AS 2854-2004
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Tinplate cans for general use
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
30-06-2017
English
01-01-2004
Important note : Users cannot be edited or removed once added to your Multi user PDF.Specifies structural and performance requirements for two- and three-piece tinplate cans for general use. Nominal dimensions and capacities are given for a range of stock size cans up to a maximum nominal diameter or cross-section of 230 mm.
| Committee |
PK-028
|
| DocumentType |
Standard
|
| ISBN |
0 7337 6256 5
|
| Pages |
25
|
| PublisherName |
Standards Australia
|
| Status |
Withdrawn
|
| Supersedes |
This Standard specifies structural and performance requirements for a range of tinplate cans for general use and having a maximum nominal diameter or cross-section of 230 mm. These cans have re-closable sealing systems, comprising friction closure cans and non-removable top cans with screw thread closures.Nominal capacities, gross lidded capacities and dimensions are specified for a range of stock size cans. Recommendations for non-stock size cans are also provided. NOTE: Additional information that may be required by the purchaser or the manufacturer is given in Appendix A.This Standard describes specifications and type-testing only. Relevant parties should decide upon acceptable quality levels (AQLs) based on AS 1199.1.
First published as AS 1524-1975 and AS 1525-1975.
Revised and redesignated as AS 2854-1986.
Second edition 2004.
| AS 2582.4-2003 | Complete, filled transport packages - Methods of test Vertical impact test by dropping (Reconfirmed 2020) |
| AS 1517-1991 | Tinplate and blackplate |
| AS 2582.8-2003 | Complete, filled transport packages - Methods of test Internal hydraulic pressure test (Reconfirmed 2020) |
| AS 2400.1-1995 | Packaging Glossary of packaging terms (Reconfirmed 2016) |
| AS 2582.9-2003 | Complete, filled transport packages - Methods of test Leakage test (Reconfirmed 2020) |
| AS 2582.3-2003 | Complete, filled transport packages - Methods of test Stacking tests using a static load (Reconfirmed 2020) |
| AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
| AS 3730.29-2006 | Guide to the properties of paints for buildings Solvent-borne - Exterior/interior - Paving paint (Reconfirmed 2016) |
| AS 3730.21-2006 | Guide to the properties of paints for buildings Primer - Solvent-borne - For ferrous metallic surfaces |
| AS/NZS 3750.8:1994 | Paints for steel structures Vinyl paints - Primer, high-build and gloss (Reconfirmed 2013) |
| AS 3730.3-2006 | Guide to the properties of paints for buildings Latex - Interior - Low gloss (Reconfirmed 2016) |
| AS/NZS 3750.9:1994 | Paints for steel structures - Organic zinc-rich primer |
| AS 3730.2-2006 | Guide to the properties of paints for buildings Latex - Interior - Semi-gloss (Reconfirmed 2016) |
| AS 4025.2-1993 | Paints for equipment including ships Solvent-borne - Interior and exterior - Undercoat |
| AS 3730.9-2006 | Guide to the properties of paints for buildings Latex - Exterior - Semi-gloss |
| AS/NZS 3750.11:2009 | Paints for steel structures Chlorinated rubber - High-build and gloss |
| AS 3730.5-2006 | Guide to the properties of paints forbuildings Solvent-borne - Interior - Semi-gloss (Reconfirmed 2016) |
| AS/NZS 2009:2006 | Glass beads for pavement-marking materials (Reconfirmed 2016) |
| AS 3730.7-2006 | Guide to the properties of paints for buildings Latex - Exterior - Flat |
| AS 3730.11-1991 | Guide to the properties of paints for buildings Solvent-borne - Interior - Full gloss enamel |
| AS 3750.2-1994 | Paints for steel structures - Ultra high-build paint |
| AS 1580.203.1-2004 | Paints and related materials - Methods of test Skin formation |
| AS/NZS 1580.214.1:1997 | Paints and related materials - Methods of test Consistency - Stormer viscometer (Reconfirmed 2013) |
| AS/NZS 3750.23:2008 | Paints for steel structures Semi-gloss enamel - Solvent-borne (Reconfirmed 2021) |
| AS/NZS 3750.7:2009 | Paints for steel structures Aluminium paint (Reconfirmed 2021) |
| AS 3730.15-2006 | Guide to the properties of paints for buildings Primer - Latex - For metallic zinc surfaces |
| AS 3730.13-2006 | Guide to the properties of paints for buildings Primer - Wood - Solvent-borne - Interior/exterior (Reconfirmed 2016) |
| AS/NZS 3750.22:2008 | Paints for steel structures Full gloss enamel - Solvent-borne (Reconfirmed 2021) |
