AS 1577-1993
AvailableSuperseded
An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by SAI Global as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.
Scaffold planks
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
20-12-1993
Important note : Users cannot be edited or removed once added to your Multi user PDF.Specifies requirements for the manufacture and performance of scaffold planks excluding prefabricated platforms. Specific manufacturing requirements are given for solid timber, vertically laminated timber and metal scaffold planks. Includes test methods for stiffness, strength, sliding and slip.
| Committee |
BD-036
|
| DocumentType |
Standard
|
| ISBN |
0 7262 8588 9
|
| Pages |
25
|
| PublisherName |
Standards Australia
|
| Status |
AvailableSuperseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard specifies requirements for the design, manufacture and performance of scaffold planks. The Standard does not apply to prefabricated platforms (see AS 1576.3).NOTE: Alternative methods for determining compliance with this Standard are given in Appendix E.
First published in part as AS 1577-1974.
AS 1578 first published 1974.
AS 1577-1974 and AS 1578-1974 revised, amalgamated and designated AS 1577-1993.
| AS 1866:1997 | Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes (Reconfirmed 2020) |
| AS 3678-1990 | Structural steel - Hot-rolled plates, floorplates and slabs |
| AS 4100-1990 | Steel structures |
| AS 1665-1992 | Welding of aluminium structures |
| AS 3904.1-1987 | Quality management and quality system elements Guidelines |
| HB 18.44-1991 | Guidelines for third-party certification and accreditation - Guide 44: General rules for ISO or IEC international third-party certification schemes for products |
| AS 2878-1986 | Timber - Classification into strength groups |
| AS 3679.1-1990 | Structural steel - Hot-rolled bars and sections |
| AS O1-1964 | Glossary of terms used in timber Standards |
| AS 1874-1988 | Aluminium and aluminium alloys - Ingots and castings |
| AS/NZS 1080.1:1997 | Timber - Methods of Test Moisture content |
| AS 3900.1-1987 | Quality management and quality assurance Standards Guidelines for selection and use |
| AS/NZS 1594:2002 | Hot-rolled steel flat products (Reconfirmed 2016) |
| AS 1734-1986 | Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate |
| AS 1399-1990 | Guide to AS 1199 - Sampling procedures and tables for inspection by attributes |
| AS 1538-1988 | Cold-formed Steel Structures Code |
| AS/NZS 3679.1:1996 | Structural steel Hot-rolled bars and sections |
| AS 1866-1986 | Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes |
| AS 1444-1996 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties |
| AS 1650-1989 | Hot-dipped galvanized coatings on ferrous articles |
| AS 1749-1978 | Rules for mechanical stress grading of timber |
| AS 1328-1987 | Glued-laminated structural timber |
| AS 1728-1975 | Types of timber surfaces |
| AS 1397-1993 | Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated |
| AS 1594-1989 | |
| AS 1874-2000 | Aluminium and aluminium alloys - Ingots and castings (Reconfirmed 2018) |
| AS 1554.1-1985 | Structural steel welding (known as the SAA Structural Steel Welding Code) Welding of steel structures |
| AS 1748-1978 | Mechanically stress-graded timber |
| AS 1444-2007 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017) |
| AS/NZS 3678:1996 | Structural steel - Hot-rolled plates, floorplates and slabs |
| AS 1604-1997 | Timber - Preservative-treated - Sawn and round |
| AS/NZS 1748:2006 | Timber - Mechanically stress-graded for structural purposes |
| AS 1576.3-1991 | |
| AS 1250-1981 | The use of steel in structures (known as the SAA Steel Structures Code) |
| AS 1664-1979 | Rules for the use of aluminium in structures (known as the SAA Aluminium Structures Code) (incorporating Corrig.) |
| AS/NZS 1734:1997 | Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate (Reconfirmed 2020) |
| AS 1080.1-1972 | Methods of testing timber Moisture content |
| AS 1576.3 SUPP 1-1991 | Scaffolding Prefabricated and tube-and-coupler scaffolding - Metal tube-and-coupler scaffolding - Deemed to comply (Supplement to AS 1576.3-1991) |
| AS 4100-1998 | Steel structures (Reconfirmed 2016) |
| AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
| AS/NZS 1665:2004 | Welding of aluminium structures (Reconfirmed 2016) |
| AS 1397-2001 | Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated |
| SAA/SNZ HB62.2:1995 | Guidelines for erection of building steelwork Multi storey buildings and structures |
| AS/NZS 1576.1:2010 | Scaffolding General requirements |
| AS 1576.3 SUPP 1-1991 | Scaffolding Prefabricated and tube-and-coupler scaffolding - Metal tube-and-coupler scaffolding - Deemed to comply (Supplement to AS 1576.3-1991) |
| AS/NZS 1576.1:1995 | Scaffolding General requirements |
| AS/NZS 4994.1(INT):2004 | Temporary roof edge protection for housing and residential buildings General requirements |
| AS/NZS 4576:1995 | Guidelines for scaffolding |
| AS 1576.1-1991 | General requirements |
| AS/NZS 1576.6:2000 | Scaffolding Metal tube-and-coupler scaffolding - Deemed to comply with AS/NZS 1576.3 |
| AS 1576.4-1991 | Scaffolding Suspended scaffolding |
| AS/NZS 1576.4:2013 | Scaffolding Suspended scaffolding (Reconfirmed 2024) |
| AS 6001-1999 | Working platforms for housing construction |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.