• There are no items in your cart

AS 1565-1996

AvailableSuperseded

AvailableSuperseded

An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by SAI Global as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.

Copper and copper alloys - Ingots and castings (Reconfirmed 2020)

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

05-09-1996

€52.26
Excluding VAT

1 - AS 1565-1996 COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS
4 - PREFACE
5 - CONTENTS
6 - 1 SCOPE
6 - 2 REFERENCED DOCUMENTS
6 - 3 DEFINITION
6 - 3.1 Cast
7 - 4 DESIGNATION
7 - 5 MATERIALS
7 - 5.1 Chemical composition
7 - 5.2 Mechanical properties (optional)
7 - 5.3 Resistance to dezincification
8 - 5.4 Electrical resistivity (applicable to alloys C80100 and C81500)
8 - 5.5 Microstructure of castings (applicable to alloy C86500 only)
8 - 6 FREEDOM FROM DEFECTS
8 - 7 TEST PROCEDURES AND REQUIREMENTS
8 - 7.1 Mechanical tests
9 - 7.2 Electrical tests
9 - 8 ROUNDING OF TEST RESULT VALUES
9 - 8.1 General
9 - 8.2 Tensile test results
9 - 9 MARKING
9 - 9.1 Ingots
10 - 9.2 Castings
17 - APPENDIX A - PURCHASING GUIDELINES
17 - A1 GENERAL
17 - A2 INFORMATION TO BE SUPPLIED BY THE PURCHASER
17 - A3 PATTERNS, DRAWINGS AND SAMPLES OF THE CASTING
17 - A3.1 New patterns
18 - A3.2 Existing patterns and equipment
18 - A3.3 Sample casting or drawing
19 - A4 IDENTIFICATION
19 - A5 RECTIFICATION OF DEFECTS
19 - A5.1 General
19 - A5.2 Repair by welding
19 - A6 TEST REQUIREMENTS FOR CASTINGS
19 - A6.1 General
19 - A6.2 Frequency of testing
19 - A6.3 Mechanical tests on standard test bars
19 - A6.4 Additional test requirements for castings
19 - A6.5 Retests
19 - A6.6 Independent tests
21 - APPENDIX B - CODING SYSTEM WHEN ADDITIONAL INSPECTION IS REQUIRED FOR CASTINGS
21 - B1 GENERAL
21 - B2 INFORMATION TO BE INCLUDED IN THE TEST SCHEDULE
22 - B3 CODE A (ANALYSIS)
22 - B4 CODE T (MECHANICAL TESTS)
22 - B5 CODE M (MACHINING)
22 - B6 CODE P (PRESSURE TESTING)
22 - B6.1 Exclusions
22 - B6.2 Requirements
23 - B7 CODE F (PENETRANT FLAW DETECTION)
23 - B8 CODES R1 AND R2 (RADIOGRAPHIC EXAMINATION)
23 - B8.1 Marking of test regions
23 - B8.2 Grades
23 - B8.3 Repairs
23 - B8.4 Approval
23 - B9 CODE C (ELECTRICAL CONDUCTIVITY TESTING)
24 - APPENDIX C - RELATED COMPOSITION SPECIFICATIONS
25 - APPENDIX D - COLOUR CODE FOR INGOTS
26 - APPENDIX E - SHAPES OF STANDARD TEST BARS
26 - E1 BNF ‘CAST TO SHAPE’ TEST SAMPLE
27 - E2 SAND-CAST TEST SAMPLE
27 - E3 CHILL-CAST TEST BARS
28 - APPENDIX F - A GUIDE TO ALLOY SELECTION
28 - F1 INTRODUCTION
28 - F2 CORROSION RESISTANCE
28 - F2.1 Atmospheric corrosion
28 - F2.2 Corrosion by water
29 - F2.3 Resistance to chemical attack
30 - F3 WEAR RESISTANCE (BEARINGS AND GEARS)
30 - F3.1 General
30 - F3.2 Working load
30 - F3.3 Hardness and material of shaft or mating gear
31 - F3.4 Surface speed at the bearing face
31 - F3.5 Lubrication
31 - F3.6 Working temperature with consideration of peak temperature
31 - F3.7 Abrasive material
31 - F3.8 Recommendations
32 - F4 SERVICE AT ELEVATED TEMPERATURES (INCLUDING SUPERHEATED STEAM)
32 - F4.1 General
32 - F4.2 Resistance to superheated steam
32 - F4.3 Resistance to oxidation
32 - F4.4 Load carrying capacity
32 - F5 PRESSURE TIGHTNESS

Specifies requirements for the manufacture and testing of high conductivity copper castings and copper alloy ingots and castings. Includes a coding system for when additional inspection is required, and also includes a guide to alloy selection.

