AS 1597.2-2013
Current
The latest, up-to-date edition.
Precast reinforced concrete box culverts Large culverts (exceeding 1200 mm span or 1200 mm height and up to and including 4200 mm span and 4200 mm height)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
12-08-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.Sets out minimum requirements for the design, manufacture and installation of precast reinforced concrete rectangular box culverts for conveying water not under pressure, and for carrying roadway and railway loadings specified by the AS5100 series.
| Committee |
CE-026
|
| DocumentType |
Standard
|
| ISBN |
978 1 74342 554 1
|
| Pages |
62
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard sets out minimum requirements for the design, manufacture and installation of precast reinforced concrete rectangular box culverts for conveying water not under pressure, and for carrying roadway and railway loadings specified by the AS 5100 series.This Standard is applicable to the design of culverts in dry or intermittently wet conditions.NOTES: 1 For culverts to be designed for embankments that occasionally impound water, specialist design advice should be sought regarding the overall embankment stability.2 Culvert units, lids and base slabs manufactured in accordance with this Standard can be expected to achieve a design life of 100 years.3 Design requirements are based on the methods of limit state design, using theoretical strength and serviceability calculations. Alternatively, design by prototype testing in accordance with the general principles and requirements of the AS 5100 series or AS 3600 is acceptable.4 The testing procedure and test loads for prototype testing should demonstrate that the units tested satisfy the design loads and manufacturing requirements of this Standard.
First published as AS 1597.2-1996.
Second edition 2013.
| AS 1726-1993 | Geotechnical site investigations |
| AS 5100.2-2004 | Bridge design Design loads |
| AS 5100.5 SUPP 1-2008 | Bridge design Concrete - Commentary (Supplement to AS 5100.5 - 2004) |
| AS/NZS 1554.3:2008 | Structural steel welding Welding of reinforcing steel |
| AS 1289.5.5.1-1998 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the minimum and maximum dry density of a cohesionless material - Standard method (Reconfirmed 2016) |
| AS 1289.3.5.1-2006 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the soil particle density of a soil - Standard method |
| AS/NZS 4671:2001 | Steel reinforcing materials |
| AS/NZS ISO 9001:2008 | Quality management systems - Requirements |
| AS 5100.2 SUPP 1-2007 | Bridge design Design loads - Commentary (Supplement to AS 5100.2 - 2004) |
| AS 1012.1-1993 | Methods of testing concrete Sampling of fresh concrete |
| AS 1289.3.9.1-2002 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the cone liquid limit of a soil |
| HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
| AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
| AS 1289.3.3.2-2009 | Methods of testing soils for engineering purposes Soil classification tests - Calculation of the cone plasticity index of a soil (Reconfirmed 2022) |
| AS 1289.3.1.2-2009 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the liquid limit of a soil - One point Casagrande method (subsidiary method) (Reconfirmed 2017) |
| AS 5100.7-2004 | Bridge design Rating of existing bridges |
| AS 1289.3.3.1-2009 | Methods of testing soils for engineering purposes Soil classification tests - Calculation of the plasticity index of a soil (Reconfirmed 2022) |
| AS 1289.3.2.1-2009 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the plastic limit of a soil - Standard method (Reconfirmed 2022) |
| AS 3600 SUPP 1-1994 | Concrete structures - Commentary (Supplement to AS 3600-1994) |
| AS 1012.8.1-2000 | Methods of testing concrete Method for making and curing concrete - Compression and indirect tensile test specimens |
| AS 3582.2-2001 | Supplementary cementitious materials for use with portland and blended cement Slag - Ground granulated iron blast-furnace |
| AS 1289.3.8.1-2006 | Methods of testing soils for engineering purposes Soil classification tests - Dispersion - Determination of Emerson class number of a soil |
| AS 1289.3.6.1-2009 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the particle size distribution of a soil - Standard method of analysis by sieving (Reconfirmed 2022) |
| AS/NZS 3582.3:2002 | Supplementary cementitious materials for use with portland and blended cement Amorphous silica |
| AS 1289.5.6.1-1998 | Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Density index method for a cohesionless material (Reconfirmed 2016) |
| AS 1289.3.5.2-2002 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the soil particle density of combined soil fractions - Vacuum pycnometer method (Reconfirmed 2013) |
| AS 3582.1-1998 | Supplementary cementitious materials for use with portland and blended cement Fly ash |
| AS 1289.3.8.3-1997 | Methods of testing soils for engineering purposes Soil classification tests - Dispersion - Determination of pinhole dispersion classification of a soil |
| AS 1289.3.7.1-2002 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the sand equivalent of a soil using a power-operated shaker |
| AS 1289.5.4.1-2007 | Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio (Reconfirmed 2016) |
| AS 1289.3.1.1-2009 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the liquid limit of a soil - Four point Casagrande method (Reconfirmed 2017) |
| AS 1289.5.3.2-2004 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand pouring can, with or without a volume displacer (Reconfirmed 2016) |
| AS 1289.5.1.1-2003 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compactive effort |
| AS 1289.3.6.3-2003 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the particle size distribution of a soil - Standard method of fine analysis using a hydrometer |
| AS 1199.0-2003 | Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016) |
| AS 1289.3.9.2-2006 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the cone liquid limit of soil - One-point method |
| AS 1478.1-2000 | Chemical admixtures for concrete, mortar and grout Admixtures for concrete (Reconfirmed 2018) |
| AS 3972-2010 | General purpose and blended cements |
| AS 1289.3.4.1-2008 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the linear shrinkage of a soil - Standard method |
| AS 1012.20-1992 | Methods of testing concrete Determination of chloride and sulfate in hardened concrete and concrete aggregates |
| AS 1597.1-2010 | Precast reinforced concrete box culverts Small culverts (not exceeding 1200 mm span and 1200 mm height) |
| AS 5100.5-2004 | Bridge design Concrete |
| AS 1289.3.8.2-2008 | Methods of testing soils for engineering purposes Soil classification tests - Dispersion - Determination of the percent dispersion of a soil (Reconfirmed 2016) |
| AS 1289.5.3.5-1997 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method (Reconfirmed 2013) |
| AS 5100.7 SUPP 1-2006 | Bridge design Rating of existing bridges - Commentary (Supplement to AS 5100.7-2004) |
| AS 2758.1-1998 | Aggregates and rock for engineering purposes - Concrete aggregates |
| AS 1012.9-1999 | Methods of testing concrete Determination of the compressive strength of concrete specimens |
| AS 3600-2009 | Concrete structures |
| AS 1379-2007 | Specification and supply of concrete (Reconfirmed 2017) |
| AS 2304:2019 | Water storage tanks for fire protection systems |
| AS 5100.8:2017 | Bridge design Rehabilitation and strengthening of existing bridges |
| AS 5100.5:2017 | Bridge design Concrete |
| AS 5100.3:2017 | Bridge design Foundation and soil-supporting structures |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.