by performance
AS 1357.2-1992 Water supply - Valves for use with unvented water heaters - Control valves
AS 2419.1-1991 Fire hydrant installations System design, installation and commissioning
AS 1357.1-1992 Water supply - Valves for use with unvented water heaters Protection valves
AS 4809-2003 Copper pipe and fittings - Installation and commissioning
AS/NZS 3500.3:2003 Plumbing and drainage Stormwater drainage
AS 4554-2002 (AG 104) Gas laundry dryers
AS 2118.9-1995 Automatic fire sprinkler systems Piping support and installation (Reconfirmed 2013)
AS 3500.1-1992 National Plumbing and Drainage Code Water supply
AS 2887-1993 Plastic waste fittings
ATS 5200.007-2004 Technical Specification for plumbing and drainage products - Water hammer arrestors
MP 52-1997 Manual of authorization procedures for plumbing and drainage products
AS 1628-1994 Water supply - Copper alloy gate, globe and non-return valves
AS 1910-1994 Water supply - Float control valves for use in hot and cold water
AS 4041-1992 Pressure piping
AS 1361-1995 Electric heat-exchange water heaters - For domestic applications (Reconfirmed 2016)
ATS 5200.021-2004 Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with break tank supply
AS 4020(INT)-1994 Products for use in contact with water intended for human consumption with regard to their effect on the quality of water
AS/NZS 1425:2003 LP Gas fuel systems for vehicle engines
AS 2712-1993 Solar water heaters - Design and construction
AS 2129-1994 Flanges for pipes, valves and fittings
AS/NZS 3718:2003 Water supply - Tap ware
AS 1357.2-1998 Valves primarily for use in warm and hot water systems - Control valves
AS/NZS 3500.5:2000 Plumbing and Drainage Domestic installations
AS 3500.4-1994 National Plumbing and Drainage Code Hot water supply systems
AS 4983-2003 Gas fuel systems for forklifts and industrial engines
AS 2118.1-1995 Automatic fire sprinkler systems - Standard
MP 52-2001 Manual of authorization procedures for plumbing and drainage products
AS/NZS 2927:2001 The storage and handling of liquefied chlorine gas
AS 3496-1995 Authorization requirements for plumbing products - Metal-bodied and plastic-bodied taps
AS 2419.1-1994 Fire hydrant installations System design, installation and commissioning
AS/NZS 2712:2002 Solar and heat pump water heaters - Design and construction
AS 4118.2.1-1995 Fire sprinkler systems Piping - General (Reconfirmed 2013)
AS/NZS 3500.1:2003 Plumbing and drainage Water services
AS/NZS 3718:1997 Water supply - Metal-bodied taps - Specified by performance
AS 1589-1994 Copper and copper alloy waste fittings
AS/NZS 1768(INT):2003 Lightning protection
AS 1589-2001 Copper and copper alloy waste fittings (Reconfirmed 2018)
AS 4032-1992 Thermostatic mixing valves - Materials, design and performance requirements
AS/NZS 3500.3.2:1998 National plumbing and drainage Stormwater drainage - Acceptable solutions

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.