AS 3795-1996
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Copper alloy tubes for plumbing and drainage applications
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
30-01-2019
English
01-01-1996
Important note : Users cannot be edited or removed once added to your Multi user PDF.Specifies requirements for round seamless copper alloy tubes, designated as either brass which is intended primarily for sanitary plumbing and stormwater drainage services, or copper nickel which is intended primarily for water services. The ranges of nominal sizes are DN 10 to DN 150 inclusive for Type B brass, and DN 32 to DN 150 inclusive for Type D brass and DN 10 to DN 80 inclusive for Type B copper nickel. Details of dimensions and tolerances, chemical composition, temper and form of material, testing and marking are specified. The appendices propose purchasing guidelines, safe working pressure, testing pressure, and hydrostatic test.
| Committee |
WS-018
|
| DocumentType |
Standard
|
| ISBN |
0 7337 0358 5
|
| Pages |
11
|
| ProductNote |
Withdrawn 30-01-2019.
|
| PublisherName |
Standards Australia
|
| Status |
Withdrawn
|
| Supersedes |
This Standard specifies requirements for round seamless copper alloy tubes intended for use in pressure and non-pressure plumbing and drainage applications as follows:(a) Brass tubes intended primarily for sanitary plumbing and stormwater drainage services.(b) Copper nickel tubes intended primarily for water services.NOTES:1 Clause 4 gives classification of tubes covered by this Standard.2 Guidelines to purchasers on information that should be supplied at the time of enquiry or order are detailed in Appendix A.3 Safe working pressure and testing pressure for installed copper alloy tubes are given in Appendix B.
First published as AS 3795-1990.
Second edition AS 3795-1996.
| AS 4041-1998 | Pressure piping |
| AS 2706-1984 | Numerical values - Rounding and interpretation of limiting values |
| AS 1572-1998 | Copper and copper alloys - Seamless tubes for engineering purposes (Reconfirmed 2018) |
| AS 3500.0-1990 | National Plumbing and Drainage Code Glossary of terms |
| AS 1817-1991 | Metallic materials - Vickers hardness test |
| AS 2136-1977 | Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test (Reconfirmed 2018) |
| AS 3855-1994 | Suitability of plumbing and water distribution systems products for contact with potable water |
| AS 2084-1987 | Non-destructive testing - Eddy current testing of metal tubes |
| AS 2738.2-1984 | Copper and copper alloys - Compositions and designations - Wrought products |
| AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
| AS 2706-2003 | Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018) |
| AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
| AS 1349-1986 | Bourdon tube pressure and vacuum gauges (Reconfirmed 2018) |
| AS 3517-2007 | Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications (Reconfirmed 2018) |
| AS/NZS 3500.4:2015 | Plumbing and drainage Heated water services |
| AS 5200.000-2006 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018) |
| AS/NZS 3500.2:2018 | Plumbing and drainage Sanitary plumbing and drainage |
| AS/NZS 3500.1:2018 | Plumbing and drainage Water Services |
| AS 4072.1-1992 | Components for the protection of openings in fire-resistant separating elements - Service penetrations and control joints |
| AS 3517-1995 | Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications |
| AS/NZS 3500.5:2012 | Plumbing and drainage Housing installations |
| AS/NZS 3500.4:2003 | Plumbing and drainage Heated water services |
| AS/NZS 3500.2:2003 | Plumbing and drainage Sanitary plumbing and drainage |
| MP 52-2005 | Manual of authorization procedures for plumbing and drainage products |
| AS/NZS 3500.3:2003 | Plumbing and drainage Stormwater drainage |
| AS 3500.1-1992 | National Plumbing and Drainage Code Water supply |
| MP 52-1997 | Manual of authorization procedures for plumbing and drainage products |
| AS 5200.000-2005 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products |
| AS/NZS 3500.3:2018 | Plumbing and drainage Stormwater drainage |
| AS 4775-2007 | Emergency eyewash and shower equipment |
| AS/NZS 3500.5:2000 | Plumbing and Drainage Domestic installations |
| MP 52-2001 | Manual of authorization procedures for plumbing and drainage products |
| AS/NZS 3500.4:2018 | Plumbing and drainage Heated water services |
| AS/NZS 3500.1:2003 | Plumbing and drainage Water services |
| AS 1589-1994 | Copper and copper alloy waste fittings |
| AS 4072.1-2005 | Components for the protection of openings in fire-resistant separating elements Service penetrations and control joints (Reconfirmed 2016) |
| AS 1589-2001 | Copper and copper alloy waste fittings (Reconfirmed 2018) |
| AS/NZS 3500.3:2015 | Plumbing and drainage Stormwater drainage |
| AS 4032-1992 | Thermostatic mixing valves - Materials, design and performance requirements |
| AS/NZS 3500.3.2:1998 | National plumbing and drainage Stormwater drainage - Acceptable solutions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.