Skip to content
Please enter a keyword to search
  • Preview

    AS 2703-2008

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Vehicle loop detector sensors

    Available format(s):  Hardcopy, PDF 1 User, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Superseded date:  12-12-2022

    Language(s):  English

    Published date:  17-12-2008

    Publisher:  Standards Australia

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Specifies requirements for the design, construction and performance of electronic sensing equipment used in traffic control and counting systems for the detection of vehicles. It applies primarily to detector sensors of the permanently installed type associated with road traffic signal installations.

    Scope - (Show below) - (Hide below)

    This Standard specifies requirements for the design, construction and performance of vehicle loop detectors. These detectors may also be designed to operate with trams/light rail. The type of detectors covered in this Standard are independent, rack-mounted and integrated vehicle loop detectors.NOTE: See Appendix D for the information which should be supplied with an enquiry or order for vehicle loop detectors to this Standard.

    General Product Information - (Show below) - (Hide below)

    Committee LG-006
    Document Type Standard
    Product Note Pending Revision indicates that as a result of the Aged Standards review process, the document needs updating. If no project proposal, meeting the quality criteria, is received within the 12 month timeframe, the document shall be withdrawn.
    Publisher Standards Australia
    Status Superseded
    Superseded By
    Supersedes

    History - (Show below) - (Hide below)

    Originated as AS 2703-1984.Previous edition 1987.Third edition 2008. Originated as AS 2703-1984. Previous edition 1987. Third edition 2008.

    Standards Referenced By This Book - (Show below) - (Hide below)

