AS 1448-2007
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Carbon steel and carbon-manganese steels - Forgings (ruling section 300 mm maximum)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
30-06-2017
22-05-2007
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Specifies the requirements for carbon steel and carbon-manganese steel forgings for general engineering purposes with ruling section up to and including 300 mm.
| Committee |
MT-001
|
| DocumentType |
Standard
|
| ISBN |
0 7337 8247 7
|
| Pages |
13
|
| ProductNote |
Withdrawn 28-06-2017.
|
| PublisherName |
Standards Australia
|
| Status |
Withdrawn
|
| Supersedes |
This Standard specifies requirements for carbon steel and carbon-manganese steel forgings for general engineering purposes with ruling section up to and including 300 mm. The Standard provides for the supply of forgings on the following basis:(a) Chemical composition only, as specified in Tables 1 to 4.(b) Chemical composition as specified in Tables 1 to 4, and hardness or other mechanical properties in any heat-treated condition, as negotiated at the time of enquiry and/or order.(c) Chemical composition and mechanical properties in the normalized or normalized and tempered condition as specified in Table 5.NOTES:1 For guidance on purchasing requirements refer to Appendix A.2 To demonstrate a means of compliance to the Standard refer to Appendix B.
Originated as AS G30-1970.
Previous edition AS 1448-1981.
Third edition 2007.
| AS 1391-2007 | Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017) |
| AS/NZS 1554.4:2004 | Structural steel welding - Welding of high strength quenched and tempered steels |
| AS 2062-1997 | Non-destructive testing - Penetrant testing of products and components |
| AS/RISSB 7515 : 2014 | Railway Rolling Stock - Axles |
| AS/NZS 1554.6:1994 | Structural steel welding - Welding stainless steels for structural purposes |
| AS 1544.2-2003 | Method for impact tests on metals Charpy V-notch (Reconfirmed 2017) |
| AS 1391-2005 | Metallic materials - Tensile testing at ambient temperature |
| AS 2706-2003 | Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018) |
| AS 1171-1998 | Non-destructive testing - Magnetic particle testing of ferromagnetic products, components and structures (Reconfirmed 2022) |
| HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
| AS/NZS 1050.1:1996 | Methods for the analysis of iron and steel Sampling iron and steel for chemical analysis |
| AS/NZS 1050.16:1994 | Methods for the analysis of iron and steel Determination of sulfur content - Infrared absorption method after combustion in an induction furnace (Reconfirmed 2017) |
| AS 5016-2004 | Metallic materials - Conversion of hardness values |
| AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
| AS/NZS 1050.18:1994 | Methods for the analysis of iron and steel Determination of phosphorus - Spectrophotometric method (Reconfirmed 2016) |
| AS 1817.1-2003 | Metallic materials - Vickers hardness test Test method (ISO 6507-1:1997, MOD) |
| AS/NZS 1050.14:1994 | Methods for the analysis of iron and steel Determination of manganese in iron and steel - Titrimetric method |
| AS/NZS ISO 9004:2000 | Quality management systems - Guidelines for performance improvements |
| AS/NZS 1554.1:2004 | Structural steel welding Welding of steel structures |
| AS/NZS ISO 9001:2000 | Quality management systems - Requirements |
| AS 1065-1988 | Non-destructive testing - Ultrasonic testing of carbon and low alloy steel forgings (Reconfirmed 2022) |
| AS 1816.1-2007 | Metallic materials - Brinell hardness test Test method (ISO 6506-1:2005, MOD) (Reconfirmed 2017) |
| AS 1199.0-2003 | Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016) |
| AS/NZS 1554.7:2006 | Structural steel welding Welding of sheet steel structures |
| AS/NZS 1554.5:2004 | Structural steel welding Welding of steel structures subject to high levels of fatigue loading |
| AS/NZS 1554.3:2002 | Structural steel welding Welding of reinforcing steel |
| AS 1733-1976 | Methods for the determination of grain size in metals (Reconfirmed 2018) |
| AS/NZS 1554.2:2003 | Structural steel welding Stud welding (steel studs to steel) |
| AS 2740-2001 | Wedge-type sockets |
| AS 2938-1993 | Gears - Spur and helical - Guide to specification and rating |
| AS 1138-1992 | Thimbles for wire rope |
| AS 2089-1993 | Sheave blocks for lifting purposes |
| AS EN 12079.1-2010 | Offshore containers and associated lifting sets Offshore containers - Design, manufacture and marking (EN 12079-1:2006, MOD) |
| AS 1154.1-2009 | Insulator and conductor fittings for overhead power lines Performance, material, general requirements and dimensions (Reconfirmed 2019) |
| AS 3751-2005 | Underground mining - Slope haulage - Couplings, drawbars, and safety chains |
| AS 1418.1-2002 | Cranes, hoists and winches General requirements |
| AS 1085.2-2002 | Railway track material Fishplates (Reconfirmed 2013) |
| AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
| AS 1154.1-2004 | Insulator and conductor fittings for overhead power lines - Performance, material, general requirements and dimensions |
| AS 3777-2008 | Shank hooks and large eye hooks - Maximum 60 t (Reconfirmed 2019) |
| AS 1735.1-2003 | Lifts, escalators and moving walks General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.