AS 3688-1994
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
25-07-2024
01-01-1994
Specifies requirements for copper and copper alloy body pipe fittings and threaded-end connectors for use in water supply systems where the normal working temperature does not exceed 95 degrees Celsius, with maximum peaks of 110 degrees Celsius for short periods of time, and where the continuous working pressure ranges up to a maximum of 1.4 MPa for all fittings other than capillary fittings manufactured from copper tube.
Committee |
WS-001
|
DocumentType |
Standard
|
ISBN |
0 7262 8693 1
|
Pages |
34
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Standard specifies requirements for copper and copper alloy body pipe fittings and threaded-end connectors for use in water supply systems where the normal working temperature does not exceed 95C, with maximum peaks of 110C for short periods of time, and where the continuous working pressure ranges up to a maximum of 1.4 MPa for all fittings other than capillary fittings manufactured from copper tube. The maximum continuous working pressure for capillary fittings manufactured from copper tube, which complies with Section 5 of this Standard, is set out in AS 1432 for Type B copper tube.
For History before 1990 see Preface.
Second edition AS 3688-1994.
AS 1349-1986 | Bourdon tube pressure and vacuum gauges (Reconfirmed 2018) |
AS 1167.1-1993 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
AS 2837-1986 | Wrought alloy steels - Stainless steel bars and semi-finished products |
AS 3855-1994 | Suitability of plumbing and water distribution systems products for contact with potable water |
AS 1572-1998 | Copper and copper alloys - Seamless tubes for engineering purposes (Reconfirmed 2018) |
AS 3500.0-1990 | National Plumbing and Drainage Code Glossary of terms |
AS 3707-1989 | Method for testing pressure cycling resistance of pipes and fittings |
AS 2831-1985 | Thermometers - Solid stem - Long and short - For precision use |
AS 1834.1-1991 | Material for soldering Solder alloys (Reconfirmed 2018) |
AS 1192-1982 | Electroplated coatings - Nickel and chromium |
AS 2738.2-1984 | Copper and copper alloys - Compositions and designations - Wrought products |
AS 1722.1-1975 | Pipe threads of Whitworth form Sealing pipe threads (metric units) |
AS 1568-1985 | Copper and copper alloys - Forging stock and forgings |
AS 1565-1996 | Copper and copper alloys - Ingots and castings (Reconfirmed 2020) |
AS 1769-1975 | Welded stainless steel tubes for plumbing applications (Reconfirmed 2018) |
AS 1567-1985 | Copper and copper alloys - Wrought rods, bars and sections |
AS 1722.2-1992 | Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017) |
AS 1432-1996 | Copper tubes for plumbing, gasfitting and drainage applications |
AS 2845.1-1995 | Water supply - Backflow prevention devices - Materials, design and performance requirements |
ATS 5200.453-2004 | Technical Specification for plumbing and drainage products Heated water systems - Thermostatic circulation valve |
AS 2896-1998 | Medical gas systems - Installation and testing of non-flammable medical gas pipeline systems |
AS 4563-2003 (AG 300) | Commercial catering gas equipment |
AS 3496-1999 | Metal-bodied and plastic-bodied taps |
AS 1357.1-2004 | Valves primarily for use in heated water systems Protection valves |
AS 3499-1992 | Authorization requirements for plumbing products - Flexible tubes |
ATS 5200.042-2004 | Technical Specification for plumbing and drainage products - Roll-grooved jointing systems |
AS 5601-2004 | Gas installations |
AS 4563-2004 | Commercial catering gas equipment (Reconfirmed 2016) |
AS/NZS 4020:1999 | Products for use in contact with drinking water |
AS/NZS 3500.1.2:1998 | National plumbing and drainage Water supply - Acceptable solutions |
ATS 5200.020-2004 | Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with mains supply |
AS 4032.2-2002 | Water supply - Valves for the control of hot water supply temperatures - Tempering valves and end of line temperature actuated devices |
ATS 5200.104-2005 | Appliances (miscellaneous) |
AS 3517-1995 | Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications |
AS 4032.1-2005 | Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements |
ATS 5200.468-2005 | Technical Specification for plumbing and drainage products Hot water systems - Recirculation valves |
AS 1697-2005 | Installation and maintenance of steel pipe systems for gas |
AS 1718-1992 | Water supply - Copper alloy screw-down pattern taps - Specified by dimensions |
ATS 5200.464-2004 | Technical Specification for plumbing and drainage products - Hot water manual or sensor-activated pumping systems |
AS/NZS 3500.4.2:1997 | National Plumbing and Drainage Hot water supply systems - Acceptable solutions |
AS/NZS 3500.4:2003 | Plumbing and drainage Heated water services |
AS/NZS 3500.2:2003 | Plumbing and drainage Sanitary plumbing and drainage |
AS 3718-1992 | Water supply - Metal-bodied taps - Specified by performance |
AS 1357.2-1992 | Water supply - Valves for use with unvented water heaters - Control valves |
MP 52-2005 | Manual of authorization procedures for plumbing and drainage products |
