AS 1646-1992
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Elastomeric seals for waterworks purposes
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
23-05-2024
11-10-1993
Specifies performance and, where these are not appropriate, prescriptive requirements for seals, used in pipeline systems which convey aqueous liquids with temperatures of less than 50 degrees Celsius. The range of seal hardness is between 36 IRHD and 85 IRHD. The seals are manufactured from polychloroprene (CR), ethylene-propylene terpolymers (EPDM), polyisoprene rubber (IR), nitrile-butadiene rubber (NBR), natural rubber (NR), and styrene-butadiene rubber (SBR). Acceptance criteria are given for seals with defined imperfections. The appendices include alternative methods for the determination of the rate of compression stress relaxation and seal hardness.
Committee |
WS-010
|
DocumentType |
Standard
|
ISBN |
0 7262 7532 8
|
Pages |
20
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This Standard specifies requirements for elastomeric seals to be used in pipeline systems which convey aqueous liquids at temperatures of less than 50C. The Standard also specifies requirements for seals which incorporate root growth inhibitor and which are only intended for the conveyance of sewage or stormwater. The Standard does not specify the physical dimensions or hardness requirements.NOTES:1 Guidelines to purchasers on information to be specified at the time of the enquiry or order are given in Appendix A.2 When seals are intended for use where the likelihood of micro-organism attack is high, special precautions may need to be taken.
First published as AS A139-1964 (endorsement of BS 2494-1955 subject to Australian amendment).
Second edition 1972.
Revised and redesignated AS 1646-1974.
Second edition 1984.
Third edition 1987.
Fourth edition 1992.
AS 1683.23-1983 | Methods of test for rubber Rubber - Vulcanized - Determination of resistance to liquids |
AS 2193-1978 | Methods for calibration and grading of force-measuring systems of testing machines |
AS 1683.15.2-1990 | Methods of test for elastomers Durometer hardness (Reconfirmed 2018) |
AS 1683.13B-1976 | Methods of test for elastomers - Compression set of vulcanized rubber under constant deflection |
AS 1683.24-1984 | Methods of test for rubber Rubber - Vulcanized - Determination of resistance to ozone cracking - Static strain test |
AS 1291-1980 | Wooden and synthetic material folding rules |
AS 1683.11-1990 | Methods of test for elastomers Tension testing of vulcanized rubber |
AS 1683.15.1-1990 | Methods of test for elastomers International rubber hardness |
AS 3855(INT)-1990 | Suitability of plumbing products for contact with potable water |
AS 1631-1994 | Cast grey and ductile iron non-pressure pipes and fittings (Reconfirmed 2018) |
AS 4139-1993 | Fibre-reinforced concrete pipes and fittings |
AS 4087-1993 | Metallic flanges for waterworks purposes |
AS 4181-1999 | Stainless steel clamps for waterworks purposes |
AS 1741-1991 | Vitrified clay pipes and fittings with flexible joints - Sewer quality (Reconfirmed 2018) |
AS 4139-2003 | Fibre-reinforced concrete pipes and fittings (Reconfirmed 2018) |
AS/NZS 3500.1.2:1998 | National plumbing and drainage Water supply - Acceptable solutions |
AS/NZS 2179.2(INT):1998 | Specifications for rainwater goods, accessories and fasteners - PVC rainwater goods and accessories |
AS 1579-1993 | Arc welded steel pipes and fittings for water and waste water |
AS 3517-1995 | Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications |
AS/NZS 1260:1996 | PVC pipes and fittings for drain, waste and vent applications |
AS 2280-1991 | Ductile iron pressure pipes and fittings |
AS/NZS 3500.2.2:1996 | National plumbing and drainage Sanitary plumbing and drainage - Acceptable solutions |
AS/NZS 4765(INT):2000 | Modified PVC (PVC-M) pipes for pressure applications |
AS 4058-1992 | Precast concrete pipes (pressure and non-pressure) |
MP 52-2005 | Manual of authorization procedures for plumbing and drainage products |
AS/NZS 1477:1996 | PVC pipes and fittings for pressure applications |
AS/NZS 2544:1995 | Grey iron pressure fittings |
AS 4087-1996 | Metallic flanges for waterworks purposes |
AS 3500.1-1992 | National Plumbing and Drainage Code Water supply |
AS 2887-1993 | Plastic waste fittings |
AS 2638.2-1999 | Sluice valves for waterworks purposes Resilient seated |
MP 52-1997 | Manual of authorization procedures for plumbing and drainage products |
AS 1628-1994 | Water supply - Copper alloy gate, globe and non-return valves |
AS 2638-1991 | Sluice valves for waterworks purposes |
AS/NZS 1477:1999 | PVC pipes and fittings for pressure applications |
AS 3952-1991 | Water supply - DN 80 spring hydrant valve for general purposes |
AS 4198-1994 | Precast concrete access chambers for sewerage applications |
AS 3500.4-1994 | National Plumbing and Drainage Code Hot water supply systems |
AS/NZS 2280:1995 | Ductile iron pressure pipes and fittings |
AS/NZS 4327:1995 | Metal-banded flexible couplings for low-pressure applications (Reconfirmed 2020) |
AS 2638.1-1999 | Sluice valves for waterworks purposes Metal seated |
AS 1589-1994 | Copper and copper alloy waste fittings |
AS 1260.5-1993 | Unplasticized PVC (UPVC) pipes and fittings for sewerage applications - Pipes with structured walls |
AS/NZS 2280:1999 | Ductile iron pressure pipes and fittings |
AS 3495-1997 | Stainless steel non-pressure pipes and fittings (Reconfirmed 2018) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.