AS 1931.2-1996
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
High-voltage test techniques - Measuring systems
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
30-06-2017
01-01-1996
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Applies to complete measuring systems and to their components for the measurement of high-voltages and currents during tests with direct voltage, alternating voltage, lightning and switching impulse voltages and for tests with impulse currents. This Standard is identical with and has been reproduced from IEC 60-2:1994.
| Committee |
EL-007
|
| DocumentType |
Standard
|
| ISBN |
0 7337 0232 5
|
| Pages |
75
|
| PublisherName |
Standards Australia
|
| Status |
Withdrawn
|
| Supersedes |
This part of IEC 60 is applicable to complete Measuring Systems, and to their components, used for the measurement of high-voltages and currents during tests with direct voltage, alternating voltage, lightning and switching impulse voltages and for tests with impulse currents, or with combinations of them as specified in IEC 60-1.The limits on measurement uncertainties stated in this International Standard apply to test levels stated in IEC 71-1. The principles of this InternationalStandard apply also to higher levels but the uncertainty may be greater.This standard:- defines the terms used,- states the requirements which the Measuring Systems shall meet,- describes the methods for approving a Measuring System and checking its components,- describes the procedure by which the user will show that a Measuring System meets the requirements of this standard.
| Standards | Relationship |
| IEC 60060-2:1994 | Identical |
First published as AS 1931.2-1977.
Second edition 1996.
| AS 1852.321-1988 | International electrotechnical vocabulary - Instrument transformers |
| AS 3720-1989 | Measurement of power-frequency electric fields |
| AS 2886-1986 | Voltage measurement - Sphere-gap method (one sphere earthed) |
| AS 1824.1-1995 | Insulation co-ordination Definitions, principles and rules |
| AS 1852.303-1988 | International electrotechnical vocabulary - Electronic measuring instruments |
| AS 1931.1-1996 | High-voltage test techniques - General definitions and test requirements |
| AS 1852.302-1988 | International electrotechnical vocabulary - Electrical measuring instruments |
| AS/NZS 61008.1:2011 | Residual current operated circuit breakers without integral overcurrent protection for household and similar uses (RCCBs) General rules (IEC 61008-1, Ed. 3.0 (2010) MOD) |
| AS/NZS 3100:1997 | Approval and test specification - General requirements for electrical equipment |
| AS 3300-1996 | Approval and test specification - General requirements for household and similar electrical appliances |
| AS 61083.1-2006 | Instruments and software used for measurement in high-voltage impulse tests Requirements for instruments (Reconfirmed 2016) |
| AS 62271.100-2005 | High-voltage switchgear and controlgear High-voltage alternating current circuit-breakers (IEC 62271-100, Ed. 1.1 (2003) MOD) |
| AS/NZS 3599.2:1999 | Electric cables - Aerial bundled - Polymeric insulated - Voltages 6.35/11(12) kV and 12.7/22(24) kV Non-metallic screened |
| AS 4362.2-1996 | High-voltage test techniques for low-voltage equipment Test equipment |
| AS 61010.031-2004 | Safety requirements for electrical equipment for measurement, control and laboratory use Safety requirements for hand held probe assemblies for electrical measurement and test (IEC 61010-031:2002 MOD) |
| AS 1931.1-1996 | High-voltage test techniques - General definitions and test requirements |
| AS 60060.3-2008 | High-voltage test techniques Definitions and requirements for on-site testing |
| AS/NZS 1429.1:2006 | Electric cables - Polymeric insulated For working voltages 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV |
| AS/NZS 1660.3:1998 | Test methods for electric cables, cords and conductors Electrical tests (Reconfirmed 2017) |
| AS/NZS 60076.3:2008 | Power transformers Insulation levels, dielectric tests and external clearances in air (IEC 60076-3, Ed. 2 (2000) MOD) |
| AS/NZS 4871.1:2010 | Electrical equipment for mines and quarries General requirements |
| AS 2732-1984 | Guide to the lightning impulse and switching impulse testing of power transformers and reactors |
| AS 60270-2001 | High-voltage test techniques - Partial discharge measurements (Reconfirmed 2015) |
| AS/NZS 61009.1:1999 | Residual current operated circuit breakers with integral overcurrent protection for household and similar uses (RCBOs) General rules |
| AS/NZS 1802:2003 | Electric cables - Reeling and trailing - For underground coal mining purposes |
| AS 62271.100-2008 | High-voltage switchgear and controlgear High-voltage alternating-current circuit-breakers (IEC 62271-100, Ed. 1.2 (2006) MOD) |
| AS/NZS 61009.1:2004 | Residual current operated circuit breakers with integral overcurrent protection for household and similar uses (RCBOs) General rules (IEC 61009-1, Ed. 2.1 (2003) MOD) |
| AS 60214.1-2005 | Tap-changers Performance requirements and test methods |
| AS 2989-1992 | Electrical equipment for coal mines - Specific requirements for high voltage circuit-breakers and disconnectors |
| AS 60076.4-2006 | Power transformers Guide to the lightning impulse and switching impulse testing - Power transformers and reactors (Reconfirmed 2016) (Reconfirmed 2024) |
| AS/NZS 1802:2018 | Electric cables - Reeling and trailing - For underground coal mining |
| AS/NZS 3350.2.76:1998 | Safety of household and similar electrical appliances Particular requirements - Electric fence energizers |
| AS/NZS 1026:2004 | Electric cables - Impregnated paper insulated - For working voltages up to and including 19/33 (36) kV |
| AS/NZS 3100:2002 | Approval and test specification - General requirements for electrical equipment |
| AS/NZS 61009.1:2011 | Residual current operated circuit breakers with integral overcurrent protection for household and similar uses (RCBOs) General rules (IEC 61009-1, Ed. 3.0 (2010) MOD) |
| AS 3100-1994 | Approval and test specification - General requirements for electrical equipment |
| AS 60052-2005 | Voltage measurement by means of standard air gaps (Reconfirmed 2016) |
| AS 2374.3.0-1982 | Power transformers Insulation levels and dielectric tests - General requirements |
| AS/NZS 3100:2009 | |
| AS 1284.9-1993 | Electricity metering - Electronic watthour meters (Classes 0.2 S and 0.5 S) |
| AS 2897-1986 | Power capacitors - Shunt - Rated voltages above 660 v a.c. |
| AS/NZS 3439.1:2002 | Low-voltage switchgear and controlgear assemblies Type-tested and partially type tested assemblies (IEC 60439-1:1999 MOD) |
| AS/NZS 4871.1:2012 | Electrical equipment for mines and quarries General requirements |
| AS/NZS 1429.1:2000 | Electric cables - Polymeric insulated For working voltages 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV |
| AS/NZS 3947.1:2001 | Low-voltage switchgear and controlgear General rules |
| AS 60947.1-2004 | Low-voltage switchgear and controlgear General rules |
| AS/NZS 3129.1:1993 | Approval and test specification - Electric fence energizers Safety requirements for mains-operated electric fence energizers |
| AS/NZS 61008.1:2004 | Residual current operated circuit breakers without integral overcurrent protection for household and similar uses (RCCBs) General rules (IEC 61008-1, Ed. 2.1 (2002) MOD) |
| AS/NZS 4871.1:2002 | Electrical equipment for coal mines, for use underground General requirements |
| AS 1660.3-1993 | |
| AS/NZS 3835.1:2006 | Earth potential rise - Protection of telecommunications network users, personnel and plant Code of practice |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.