| AS/NZS 3750.6:2009 | Paints for steel structures Full gloss polyurethane (two-pack) (Reconfirmed 2020) |
| AS 3730.28-2006 | Guide to the properties of paints for buildings Wood stain - Solvent-borne - Exterior |
| AS 4025.3-1993 | Paints for equipment including ships Solvent-borne - Interior and exterior - Semi-gloss enamel |
| AS 3730.26-1993 | Guide to the properties of paints for buildings Floor varnish - Moisture cured |
| AS/NZS 3750.11:1996 | Paints for steel structures - Chlorinated rubber - High-build and gloss |
| AS/NZS 3750.9:2009 | Paints for steel structures Organic zinc-rich primer (Reconfirmed 2019) |
| AS/NZS 3750.4:1994 | Paints for steel structures Bitumen paint (Reconfirmed 2013) |
| AS 3730.6-2006 | Guide to the properties of paints for buildings Solvent-borne - Interior/exterior - Full gloss enamel (Reconfirmed 2016) |
| AS 3730.16-2006 | Guide to the properties of paints for buildings Latex - Self-priming timber finish - Exterior |
| AS/NZS 3750.3:2008 | Paints for steel structures Heat resisting - Exterior (Reconfirmed 2020) |
| AS 3730.17-2006 | Guide to the properties of paints for buildings Primer - Wood - Latex - Interior/exterior (Reconfirmed 2016) |
| AS/NZS 3750.3:1994 | Paints for steel structures - Heat resisting - Exterior |
| AS 3730.14-2006 | Guide to the properties of paints for buildings Undercoat - Solvent-borne - Interior/exterior |
| AS 1580.102.1-2002 | Paints and related materials - Methods of test Sampling procedure |
| AS 4049.3-2005 | Paints and related materials - Pavement marking materials Waterborne paint - For use with surface applied glass beads (Reconfirmed 2016) |
| AS 4025.1-1992 | Paints for equipment including ships Solvent-borne - Interior and exterior - Full gloss enamel |
| AS 3750.10-2008 | Paints for steel structures Full gloss epoxy (two-pack) (Reconfirmed 2019) |
| AS 3730.18-2006 | Guide to the properties of paints for buildings Undercoat/sealer - Latex - Interior/exterior |
| AS/NZS 3750.12:1996 | Paints for steel structures Alkyd/micaceous iron oxide (Reconfirmed 2013) |
| AS 3730.12-2006 | Guide to the properties of paints for buildings Latex - Interior - Gloss |
| AS/NZS 3750.1:2008 | Paints for steel structures Epoxy mastic (two-pack) - For rusted steel (Reconfirmed 2020) |
| AS 2216-1997 | Packaging for poisonous substances |
| AS 3730.1-2006 | Guide to the properties of paints for buildings Latex - Interior - Flat (Reconfirmed 2016) |
| AS 3730.22-2006 | Guide to the properties of paints for buildings Concrete and masonry sealer - Solvent-borne - Interior/exterior |
| AS 3730.22-2006 | Guide to the properties of paints for buildings Concrete and masonry sealer - Solvent-borne - Interior/exterior |
| AS/NZS 3750.5:2008 | Paints for steel structures Acrylic full gloss (two-pack) (Reconfirmed 2020) |
| AS/NZS 3750.7:1994 | Paints for steel structures - Aluminium paint |
| AS 3730.27-2006 | Guide to the properties of paints for buildings Clear coatings for interior timber floors |
| AS/NZS 3750.20:2008 | Paints for steel structures Anticorrosive metal primer - Solvent-borne - Lead and chromate free (Reconfirmed 2020) |
| AS 3750.1-1994 | Paints for steel structures - Epoxy mastic (two-pack) - For rusted steel |
| AS/NZS 3750.21:2008 | Paints for steel structures Undercoat - Solvent-borne (Reconfirmed 2021) |
| AS 3730.10-2006 | Guide to the properties of paints for buildings Latex - Exterior - Gloss (Reconfirmed 2016) |
| AS 3730.8-2006 | Guide to the properties of paints for buildings Latex - Exterior - Low-gloss (Reconfirmed 2016) |
| AS 4049.1-2005 | Paints and related materials - Pavement marking materials Solvent-borne paint - For use with surface applied glass beads (Reconfirmed 2016) |
| AS/NZS 3750.5:1994 | Paints for steel structures - Acrylic full gloss (two-pack) |
| AS/NZS 3750.10:1994 | Paints for steel structures Full gloss epoxy (two-pack) |
| AS/NZS 3750.2:2008 | Paints for steel structures Ultra high-build paint (Reconfirmed 2020) |
| AS/NZS 3750.19:2008 | Paints for steel structures Metal primer - General purpose (Reconfirmed 2020) |
| AS 4089-1993 | Priming paint for steel - Single component - General purpose |
| AS 4025.4-1994 | Paints for equipment including ships Solvent-borne - Lead and chromate free - Anticorrosive metal primer |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.