Committee
MT/2
DocumentType
Standard
ISBN
0 7337 0624 X
Pages
29
ProductNote
Reconfirmed 04/12/2020.
This standard has been reconfirmed in Australia in 2020 and remains current in New Zealand. Reconfirmation Notice 04/12/2020
PublisherName
Standards Australia
Status
AvailableSuperseded
SupersededBy
Supersedes

This Standard specifies requirements for the manufacture and testing of high conductivity copper castings and copper alloy ingots and castings.NOTES:1 Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in Appendix A.2 Provision has been made for additional inspection requirements for castings which can be specified by a coding system (see Appendix B).

Originated as AS H13-1940 and AS H14-1940.
Previous edition AS 1565-1985.
Third edition 1996.

AS 2062-1997 Non-destructive testing - Penetrant testing of products and components
AS 3641.1-1999 Recommended practice for atomic emission spectrometric analysis Principles and techniques
AS 2883-2000 Analysis of metals - Procedures for the setting up, calibration and standardization of atomic emission spectrometers using arc/spark discharge
AS 2706-2003 Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018)
AS 1515.1-1994 Copper alloys Determination of lead in copper alloys (flame atomic absorption spectrometric method) (Reconfirmed 2016)
AS 2700-1996 Colour Standards for general purposes - Swatches
AS 2345-2006 Dezincification resistance of copper alloys
AS 2706-1984 Numerical values - Rounding and interpretation of limiting values
AS 2345-1992 Dezincification resistance of copper alloys
AS 1391-2007 Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017)
AS K208.1-1970 Methods for the analysis of unalloyed copper Method for the electrolytic determination of copper in unalloyed copper containing not less than 99.85 percent copper
AS 1391-1991 Methods for tensile testing of metals
AS 1816-1990 Metallic materials - Brinell hardness test
AS 2614-1998 Copper and copper alloys - Sampling for chemical and spectrochemical analysis, and physical testing (Reconfirmed 2016)
AS 2883-1986 Analysis of metals - Procedures for the setting up, calibration and standardization of atomic emission spectrometers using arc/spark discharge
AS 1696.1-1987 Copper Determination of phosphorus - Spectrophotometric method

