AS 2905-2005
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Steel drums
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
30-06-2017
Language(s)
English
Published date
01-01-2005
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.Provides structural and performance requirements, dimensions and capacities for a range of steel drums having a minimum nominal diameter of 220 mm and a maximum nominal capacity of 250 L.
| Committee |
PK-001
|
| DocumentType |
Standard
|
| ISBN |
0 7337 6949 7
|
| Pages |
22
|
| ProductNote |
Withdrawn 14-04-2017.
|
| PublisherName |
Standards Australia
|
| Status |
Withdrawn
|
| Supersedes |
This Standard specifies stock sizes and performance requirements for steel drums having a nominal base diameter of 220mm or greater, and a maximum nominal capacity of 250L. It describes both open-head drums and closed-head drums.For the purpose of this Standard, the term ‘drum’ also includes containers commonly referred to as ‘pails’.This Standard describes specifications and type-testing only. Relevant parties should decide upon acceptable quality levels (AQLs) based on the relevant part of the AS1199 series.
Originated as AS K84-1960.
Previous edition AS 2905-1986.
Second edition 2005.
| AS 1199.3-2003 | Sampling procedures for inspection by attributes Skip-lot sampling procedures (Reconfirmed 2016) |
| AS 2582.3-2003 | Complete, filled transport packages - Methods of test Stacking tests using a static load (Reconfirmed 2020) |
| AS 1199.4-2003 | Sampling procedures for inspection by attributes Procedures for assessment of declared quality levels (Reconfirmed 2016) |
| AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
| AS/NZS 1595:1998 | Cold-rolled, unalloyed, steel sheet and strip (Reconfirmed 2016) |
| AS 1517-1991 | Tinplate and blackplate |
| AS 1199.0-2003 | Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016) |
| AS 1199.2-2003 | Sampling procedures for inspection by attributes Sampling plans indexed by limiting quality (LQ) for isolated lot inspection (Reconfirmed 2016) |
| AS 2582.8-2003 | Complete, filled transport packages - Methods of test Internal hydraulic pressure test (Reconfirmed 2020) |
| AS 2582.4-2003 | Complete, filled transport packages - Methods of test Vertical impact test by dropping (Reconfirmed 2020) |
| AS/NZS 1365:1996 | Tolerances for flat-rolled steel products (Reconfirmed 2016) |
| AS 3730.29-2006 | Guide to the properties of paints for buildings Solvent-borne - Exterior/interior - Paving paint (Reconfirmed 2016) |
| AS 3730.21-2006 | Guide to the properties of paints for buildings Primer - Solvent-borne - For ferrous metallic surfaces |
| AS/NZS 3750.8:1994 | Paints for steel structures Vinyl paints - Primer, high-build and gloss (Reconfirmed 2013) |
| AS 3730.3-2006 | Guide to the properties of paints for buildings Latex - Interior - Low gloss (Reconfirmed 2016) |
| AS/NZS 3750.9:1994 | Paints for steel structures - Organic zinc-rich primer |
| AS 3730.2-2006 | Guide to the properties of paints for buildings Latex - Interior - Semi-gloss (Reconfirmed 2016) |
| AS 4025.2-1993 | Paints for equipment including ships Solvent-borne - Interior and exterior - Undercoat |
| AS 3730.9-2006 | Guide to the properties of paints for buildings Latex - Exterior - Semi-gloss |
| AS/NZS 3750.11:2009 | Paints for steel structures Chlorinated rubber - High-build and gloss |
| AS 3730.5-2006 | Guide to the properties of paints forbuildings Solvent-borne - Interior - Semi-gloss (Reconfirmed 2016) |
| AS 3730.7-2006 | Guide to the properties of paints for buildings Latex - Exterior - Flat |
| AS 3730.11-1991 | Guide to the properties of paints for buildings Solvent-borne - Interior - Full gloss enamel |
| AS 3730.11-1991 | Guide to the properties of paints for buildings Solvent-borne - Interior - Full gloss enamel |
| AS 3750.2-1994 | Paints for steel structures - Ultra high-build paint |
| AS/NZS 3750.23:2008 | Paints for steel structures Semi-gloss enamel - Solvent-borne (Reconfirmed 2021) |
| AS/NZS 3750.7:2009 | Paints for steel structures Aluminium paint (Reconfirmed 2021) |
| AS 3730.15-2006 | Guide to the properties of paints for buildings Primer - Latex - For metallic zinc surfaces |
| AS 3730.13-2006 | Guide to the properties of paints for buildings Primer - Wood - Solvent-borne - Interior/exterior (Reconfirmed 2016) |
