AS 2345-2006
Current
Current
The latest, up-to-date edition.
Dezincification resistance of copper alloys
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English
Published date
13-06-2006
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Specifies procedures for determining the resistance of copper-base alloys containing zinc dezincification.
| Committee |
MT-014
|
| DocumentType |
Standard
|
| ISBN |
0 7337 7493 8
|
| Pages |
14
|
| ProductNote |
Reconfirmed 29/07/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 29/07/2016
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies procedures for determining the resistance of copper-base alloys containing zinc to the form of corrosion termed ‘dezincification’, in two steps as follows:(a) Alloys are categorized into two groups based on their chemical composition which is used to assess their susceptibility to dezincification.(b) Alloys assessed to be resistant to dezincification on the basis of chemical composition do not require testing. Alloys considered to be susceptible can be further evaluated by testing them under accelerated laboratory conditions after the completion of all manufacturing stages. Following this test and where the specified acceptance criteria are met, such alloys can also be regarded as resistant to dezincification.This Standard also specifies the acceptance criteria for the dezincification resistance of copper/zinc alloy components designed for use in contact with potable water or soils. Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in Appendix A.
Originated as AS 2345-1980.
Previous edition 1992.
Third edition 2006.
| AS 1565-1996 | Copper and copper alloys - Ingots and castings (Reconfirmed 2020) |
| AS/NZS 1567:1997 | Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021) |
| AS 2738-2000 | Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018) |
| AS 1566-1997 | Copper and copper alloys - Rolled flat products (Reconfirmed 2018) |
| MP 52-2005 | Manual of authorization procedures for plumbing and drainage products |
| AS 1631-1994 | Cast grey and ductile iron non-pressure pipes and fittings (Reconfirmed 2018) |
| AS 2419.3-2012 | Fire hydrant installations Fire brigade booster connections |
| ATS 5200.016-2010 | Technical Specification for plumbing and drainage products Cistern inlet valves |
| AS 5200.458-2008 | Plumbing and drainage products Universal plastic-bodied transition couplings |
| AS 3517-2007 | Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications (Reconfirmed 2018) |
| AS 1357.1-2004 | Valves primarily for use in heated water systems Protection valves |
| AS 4796:2016 | Water supply - Metal-bodied and plastic-bodied ball valves for property service connection |
| AS/NZS 2638.1:2011 | Gate valves for waterworks purposes Metal seated (Reconfirmed 2022) |
| AS/NZS 2845.1:2010 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS 5200.037.2-2008 | Plumbing and drainage products Flow controllers for use with heated or cold water systems (Reconfirmed 2016) |
| AS 3565.1-2004 | Meters for water supply Cold water meters |
| ATS 5200.490-2007 | Technical Specification for plumbing and drainage products Cross-linked polyethylene/ aluminium/polyethylene-composite pipe systems for pressure applications (Reconfirmed 2018) |
| AS/NZS 3499:2006 | Water supply - Flexible hose assemblies (Reconfirmed 2016) |
| AS 5830.1-2012 | In-line ball valves for use in plumbing water supply systems Metal-bodied |
| AS 3688:2016 | Water supply and gas systems - Metallic fittings and end connectors |
| AS 1172.2:2014 | Sanitary plumbing products Flushing devices and cistern inlet and outlet valves |
| AS 1308-1987 | Electric water heaters - Thermostats and thermal cutouts (Reconfirmed 2016) |
| AS 2419.2-1994 | Fire hydrant installations Fire hydrant valves |
| AS 4793:2020 | Mechanical tapping bands for waterworks purposes |
| AS/NZS 4998:2009 | Bolted unrestrained mechanical couplings for waterworks purposes (Reconfirmed 2022) |
| AS 4176.3-2010 | Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Fittings (ISO 21003-3:2008, MOD) |
| AS 1565-1996 | Copper and copper alloys - Ingots and castings (Reconfirmed 2020) |
| ATS 5200.425-2009 | Technical Specification for plumbing and drainage products Water closet (WC) suite with integral odour control device (OCD) connected to sanitary plumbing and drainage system |
| AS 3565.1-2010 | Meters for cold and heated drinking and non-drinking water supplies Technical requirements (Reconfirmed 2021) |
| AS 4747.2-2013 | Meters for non-urban water supply Technical requirements for closed conduit meters fully charged |
| AS 5082.2-2007 | Polybutylene (PB) plumbing pipe systems - Metric series Mechanical and fusion jointing systems (Reconfirmed 2017) |
| AS 1357.2-2005 | Valves primarily for use in heated water systems Control valves (Reconfirmed 2015) |
| AS 3565.2-2004 | Meters for water supply - Combination meters |
