AS 2150:2020
Current
The latest, up-to-date edition.
Asphalt - A guide to good practice
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
11-09-2020
Important note : Users cannot be edited or removed once added to your Multi user PDF.This Standard sets out recommendations for the manufacture, supply and placing of hot mix and warm mix asphalt for use in pavements.
| Committee |
CE-006
|
| DocumentType |
Standard
|
| ISBN |
978 1 76072 965 3
|
| Pages |
45
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard sets out recommendations for the manufacture, supply and placing of asphalt, both hot mix and warm mix, for use in pavements, including the following:
(a) Materials in the asphalt.
(b) Asphalt properties.
(c) Asphalt mix design.
(d) Manufacturing, storage and delivery.
(e) Sampling and testing.
(f) Preparation of surfaces.
(g) Spreading.
(h) Compaction.
(i) Finished surface properties.
(j) Selection of type of asphalt.
This Standard includes typical composition and test properties for most common uses; however, this does not preclude the use of alternative components or mix properties to meet specific performance requirements.
This Standard does not include recommendations for cold mix asphalt prepared without heating or designed to be placed cold as maintenance patching material.
NOTE 1 Guidance on asphalt planning is given in Appendix A.
NOTE 2 Guidance on selection of types of asphalt is given in Appendix B.
NOTE 3 Guidance on principles of asphalt mix design is given in Appendix C.
Originated as AS 2150-1978 and AS 2734-1984.
Previous edition AS 2150-2005.
Fourth edition AS 2150:2020.
| AS/NZS 3582.1:2016 | Supplementary cementitious materials Fly ash |
| AS 3582.2:2016 | Supplementary cementitious materials Slag - Ground granulated blast-furnace |
| AS/NZS 2891.10:2015 | Methods of sampling and testing asphalt Moisture content of asphalt |
| AS/NZS 2891.7.1:2015 | Methods of sampling and testing asphalt Determination of maximum density of asphalt - Water displacement method |
| AS/NZS 2891.5:2015 | Methods of sampling and testing asphalt Compaction of asphalt by Marshall method and determination of stability and flow - Marshall procedure |
| AS 1141.12:2015 | Methods for sampling and testing aggregates Materials finer than 75 µm in aggregates (by washing) |
| AS/NZS 2891.9.3:2014 | Methods of sampling and testing asphalt Determination of bulk density of compacted asphalt - Mensuration method |
| AS/NZS 2891.9.2:2014 | Methods of sampling and testing asphalt Determination of bulk density of compacted asphalt - Presaturation method |
| AS/NZS 2891.9.1:2014 | Methods of sampling and testing asphalt Determination of bulk density of compacted asphalt - Waxing procedure |
| AS/NZS 2891.8:2014 | Methods of sampling and testing asphalt Voids and volumetric properties of compacted asphalt mixes |
| AS/NZS 2891.7.3:2014 | Methods of sampling and testing asphalt Determination of maximum density of asphalt - Methylated spirits displacement |
| AS/NZS 2891.2.2:2014 | Methods of sampling and testing asphalt Sample preparation - Compaction of asphalt test specimens using a gyratory compactor |
| AS/NZS 2891.11:2014 | Methods of sampling and testing asphalt Degree of particle coating |
| AS/NZS 1141.8:2014 | Methods for sampling and testing aggregates Water-soluble fraction of filler |
| AS/NZS 1141.17:2014 | Methods for sampling and testing aggregates Voids in dry compacted filler |
| AS 2008-2013 | Bitumen for pavements |
| AS/NZS 2891.3.1:2013 | Methods of sampling and testing asphalt Binder content and aggregate grading - Reflux method |
| AS/NZS 2891.3.2:2013 | Methods of sampling and testing asphalt Binder content and aggregate grading - Centrifugal extraction method |
| AS/NZS 2891.13.1:2013 | Methods of sampling and testing asphalt Determination of the resilient modulus of asphalt - Indirect tensile method |
| AS/NZS 2891.3.3:2013 | Methods of sampling and testing asphalt Binder content and aggregate grading - Pressure filter method |
| AS/NZS 2891.1.1:2013 | Methods of sampling and testing asphalt Sampling - Loose asphalt |
| AS 4489.2.1-1997 | Test methods for limes and limestones Fineness - Wet sieving (Reconfirmed 2016) |
| AS 1141.66-2012 | Methods for sampling and testing aggregates Methylene blue adsorption value of fine aggregate and mineral fillers |
| AS 1141.3.1-2012 | Methods for sampling and testing aggregates Sampling - Aggregates |
| AS 3972-2010 | General purpose and blended cements |
| AS 1672.1-1997 | Limes and limestones Limes for building |
| AS 1160-1996 | Bituminous emulsions for the construction and maintenance of pavements |
| AS 1141.5-2000 | Method for sampling and testing aggregates Particle density and water absorption of fine aggregate (Reconfirmed 2016) |
| AS 2758.5-2009 | Aggregates and rock for engineering purposes Coarse asphalt aggregates |
| AS 1141.11.1-2009 | Methods for sampling and testing aggregates Particle size distribution - Sieving method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.