| AS/NZS 3750.22:2008 | Paints for steel structures Full gloss enamel - Solvent-borne (Reconfirmed 2021) |
| AS/NZS 3750.6:2009 | Paints for steel structures Full gloss polyurethane (two-pack) (Reconfirmed 2020) |
| AS 3730.28-2006 | Guide to the properties of paints for buildings Wood stain - Solvent-borne - Exterior |
| AS 4025.3-1993 | Paints for equipment including ships Solvent-borne - Interior and exterior - Semi-gloss enamel |
| AS 3730.26-1993 | Guide to the properties of paints for buildings Floor varnish - Moisture cured |
| AS/NZS 3750.11:1996 | Paints for steel structures - Chlorinated rubber - High-build and gloss |
| AS 3730.25-2006 | Guide to the properties of paints for buildings Clear finish - Solvent-borne - Interior (Reconfirmed 2016) |
| AS/NZS 3750.9:2009 | Paints for steel structures Organic zinc-rich primer (Reconfirmed 2019) |
| AS/NZS 3750.4:1994 | Paints for steel structures Bitumen paint (Reconfirmed 2013) |
| AS 3730.6-2006 | Guide to the properties of paints for buildings Solvent-borne - Interior/exterior - Full gloss enamel (Reconfirmed 2016) |
| AS 3730.16-2006 | Guide to the properties of paints for buildings Latex - Self-priming timber finish - Exterior |
| AS/NZS 3750.3:2008 | Paints for steel structures Heat resisting - Exterior (Reconfirmed 2020) |
| AS 3730.17-2006 | Guide to the properties of paints for buildings Primer - Wood - Latex - Interior/exterior (Reconfirmed 2016) |
| AS/NZS 3750.3:1994 | Paints for steel structures - Heat resisting - Exterior |
| AS 3730.14-2006 | Guide to the properties of paints for buildings Undercoat - Solvent-borne - Interior/exterior |
| AS 4049.3-2005 | Paints and related materials - Pavement marking materials Waterborne paint - For use with surface applied glass beads (Reconfirmed 2016) |
| AS 4025.1-1992 | Paints for equipment including ships Solvent-borne - Interior and exterior - Full gloss enamel |
| AS 3750.10-2008 | Paints for steel structures Full gloss epoxy (two-pack) (Reconfirmed 2019) |
| AS 3730.18-2006 | Guide to the properties of paints for buildings Undercoat/sealer - Latex - Interior/exterior |
| AS/NZS 3750.12:1996 | Paints for steel structures Alkyd/micaceous iron oxide (Reconfirmed 2013) |
| AS 3730.12-2006 | Guide to the properties of paints for buildings Latex - Interior - Gloss |
| AS/NZS 3750.1:2008 | Paints for steel structures Epoxy mastic (two-pack) - For rusted steel (Reconfirmed 2020) |
| AS 3730.1-2006 | Guide to the properties of paints for buildings Latex - Interior - Flat (Reconfirmed 2016) |
| AS 3730.22-2006 | Guide to the properties of paints for buildings Concrete and masonry sealer - Solvent-borne - Interior/exterior |
| AS/NZS 3750.5:2008 | Paints for steel structures Acrylic full gloss (two-pack) (Reconfirmed 2020) |
| AS/NZS 3750.7:1994 | Paints for steel structures - Aluminium paint |
| AS 3730.27-2006 | Guide to the properties of paints for buildings Clear coatings for interior timber floors |
| AS/NZS 3750.20:2008 | Paints for steel structures Anticorrosive metal primer - Solvent-borne - Lead and chromate free (Reconfirmed 2020) |
| AS 3750.1-1994 | Paints for steel structures - Epoxy mastic (two-pack) - For rusted steel |
| AS/NZS 3750.21:2008 | Paints for steel structures Undercoat - Solvent-borne (Reconfirmed 2021) |
| AS 3730.10-2006 | Guide to the properties of paints for buildings Latex - Exterior - Gloss (Reconfirmed 2016) |
| AS 3730.8-2006 | Guide to the properties of paints for buildings Latex - Exterior - Low-gloss (Reconfirmed 2016) |
| AS 4049.1-2005 | Paints and related materials - Pavement marking materials Solvent-borne paint - For use with surface applied glass beads (Reconfirmed 2016) |
| AS/NZS 3750.5:1994 | Paints for steel structures - Acrylic full gloss (two-pack) |
| AS/NZS 4081:2001 | The storage and handling of liquid and liquefied polyfunctional isocyanates (Reconfirmed 2021) |
| AS/NZS 3750.10:1994 | Paints for steel structures Full gloss epoxy (two-pack) |
| AS/NZS 3750.2:2008 | Paints for steel structures Ultra high-build paint (Reconfirmed 2020) |
| AS/NZS 3750.19:2008 | Paints for steel structures Metal primer - General purpose (Reconfirmed 2020) |
| AS 4089-1993 | Priming paint for steel - Single component - General purpose |
| AS 4025.4-1994 | Paints for equipment including ships Solvent-borne - Lead and chromate free - Anticorrosive metal primer |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.