| AS 1628-1999 | Water supply - Metallic gate, globe and non-return valves (Reconfirmed 2015) |
| AS/NZS 4793:2009 | Mechanical tapping bands for waterworks purposes |
| AS/NZS 1567:1997 | Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021) |
| AS/NZS 3666.1:2002 | Air-handling and water systems of buildings - Microbial control Design, installation and commissioning |
| AS 4747.3-2013 | Meters for non-urban water supply Technical requirements for open channel meters |
| AS 5081-2008 | Hydraulically operated automatic control valves for waterworks purposes (Reconfirmed 2016) |
| ATS 5200.489-2009 | Technical Specification for plumbing and drainage products Stainless steel flexible assemblies for plumbing applications |
| AS/NZS 1568:1998 | Copper and copper alloys - Forging stock and forgings |
| AS 4956-2008 | Air valves for water supply |
| AS 2419.2-2009 | Fire hydrant installations Fire hydrant valves |
| AS 4795.1-2011 | Butterfly valves for waterworks purposes Wafer and lugged (Reconfirmed 2022) |
| AS 4176-1994 | Polyethylene/aluminium and cross-linked polyethylene/aluminium macro-composite pipe systems for pressure applications |
| AS 4883-2008 | Air valves for sewerage |
| AS 1361-1995 | Electric heat-exchange water heaters - For domestic applications (Reconfirmed 2016) |
| AS 4883:2017 | Air valves for sewerage |
| AS 2638.2-2006 | Gate valves for waterworks purposes Resilient seated |
| AS/NZS 3718:2005 | Water supply - Tap ware (Reconfirmed 2016) |
| ATS 5200.482-2006 | Technical Specification for plumbing and drainage products Soil waste dump fitting |
| AS/NZS 2280:2004 | Ductile iron pipes and fittings |
| ATS 5200.472-2006 | Technical Specification for plumbing and drainage products Heated water system recirculation device |
| AS 2698.3-1990 | Plastics pipes and fittings for irrigation and rural applications Mechanical joint fittings for use with polyethylene micro-irrigation pipes (Reconfirmed 2017) |
| AS/NZS 2642.3:1994 | Polybutylene pipe systems Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications |
| AS 4775-2007 | Emergency eyewash and shower equipment |
| AS 4795-2006 | Butterfly valves for waterworks purposes |
| AS 1910-2004 | Water supply - Float control valves for use in hot and cold water (Reconfirmed 2016) |
| AS 1172.2-1999 | Water closet (WC) pans of 6/3 L capacity or proven equivalent Cisterns |
| AS 2537-1994 | Mechanical jointing fittings for use with cross-linked polyethylene (PE-X) pipe for hot and cold water applications |
| AS 4032.4:2014 | Water supply - Valves for the control of heated water supply temperatures Thermostatically controlled taps for the control of heated water supply temperatures |
| AS/NZS 2280:2014 | Ductile iron pipes and fittings |
| ATS 4747.2-2008 | Meters for non-urban water supply Specification for closed conduit meters fully charged |
| AS 5612-2013 | Butterfly valves for general purposes |
| AS/NZS 2280:2020 | Ductile iron pipes and fittings |
| AS/NZS 2845.1:1998 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS/NZS 3497:1998 | Drinking water treatment units - Plumbing requirements |
| AS/NZS 5263.1.12:2019 | Gas appliances Gas pool heaters |
| ATS 5200.475-2006 | Technical Specification for plumbing and drainage products Heated Water Systems - Cold water recovery device |
| AS 4956:2017 | Air valves for water supply |
| AS 1357.1-2009 | Valves primarily for use in heated water systems Protection valves |
| ATS 5200.481-2006 | Technical Specification for plumbing and drainage products Thermal switching valves |
| ATS 4747.3-2008 | Meters for non-urban water supply Specifications for open channel meters |
| AS 3952-2002 | Water supply - Spring hydrant valve for waterworks purposes (Reconfirmed 2015) |
| AS 3578-1993 | Cast iron non-return valves for general purposes |
| AS 5200.007-2008 | Plumbing and drainage products Metal-bodied water hammer arresters |
| AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
| AS/NZS 4129:2008 | Fittings for polyethylene (PE) pipes for pressure applications |
| AS/NZS 3666.1:2011 | Air-handling and water systems of buildings - Microbial control Design, installation and commissioning |
| AS 4795.2-2011 | Butterfly valves for waterworks purposes Double flanged |
| ATS 5200.479-2006 | Flood stop safety valve |
| AS 3688-2005 | Water supply - Metallic fittings and end connectors |
| AS 1589-2001 | Copper and copper alloy waste fittings (Reconfirmed 2018) |
| ATS 5200.030-2007 | Technical Specification for plumbing and drainage products Solenoid valves |
| AS 5830.2-2012 | In-line ball valves for use in plumbing water supply systems Plastics-bodied |
| AS 2419.3-1996 | Fire hydrant installations - Fire brigade booster connections |
| ATS 5200.485-2006 | Pressure compensating tank |
| AS/NZS 2280:2012 | Ductile iron pipes and fittings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.