AS 1357.1-1992 | Water supply - Valves for use with unvented water heaters Protection valves |
AS 4565-2004 | Radiant gas heaters for outdoor and non-residential indoor use (Reconfirmed 2017) |
AS 4809-2003 | Copper pipe and fittings - Installation and commissioning |
ATS 5200.037.2-2005 | Technical Specification for plumbing and drainage products Flow controllers - For use in heated or cold water plumbing systems |
AS 4554-2002 (AG 104) | Gas laundry dryers |
ATS 5200.037-2004 | Technical Specification for plumbing and drainage products - Flow controllers |
AS 2118.9-1995 | Automatic fire sprinkler systems Piping support and installation (Reconfirmed 2013) |
AS 3500.1-1992 | National Plumbing and Drainage Code Water supply |
ATS 5200.007-2004 | Technical Specification for plumbing and drainage products - Water hammer arrestors |
MP 52-1997 | Manual of authorization procedures for plumbing and drainage products |
AS 1172.2-1993 | Water closets of 6/3 L capacity - Cisterns |
AS 1628-1994 | Water supply - Copper alloy gate, globe and non-return valves |
AS 1910-1994 | Water supply - Float control valves for use in hot and cold water |
AS 4176-1994 | Polyethylene/aluminium and cross-linked polyethylene/aluminium macro-composite pipe systems for pressure applications |
ATS 5200.101-2005 | Appliances (low hazard rating) |
AS 1361-1995 | Electric heat-exchange water heaters - For domestic applications (Reconfirmed 2016) |
AS 4032-1998 | Thermostatic mixing valves - Materials, design and performance requirements |
AS 3499-1995 | Authorization requirements for plumbing products - Flexible tubes |
AS/NZS 4129:2000 | Fittings for polyethylene (PE) pipes for pressure applications |
AS 5200.000-2005 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products |
AS/NZS 3718:2005 | Water supply - Tap ware (Reconfirmed 2016) |
ATS 5200.021-2004 | Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with break tank supply |
ATS 5200.467-2004 | Technical Specification for plumbing and drainage products Rainwater tank connection valve |
AS 4020(INT)-1994 | Products for use in contact with water intended for human consumption with regard to their effect on the quality of water |
ATS 5200.466-2004 | Technical Specification for plumbing and drainage products - Rainwater tank connection devices |
AS/NZS 2642.3:1994 | Polybutylene pipe systems Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications |
AS 3497-1994 | Authorization requirements for plumbing products - Domestic type water treatment appliances |
AS 3498(INT)-1993 | Authorization requirements for plumbing products - Water heaters (all types) |
AS/NZS 3718:2003 | Water supply - Tap ware |
AS 1910-2004 | Water supply - Float control valves for use in hot and cold water (Reconfirmed 2016) |
AS 1357.2-1998 | Valves primarily for use in warm and hot water systems - Control valves |
AS 3498-1995 | Authorization requirements for plumbing products - Water heaters and hot-water storage tanks |
AS/NZS 3500.5:2000 | Plumbing and Drainage Domestic installations |
AS 2537-1994 | Mechanical jointing fittings for use with cross-linked polyethylene (PE-X) pipe for hot and cold water applications |
ATS 5200.012-2005 | Technical Specification for plumbing and drainage products In-line valves for use in plumbing water supply systems - Miscellaneous types metallic and non-metallic |
ATS 5200.046-2005 | Technical Specification for plumbing and drainage products Diversion systems - Wash down and first flush |
AS 3500.4-1994 | National Plumbing and Drainage Code Hot water supply systems |
ATS 5200.016-2005 | Technical Specification for plumbing and drainage products Cistern inlet valves |
AS/NZS 2845.1:1998 | Water supply - Backflow prevention devices Materials, design and performance requirements |
AS/NZS 3497:1998 | Drinking water treatment units - Plumbing requirements |
MP 52-2001 | Manual of authorization procedures for plumbing and drainage products |
AS/NZS 4129(INT):1997 | Fittings for polyethylene (PE) pipes for pressure applications |
AS 4796-2001 | Water supply - Metal bodied and plastic bodied ball valves for property service connection |
AS 3496-1995 | Authorization requirements for plumbing products - Metal-bodied and plastic-bodied taps |
AS 4557-2004 | Domestic outdoor gas barbecues |
AS/NZS 3500.1:2003 | Plumbing and drainage Water services |
ATS 5200.052-2005 | Metallic-bodied inlet pressure control valves greater than DN 50 |
AS/NZS 3718:1997 | Water supply - Metal-bodied taps - Specified by performance |
AS 1589-1994 | Copper and copper alloy waste fittings |
ATS 5200.030-2004 | Technical Specification for plumbing and drainage products - Solenoid valves |
AS 3498-2003 | Authorization requirements for plumbing products - Water heaters and hot-water storage tanks |
AS 1589-2001 | Copper and copper alloy waste fittings (Reconfirmed 2018) |
AS 4560-2004 | Gas pool heaters (Reconfirmed 2016) |
AS 4032-1992 | Thermostatic mixing valves - Materials, design and performance requirements |
AS 4032-1995 | Thermostatic mixing valves - Materials, design and performance requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.