• There are no items in your cart

AS 2527-1997

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Cylinders for dissolved acetylene

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

01-08-2017

Superseded by

AS 2527-2006

Language(s)

English

Published date

01-01-1997

€57.40
Excluding VAT

1 - AS 2527-1997 CYLINDERS FOR DISSOLVED ACETYLENE
4 - PREFACE
5 - CONTENTS
6 - 1 SCOPE
6 - 2 DEFINITIONS
6 - 2.1 Cylinder manufacturer
6 - 2.2 Dissolved acetylene cylinder
6 - 2.3 Maximum acetylene charge
6 - 2.4 Tare mass
6 - 3 REFERENCED DOCUMENTS
6 - 4 CYLINDER SHELL
6 - 4.1 Shell specification
7 - 4.2 Test Pressure
7 - 4.3 Fitment of safety device
7 - 5 POROUS FILLER
7 - 5.1 Properties
7 - 5.2 Compatibility
7 - 5.3 Clearance
7 - 6 SOLVENT
7 - 7 TYPE TESTS
7 - 7.1 Type testing
8 - 7.2 Ullage test (at elevated temperature)
8 - 7.3 Performance under backfire
8 - 7.4 Performance under simulated external fire condition
8 - 8 RECORD OF DATA
8 - 9 MARKING
10 - APPENDIX A - LIST OF REFERENCED DOCUMENTS
12 - APPENDIX B - SELECTION AND NUMBERS OF CYLINDERS FOR TESTING
12 - B1 GENERAL
12 - B2 CYLINDER SELECTION
12 - B3 NUMBER OF CYLINDERS FOR EACH TEST
13 - APPENDIX C - ULLAGE TEST AT ELEVATED TEMPERATURES
13 - C1 SCOPE
13 - C2 APPARATUS
13 - C3 TEST SPECIMEN
13 - C4 PROCEDURE
13 - C5 REPORT
14 - APPENDIX D - PERFORMANCE UNDER BACKFIRE
14 - D1 SCOPE
14 - D2 APPARATUS
14 - D3 TEST SPECIMEN
14 - D4 PROCEDURE
15 - D5 REPORT
18 - APPENDIX E - PERFORMANCE UNDER SIMULATED EXTERNAL FIRE CONDITION
18 - E1 SCOPE
18 - E2 APPARATUS
18 - E3 TEST SPECIMEN
18 - E4 CALIBRATION
19 - E5 PROCEDURE
19 - E6 REPORT
21 - APPENDIX F - METHOD FOR DETERMINATION OF POROSITY OF FILLER MATERIAL
21 - F1 SCOPE
21 - F2 APPARATUS
21 - F3 TEST SPECIMEN
21 - F4 PROCEDURE
21 - F5 CALCULATION
22 - F6 REPORT

Specifies the basic requirements for steel cylinders of 5 kg to 160 kg water capacity intended for the storage and transport of acetylene. Also specifies requirements for the porous filler, the solvent and the cylinder marking. Revisions to the 1982 edition include deletion of Annexes 1 and 2 (as they refer to obsolete Standards), together with the introduction of seamless-steel cylinders as suitable shells for acetylene gas use.

Committee
ME-002
DocumentType
Standard
ISBN
0 7337 1095 6
Pages
17
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

This Standard specifies the basic requirements for steel cylinders of 5 kg to 160 kg water capacity intended for the storage and transport of dissolved acetylene. Requirements for the porous filler, the solvent, and the cylinder marking are also specified.NOTE: AS 2030.2 specifies requirements for the filling, inspection and maintenance of cylinders for compressed acetylene dissolved in a solvent.

First published as AS B189-1962.
AS CB4 Intp6 first published 1973.
AS B189-1962 and AS CB4 Intp6-1973 revised, amalgmated and redesignated AS 2527-1982.
Second edition 1997.

AS 2469-1998 Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 35 kg
AS B10-1950 High carbon steel cylinders for the storage and transport of permanent gases
AS 3577-1999 Steel cylinders for compressed gases - Welded - 150 kg to 500 kg
AS B12-1952 Low carbon steel cylinders for the storage and transport of medium pressure liquefiable gases
AS B110-1952 Manganese steel cylinders for the storage and transport of permanent gases
AS 2030.2-1996 The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gases Cylinders for dissolved acetylene
AS B111-1952 Manganese steel cylinders for the storage and transport of high pressure liquefiable gases
AS B189-1962 Welded capsule type steel for the storage and transport of compressed acetylene dissolved in acetone
AS B13-1953 Low carbon steel cylinders for the storage and transport of compressed acetylene dissolved in acetone
AS 2613-1989 Safety devices for gas cylinders
AS B239-1970 Welded steel cylinders for compressed gases of capacity over 10 litres (approx. 22 lb of water) up to and including 130 litres (approx. 286 lb of water)
AS 2873-1986 Carbon-manganese steel cylinders for compressed gases - Seamless - 0.1 kg to 500 kg
AS B115-1966 Welded or brazed steel cylinders for compressed gases
AS 2470-1998 Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg
AS B11-1950 High carbon steel cylinders for the storage and transport of high pressure liquefiable gases
AS 2874-1986 High tensile carbon-manganese steel cylinders for compressed gases - Seamless - 0.1 kg to 500 kg
AS 2875-1995 Alloy steel cylinders for compressed gases - Seamless - 0.1 kg to 500 kg
AS B113-1960 High tensile carbon-manganese steel cylinders for the storage and transport of permanent gases and high pressure liquefiable gases
AS 2030.1-1999 The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Cylinders for compressed gases other than acetylene
AS B114-1960 Alloy steel cylinders for the storage and transport of permanent gases and high pressure liquefiable gases

AS 2613-2005 Safety devices for gas cylinders (Reconfirmed 2016)
AS 2030.2-1996 The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gases Cylinders for dissolved acetylene

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.