    AS/NZS 61000.2.2:2003 Electromagnetic compatibility (EMC) Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems (Reconfirmed 2013)
    AS/NZS 61558.2.6:2001 Safety of power transformers, power supply units and similar Particular requirements for safety isolating transformers for general use (IEC 61558-2-6:1997, MOD)
    AS/NZS 61000.4.2:2002 Electromagnetic compatibility (EMC) Testing and measurement techniques - Electrostatic discharge immunity test
    AS/NZS 61000.4.3:2006 Electromagnetic compatibility (EMC) Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
    AS 1199.4-2003 Sampling procedures for inspection by attributes Procedures for assessment of declared quality levels (Reconfirmed 2016)
    AS/NZS 61000.2.3:1999 Electromagnetic compatibility (EMC) Environment - Description of the environment - Radiated and non-network-frequency-related conducted phenomena (Reconfirmed 2016)
    AS/NZS 61558.2.8:2001 Safety of power transformers, power supply units and similar Particular requirements for bell and chime transformers (IEC 61558-2-8:1998, IDT)
    AS/NZS 61558.2.15:2001 Safety of power transformers, power supply units and similar Particular requirements for isolating transformers for the supply of medical locations (IEC 61558-2-15:1999, MOD)
    AS/NZS 61000.2.5:1999 Electromagnetic compatibility (EMC) Environment - Classification of electromagnetic environments (Reconfirmed 2016)
    AS/NZS 61000.4.34:2007 Electromagnetic compatibility (EMC) Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase (IEC 61000-4-34, Ed. 1.0 (2005) MOD)
    AS/NZS 61000.4.5:2006 Electromagnetic compatibility (EMC) Testing and measurement techniques - Surge immunity test
    AS/NZS CISPR 14.1:2003 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Emission
    AS/NZS 61000.6.3:2007 Electromagnetic compatibility (EMC) Generic standards - Emission standard for residential, commercial and light-industrial environments
    AS/NZS 60320.1:2004 Appliance couplers for household and similar general purposes General requirements (IEC 60320-1, Ed. 2.0 (2001) MOD)
    AS/NZS 3100:2002 Approval and test specification - General requirements for electrical equipment
    AS/NZS 61000.6.4:2007 Electromagnetic compatibility (EMC) Generic standards - Emission standard for industrial environments
    AS/NZS 61000.6.1:2006 Electromagnetic compatibility (EMC) Generic standards - Immunity for residential, commercial and light industrial environments (Reconfirmed 2016)
    AS/NZS 61000.3.5:1998 Electromagnetic compatibility (EMC) Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A
    AS/NZS 61558.2.4:2001 Safety of power transformers, power supply units and similar Particular requirements for isolating transformers for general use (IEC 61558-2-4:1997, MOD)
    AS/NZS 61000.4.4:2006 Electromagnetic compatibility (EMC) Testing and measurement techniques - Electrical fast transient/burst immunity test
    AS 1199.3-2003 Sampling procedures for inspection by attributes Skip-lot sampling procedures (Reconfirmed 2016)
    AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)
    AS/NZS 61000.1.1:2000 Electromagnetic compatibility (EMC) General - Application and interpretation of fundamental definitions and terms (Reconfirmed 2016)
    AS/NZS 61000.3.7:2001 Electromagnetic compatibility (EMC) Limits - Assessment of emission limits for fluctuating loads in MV and HV power systems (IEC 61000-3-7:1996, MOD)
    AS/NZS 61000.6.2:2006 Electromagnetic compatibility (EMC) General standards - Immunity for industrial environments (Reconfirmed 2016)
    AS/NZS 3191:2008 Electric flexible cords (Reconfirmed 2019)
    AS/NZS 61000.4.15:2005 Electromagnetic compatibility (EMC) Testing and measurement techniques - Flickermeter - Function and design specifications
    AS/NZS 61558.2.5:2003 Safety of power transformers, power supply units and similar Particular requirements for shaver transformers (IEC 61558-2-5:1997, MOD)
    AS/NZS 61558.2.3:2001 Safety of power transformers, power supply units and similar devices Particular requirements for ignition transformers for gas and oil burners (IEC 61558-2-3:1999, IDT)
    AS 1199.1-2003 Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
    AS/NZS 61558.2.17:2001 Safety of power transformers, power supply units and similar Particular requirements for transformers for switch mode power supplies (IEC 61558-2-17:1997, MOD)
    AS/NZS 61000.4.27:2006 Electromagnetic compatibility (EMC) Testing and measurement techniques - Unbalance, immunity test
    AS/NZS 61000.4.16:2002 Electromagnetic compatibility (EMC) Testing and measurement techniques - Test for immunity to conducted common mode disturbances in the frequency range 0 Hz to 150 kHz (Reconfirmed 2013)
    AS 1199.2-2003 Sampling procedures for inspection by attributes Sampling plans indexed by limiting quality (LQ) for isolated lot inspection (Reconfirmed 2016)
    AS/NZS 61558.1:2000 Safety of power transformers, power supply units and similar General requirements and tests (IEC 61558-1 Ed 1.1, MOD)
    AS/NZS 61000.4.30:2007 Electromagnetic compatibility (EMC) Testing and measurement techniques - Power quality measurement methods
    AS/NZS 61000.2.12:2003 Electromagnetic compatibility (EMC) Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems (Reconfirmed 2013)
    AS/NZS 2276.2:1998 Cables for traffic signal installations Feeder cable for vehicle detectors
    AS/NZS 61000.3.3:2006 Electromagnetic compatibility (EMC) Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current per phase and not subject to conditional connection
    AS/NZS 61000.4.6:2006 Electromagnetic compatibility (EMC) Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
    AS/NZS 61000.3.4:2007 Electromagnetic compatibility (EMC) Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 75 A (Reconfirmed 2018)
    AS/NZS 61000.4.11:2005 Electromagnetic compatibility (EMC) Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11, Ed. 2.0 (2004) MOD) (Reconfirmed 2016)
    AS/NZS 61000.3.12:2006 Electromagnetic compatibility (EMC) Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current greater than 16 A and less than or equal to 75 A per phase
    AS/NZS 61558.2.9:2003 Safety of power transformers, power supply units and similar products Particular requirements for transformers for class III handlamps for tungsten filament lamps (IEC 61558-2-9:2002, MOD)
    AS/NZS 61000.4.8:2002 Electromagnetic compatibility (EMC) Testing and measurement techniques - Power frequency magnetic field immunity test
    AS/NZS 61558.2.23:2001 Safety of power transformers, power supply units and similar devices Particular requirements for transformers for construction sites (IEC 61558-2-23:2000, MOD)
    AS/NZS 61000.3.11:2002 Electromagnetic compatibility (EMC) Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current less than or equal to 75 A and subject to conditional connection (Reconfirmed 2013)
    AS 1199.0-2003 Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016)
    AS/NZS 61000.4.7:2007 Electromagnetic compatibility (EMC) Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
    AS 2578.1-1983 Traffic signal controllers - Physical and electrical compatibility
    AS/NZS 61000.4.14:2007 Electromagnetic compatibility (EMC) Testing and measurement techniques - Voltage fluctuation immunity test
    AS/NZS 61558.2.7:2008 Safety of power transformers, power supplies, reactors and similar products Particular requirements and tests for transformers and power supplies for toys (Reconfirmed 2020)
    AS/NZS 61558.1:2008 Safety of Power Transformers, Power Supplies, Reactors and Similar Products General requirements and tests (IEC 61558-1 Ed 2, MOD)
    AS/NZS 61000.3.6:2001 Electromagnetic compatibility (EMC) Limits - Assessment of emission limits for distorting loads in MV and HV power systems (IEC 61000-3-6:1996, MOD)
    AS/NZS 61000.4.13:2006 Electromagnetic compatibility (EMC) Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
    AS/NZS 61000.4.1:2006 Electromagnetic compatibility (EMC) Testing and measurement techniques - Overview of IEC 61000-4 series
    AS/NZS 61000.3.2:2007 Electromagnetic compatibility (EMC) Limits - Limits for harmonic current emissions (equipment input current (16 A per phase) (IEC 61000-3-2, Ed. 3.0 (2005) MOD)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective