AS 3727.1:2016
Current
Current
The latest, up-to-date edition.
Pavements Residential
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English
Published date
13-12-2016
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.This Standard specifies the design and construction of pavements for light usage, low speed, non-commercial applications for vehicles with a gross vehicle mass not exceeding 10t. This includes patios, paths, driveways, vehicle crossovers and recreational pavements such as cycleways.
| Committee |
BD-098
|
| DocumentType |
Standard
|
| ISBN |
978-1-76035-610-1
|
| Pages |
34
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies the design and construction of pavements for light usage, low speed, non-commercial applications for vehicles with a gross vehicle mass not exceeding 10 t. This includes patios, paths, driveways, vehicle crossovers and recreational pavements such as cycleways.This Standard excludes the following:(a) Concrete pavements using fibres as the sole means of reinforcement.(b) Roads and industrial pavements.(c) Class H1, H2, E and P sites (see Table 1.5).
Originated as AS3727-1993.
Revised and redesignated as AS3727.1:2016.
| AS 1289.4.4.1-1997 | Methods of testing soils for engineering purposes Soil chemical tests - Determination of the electrical resistivity of a soil - Method for sands and granular materials |
| AS 1289.6.3.3-1997 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the penetration resistance of a soil - Perth sand penetrometer test (Reconfirmed 2013) |
| AS/NZS 4456.10:2003 | Masonry units, segmental pavers and flags - Methods of test Determining resistance to salt attack (Reconfirmed 2023) |
| AS 1289.6.1.3-1998 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard field-in-place method |
| AS/NZS 4456.0:2003 | Masonry units, segmental pavers and flags - Methods of test General introduction and list of methods (Reconfirmed 2023) |
| AS 1428-1977 | Code of practice of design rules for access by the disabled |
| AS/NZS 4456.9:2003 | Masonry units and segmental pavers and flags - Methods of test Determining abrasion resistance |
| AS 1289.2.2.1-1998 | Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the total suction of a soil - Standard method (Reconfirmed 2013) |
| AS 1289.6.3.1-2004 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the penetration resistance of a soil - Standard penetration test (SPT) (Reconfirmed 2016) |
| AS 1289.3.5.1-2006 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the soil particle density of a soil - Standard method |
| AS 1289.5.8.5-1998 | Methods of testing soils for engineering purposes Soil compaction and density tests - Nuclear surface moisture-density gauges - Density of a Type A or Type C standard density block (Reconfirmed 2013) |
| AS 1289.6.5.1-1999 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the static cone penetration resistance of a soil - Field test using a mechanical and electrical cone or friction-cone penetrometer (Reconfirmed 2013) |
| AS 1289.3.5.2-2002 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the soil particle density of combined soil fractions - Vacuum pycnometer method (Reconfirmed 2013) |
| AS/NZS 4456.14:2003 | Masonry units, segmental pavers and flags - Methods of test Determining water absorption properties (Reconfirmed 2023) |
| AS 1289.2.1.4-2005 | Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Microwave-oven drying method (subsidiary method) |
| AS 1289.5.7.1-2006 | Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Hilf density ratio and Hilf moisture variation (rapid method) |
| AS/NZS 3661.2:1994 | Slip resistance of pedestrian surfaces Guide to the reduction of slip hazards |
| AS 1289.3.9.2-2006 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the cone liquid limit of soil - One-point method |
| AS 1289.2.1.2-2005 | Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Sand bath method (subsidiary method) |
| AS 1289.4.1.1-1997 | Methods of testing soils for engineering purposes Soil chemical tests - Determination of the organic matter content of a soil - Normal method |
| AS/NZS 4456.6:2003 | Masonry units, segmental pavers and flags - Methods of test Determining potential to effloresce (Reconfirmed 2023) |
| AS 1289.2.1.1-2005 | Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Oven drying method (standard method) |
| AS 1289.3.3.1-2009 | Methods of testing soils for engineering purposes Soil classification tests - Calculation of the plasticity index of a soil (Reconfirmed 2022) |
| AS 2870-2011 | Residential slabs and footings |
| AS 1289.2.1.5-2005 | Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Infrared lights method (subsidiary method) |
| AS 1289.7.1.2-1998 | Methods of testing soils for engineering purposes Soil reactivity tests - Determination of the shrinkage index of a soil - Loaded shrinkage index |
| AS 1289.7.1.1-2003 | Methods of testing soils for engineering purposes Soil reactivity tests - Determination of the shrinkage index of a soil - Shrink-swell index |
| AS 1289.5.8.8-1998 | Methods of testing soils for engineering purposes Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using proportion of water (Reconfirmed 2013) |
| AS 1289.0:2014 | Methods of testing soils for engineering purposes Definitions and general requirements |
| AS 1289.5.4.2-2007 | Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Assignment of maximum dry density and optimum moisture content values |
| AS 1289.6.7.3:2016 | Methods of testing soils for engineering purposes Soil strength and consolidation tests-Determination of permeability of a soil-Constant head method using a flexible wall permeameter |
| AS 1289.6.6.1-1998 | Methods of testing soils for engineering purposes - Soil strength and consolidation tests Determination of the one-dimensional consolidation properties of a soil - Standard method |
| AS/NZS 4456.3:2003 | Masonry units, segmental pavers and flags - Methods of test Determining dimensions |
| AS 1289.3.7.1-2002 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the sand equivalent of a soil using a power-operated shaker |
| AS 1289.6.2.2-1998 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of shear strength of a soil - Direct shear test using a shear box |
| AS/NZS 4456.18:2003 | Masonry units, segmental pavers and flags - Methods of test Determining tensile strength of masonry units and segmental pavers (Reconfirmed 2023) |
| AS/NZS 4456.19:2003 | Masonry units, segmental pavers and flags - Methods of test Determination of bow |
| AS/NZS 4456.8:2003 | Masonry units, segmental pavers and flags - Methods of test Determining moisture content, dry density and ambient density (Reconfirmed 2023) |
| AS 1289.6.4.2:2016 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a saturated specimen tested in undrained triaxial compression with measurement of pore water pressure |
| AS 1289.6.4.1:2016 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a specimen tested in undrained triaxial compression without measurement of pore water pressure |
| AS 1289.3.8.3:2014 | Methods of testing soils for engineering purposes Soil classification tests - Dispersion - Determination of pinhole dispersion classification of a soil |
| AS 1289.5.2.1-2003 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the dry density or moisture content relation of a soil using modified compactive effort |
| AS/NZS 4456.15:2003 | Masonry units, segmental pavers and flags - Methods of test Determining lateral modulus of rupture (Reconfirmed 2023) |
| AS 1289.4.2.1-1997 | Methods of testing soils for engineering purposes Soil chemical tests - Determination of the sulfate content of a natural soil and the sulfate content of the groundwater - Normal method |
| AS 1289.3.6.1-2009 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the particle size distribution of a soil - Standard method of analysis by sieving (Reconfirmed 2022) |
| AS 1289.5.8.9-1998 | Methods of testing soils for engineering purposes Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using comparison against primary blocks (Reconfirmed 2013) (Reconfirmed 2014) |
| AS 1289.5.8.4-2009 | Methods of testing soils for engineering purposes Soil compaction and density tests - Nuclear surface moisture-density gauges - Calibration using standard blocks |
| AS 1289.3.2.1-2009 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the plastic limit of a soil - Standard method (Reconfirmed 2022) |
| AS/NZS 4456.17:2003 | Masonry units, segmental pavers and flags - Methods of test Determining initial rate of absorption (suction) (Reconfirmed 2023) |
| AS 1289.5.1.1-2003 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compactive effort |
| AS/NZS 4671:2001 | Steel reinforcing materials |
| AS 1289.6.3.2-1997 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the penetration resistance of a soil - 9 kg dynamic cone penetrometer test |
| AS/NZS 4456.7:2003 | Masonry units, segmental pavers and flags - Methods of test Determining core percentage and material thickness (Reconfirmed 2023) |
| AS 1289.3.3.2-2009 | Methods of testing soils for engineering purposes Soil classification tests - Calculation of the cone plasticity index of a soil (Reconfirmed 2022) |
| AS 1289.3.1.2-2009 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the liquid limit of a soil - One point Casagrande method (subsidiary method) (Reconfirmed 2017) |
| AS 3798-2007 | Guidelines on earthworks for commercial and residential developments |
| AS/NZS 4455.2:2010 | Masonry units, pavers, flags and segmental retaining wall units Pavers and flags (Reconfirmed 2020) |
| AS 2008-2013 | Bitumen for pavements |
| AS 1289.6.9.1-2000 | Methods of testing soils for engineering purposes Soil strength and consolidation test - Determination of stiffness of soil - Clegg impact value (CIV) |
| AS 1289.1.1-2001 | Methods of testing soils for engineering purposes Sampling and preparation of soils - Preparation of disturbed soil samples for testing |
| AS 1289.6.1.2-1998 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard laboratory method for an undisturbed specimen |
| AS 1289.5.5.1-1998 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the minimum and maximum dry density of a cohesionless material - Standard method (Reconfirmed 2016) |
| AS 1289.3.9.1:2015 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the cone liquid limit of a soil |
| AS 1289.1.2.1-1998 | Methods of testing soils for engineering purposes Sampling and preparation of soils - Disturbed samples - Standard method |
| AS/NZS 4586:2004 | Slip resistance classification of new pedestrian surface materials |
| AS/NZS 4456.11:2003 | Masonry units, segmental pavers and flags - Methods of test Determining coefficients of expansion (Reconfirmed 2023) |
| AS 1289.1.4.2-1998 | Methods of testing soils for engineering purposes Sampling and preparation of soils - Selection of sampling or test sites - Stratified random number method (Reconfirmed 2013) |
| AS/NZS 2425:2015 | Bar chairs in reinforced concrete - Product requirements and test methods |
| AS 1289.2.1.6-2005 | Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Hotplate drying method |
| AS 1289.5.8.1-2007 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture-Density gauge - Direct transmission mode |
| AS 1289.5.3.5-1997 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method (Reconfirmed 2013) |
| AS 1289.4.3.1-1997 | Methods of testing soils for engineering purposes Soil chemical tests - Determination of the pH value of a soil - Electrometric method |
| AS/NZS 4456.5:2003 | Masonry units, segmental pavers and flags - Methods of test Determining the breaking load of segmental pavers and flags |
| AS 2150-2005 | Hot mix asphalt - A guide to good practice |
| AS 1289.5.4.3-2006 | Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Dry density ratio and moisture ratio using statistical selection of reference values |
| AS 1289.5.6.1-1998 | Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Density index method for a cohesionless material (Reconfirmed 2016) |
| AS 3600-2009 | Concrete structures |
| AS 1289.3.1.1-2009 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the liquid limit of a soil - Four point Casagrande method (Reconfirmed 2017) |
| AS 1289.5.3.2-2004 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand pouring can, with or without a volume displacer (Reconfirmed 2016) |
| AS 1289.6.2.1-2001 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the shear strength of a soil - Field test using a vane (Reconfirmed 2013) |
| AS 1289.2.3.1-1998 | Methods of testing soils for engineering purposes Soil moisture content tests - Establishment of correlation - Subsidiary method and the standard method (Reconfirmed 2013) |
| AS 1289.3.8.2-2008 | Methods of testing soils for engineering purposes Soil classification tests - Dispersion - Determination of the percent dispersion of a soil (Reconfirmed 2016) |
| AS 1379-2007 | Specification and supply of concrete (Reconfirmed 2017) |
| AS 1289.6.7.1-2001 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of permeability of a soil - Constant head method for a remoulded specimen (Reconfirmed 2013) |
| AS 1289.3.6.3-2003 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the particle size distribution of a soil - Standard method of fine analysis using a hydrometer |
| AS 1289.1.4.1-1998 | Methods of testing soils for engineering purposes Sampling and preparation of soils - Selection of sampling or test sites - Random number method (Reconfirmed 2013) |
| AS 3799-1998 | Liquid membrane-forming curing compounds for concrete (Reconfirmed 2018) |
| AS 1289.6.1.1:2014 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard laboratory method for a remoulded specimen |
| AS/NZS 4456.2:2003 | Masonry units, segmental pavers and flags - Methods of test Assessment of mean and standard deviation (Reconfirmed 2023) |
| AS/NZS 4456.13:2003 | Masonry units, segmental pavers and flags - Methods of test Determining pitting due to lime particles (Reconfirmed 2023) |
| AS/NZS 4456.1:2003 | Masonry units, segmental pavers and flags - Methods of test Sampling for test (Reconfirmed 2023) |
| AS 1289.5.3.1-2004 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand-cone pouring apparatus (Reconfirmed 2016) |
| AS 1289.7.1.3-1998 | Methods of testing soils for engineering purposes Soil reactivity tests - Determination of the shrinkage index of a soil - Core shrinkage index (Reconfirmed 2013) |
| AS 1289.5.4.1-2007 | Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio (Reconfirmed 2016) |
| AS 1289.6.7.2-2001 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of permeability of a soil - Falling head method for a remoulded specimen (Reconfirmed 2013) |
| AS 1289.1.3.1:2015 | Methods of testing soils for engineering purposes Sampling and preparation of soils - Undisturbed samples - Standard method |
| AS/NZS 4456.4:2003 | Masonry units, segmental pavers and flags - Methods of test Determining compressive strength of masonry units |
| AS 1289.3.4.1-2008 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the linear shrinkage of a soil - Standard method |
| AS 1289.3.8.1-2006 | Methods of testing soils for engineering purposes Soil classification tests - Dispersion - Determination of Emerson class number of a soil |
| AS 1289.5.8.7-1998 | Methods of testing soils for engineering purposes Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using hydrogen content of components |
| AS/NZS 4456.12:2003 | Masonry units and segmental pavers and flags - Methods of test Determining coefficients of contraction (Reconfirmed 2023) |
| AS/NZS 4456.16:2003 | Masonry units, segmental pavers and flags - Methods of test Determining permeability to water (Reconfirmed 2023) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.