AS 2419.3-2012 Fire hydrant installations Fire brigade booster connections
ATS 5200.016-2010 Technical Specification for plumbing and drainage products Cistern inlet valves
AS 2419.2-1991 Fire hydrant installations - Fire hydrant valves
AS 3517-2007 Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications (Reconfirmed 2018)
AS 1732-1997 Fusible plugs for boilers
AS 4087-2004 Metallic flanges for waterworks purposes
AS 4087-1993 Metallic flanges for waterworks purposes
ATS 5200.004-2005 Technical Specification for plumbing and drainage products Urinal flushing cisterns
AS 2345-1992 Dezincification resistance of copper alloys
AS 1357.1-2004 Valves primarily for use in heated water systems Protection valves
ATS 5200.042-2004 Technical Specification for plumbing and drainage products - Roll-grooved jointing systems
AS/NZS 2638.1:2011 Gate valves for waterworks purposes Metal seated (Reconfirmed 2022)
AS 2938-1993 Gears - Spur and helical - Guide to specification and rating
AS/NZS 2845.1:2010 Water supply - Backflow prevention devices Materials, design and performance requirements
AS 5200.037.2-2008 Plumbing and drainage products Flow controllers for use with heated or cold water systems (Reconfirmed 2016)
ATS 5200.490-2007 Technical Specification for plumbing and drainage products Cross-linked polyethylene/ aluminium/polyethylene-composite pipe systems for pressure applications (Reconfirmed 2018)
AS 2129-2000 Flanges for pipes, valves and fittings (Reconfirmed 2016)
AS/NZS 3499:2006 Water supply - Flexible hose assemblies (Reconfirmed 2016)
AS/NZS 1768:2007 Lightning protection
AS 3688-1994 Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors
AS 1768-1991 Lightning protection
AS 4312-2008 Atmospheric corrosivity zones in Australia
ATS 5200.020-2004 Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with mains supply
AS 1210-2010 Pressure vessels (Reconfirmed 2021)
AS 5830.1-2012 In-line ball valves for use in plumbing water supply systems Metal-bodied
AS 3517-1995 Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications
AS 4032.1-2005 Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements
AS 4312:2019 Atmospheric corrosivity zones in Australia
ATS 5200.468-2005 Technical Specification for plumbing and drainage products Hot water systems - Recirculation valves
AS 3688:2016 Water supply and gas systems - Metallic fittings and end connectors
AS 1172.2:2014 Sanitary plumbing products Flushing devices and cistern inlet and outlet valves
ATS 5200.017-2005 Technical Specification for plumbing and drainage products Cistern outlet valves
AS 1718-1992 Water supply - Copper alloy screw-down pattern taps - Specified by dimensions
ATS 5200.464-2004 Technical Specification for plumbing and drainage products - Hot water manual or sensor-activated pumping systems
AS 4032.2-2005 Water supply - Valves for the control of hot water supply temperatures Tempering valves and end-of-line temperature-actuated devices (Reconfirmed 2015)
AS 2419.2-1994 Fire hydrant installations Fire hydrant valves
AS 4793:2020 Mechanical tapping bands for waterworks purposes
AS/NZS 4998:2009 Bolted unrestrained mechanical couplings for waterworks purposes (Reconfirmed 2022)
AS 3718-1992 Water supply - Metal-bodied taps - Specified by performance
ATS 5200.425-2009 Technical Specification for plumbing and drainage products Water closet (WC) suite with integral odour control device (OCD) connected to sanitary plumbing and drainage system
AS 4747.2-2013 Meters for non-urban water supply Technical requirements for closed conduit meters fully charged
ATS 5200.476-2006 Technical Specification for plumbing and drainage products Heated water systems - Leak protection device
AS 1357.2-2005 Valves primarily for use in heated water systems Control valves (Reconfirmed 2015)
AS 1628-1999 Water supply - Metallic gate, globe and non-return valves (Reconfirmed 2015)
AS 4041-2006 Pressure piping (Reconfirmed 2016)
AS 4087-1996 Metallic flanges for waterworks purposes
ATS 5200.478-2006 Technical Specification for plumbing and drainage products Cross-linked polyethylene/Aluminium/Cross-linked polyethylene macro-composite pipe systems for pressure applications
AS/NZS 4793:2009 Mechanical tapping bands for waterworks purposes
AS 2475-2001 Threaded hose connection fittings for bituminous materials
ATS 5200.420-2005 Technical Specification for plumbing and drainage products Trap-priming valves
AS 4087:2011 Metallic flanges for waterworks purposes
ATS 5200.477-2006 Technical Specification for plumbing and drainage products Rainwater/mains supply changeover devices
AS 2638.2-1999 Sluice valves for waterworks purposes Resilient seated
ATS 5200.007-2004 Technical Specification for plumbing and drainage products - Water hammer arrestors
AS 4747.3-2013 Meters for non-urban water supply Technical requirements for open channel meters
AS 5081-2008 Hydraulically operated automatic control valves for waterworks purposes (Reconfirmed 2016)
ATS 5200.489-2009 Technical Specification for plumbing and drainage products Stainless steel flexible assemblies for plumbing applications
AS 4956-2008 Air valves for water supply
ATS 5200.037.1-2006
AS 2419.2-2009 Fire hydrant installations Fire hydrant valves
AS 1628-1994 Water supply - Copper alloy gate, globe and non-return valves
AS 4795.1-2011 Butterfly valves for waterworks purposes Wafer and lugged (Reconfirmed 2022)
AS 1910-1994 Water supply - Float control valves for use in hot and cold water
AS 4041-1992 Pressure piping
AS 4795-2002 Double-flanged butterfly valves for waterworks purposes
AS 2638-1991 Sluice valves for waterworks purposes
AS 4883-2008 Air valves for sewerage
AS 4883:2017 Air valves for sewerage
AS 2638.2-2006 Gate valves for waterworks purposes - Resilient seated
AS/NZS 3718:2005 Water supply - Tap ware (Reconfirmed 2016)
ATS 5200.021-2004 Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with break tank supply
AS 3952-1991 Water supply - DN 80 spring hydrant valve for general purposes
ATS 5200.467-2004 Technical Specification for plumbing and drainage products Rainwater tank connection valve
ATS 5200.482-2006 Technical Specification for plumbing and drainage products Soil waste dump fitting
ATS 5200.466-2004 Technical Specification for plumbing and drainage products - Rainwater tank connection devices
ATS 5200.472-2006 Technical Specification for plumbing and drainage products Heated water system recirculation device
AS 6401-2003 Knife-gate valves for waterworks purposes (Reconfirmed 2015)
AS 2638.1-2002 Gate valves for waterworks purposes Metal seated
AS 4775-2007 Emergency eyewash and shower equipment
AS 2129-1994 Flanges for pipes, valves and fittings
AS 4795-2006 Butterfly valves for waterworks purposes
AS/NZS 3718:2003 Water supply - Tap ware
AS 1910-2004 Water supply - Float control valves for use in hot and cold water (Reconfirmed 2016)
AS 4032.4:2014 Water supply - Valves for the control of heated water supply temperatures Thermostatically controlled taps for the control of heated water supply temperatures
ATS 5200.012-2005 Technical Specification for plumbing and drainage products In-line valves for use in plumbing water supply systems - Miscellaneous types metallic and non-metallic
ATS 5200.046-2005 Technical Specification for plumbing and drainage products Diversion systems - Wash down and first flush
ATS 4747.2-2008 Meters for non-urban water supply Specification for closed conduit meters fully charged
ATS 5200.016-2005 Technical Specification for plumbing and drainage products - Cistern inlet valves
AS 5612-2013 Butterfly valves for general purposes
AS 1210-1997 Pressure vessels
ATS 5200.475-2006 Technical Specification for plumbing and drainage products Heated Water Systems - Cold water recovery device
AS 4956:2017 Air valves for water supply
AS 1357.1-2009 Valves primarily for use in heated water systems Protection valves
ATS 5200.481-2006 Technical Specification for plumbing and drainage products Thermal switching valves
ATS 4747.3-2008 Meters for non-urban water supply Specifications for open channel meters
AS 2638.2-2002 Gate valves for waterworks purposes - Resilient seated
AS 3578-1993 Cast iron non-return valves for general purposes
AS 5200.007-2008 Plumbing and drainage products Metal-bodied water hammer arresters
AS 2638.1-1999 Sluice valves for waterworks purposes Metal seated
AS 2738-2000 Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018)
AS 2345-2006 Dezincification resistance of copper alloys
ATS 5200.052-2005 Metallic-bodied inlet pressure control valves greater than DN 50
AS 4795.2-2011 Butterfly valves for waterworks purposes Double flanged
AS/NZS 3718:1997 Water supply - Metal-bodied taps - Specified by performance
ATS 5200.479-2006 Flood stop safety valve
ATS 5200.030-2004 Technical Specification for plumbing and drainage products - Solenoid valves
AS 3688-2005 Water supply - Metallic fittings and end connectors
AS/NZS 1768(INT):2003 Lightning protection
ATS 5200.030-2007 Technical Specification for plumbing and drainage products Solenoid valves
AS 4794-2001 Non-return valves for waterworks purposes - Swing check and tilting disc (Reconfirmed 2015)
AS 5830.2-2012 In-line ball valves for use in plumbing water supply systems Plastics-bodied
AS 2419.3-1996 Fire hydrant installations - Fire brigade booster connections
ATS 5200.485-2006 Pressure compensating tank
ATS 5200.486-2008 Technical Specification for plumbing and drainage products Sprinklers for home applications

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.