AS 4032.2-2005
Current
The latest, up-to-date edition.
Water supply - Valves for the control of hot water supply temperatures Tempering valves and end-of-line temperature-actuated devices (Reconfirmed 2015)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
13-12-2005
The objective of this Standard is to provide manufacturers with requirements for tempering valves and end-of-line temperature-actuated devices that give reasonable protection to users against exposure to high or excessive fluctuations in mixed water temperatures caused by the following: - Maintaining an outlet temperature within specified limits, including shut-off of the cold water supply. - Closing the outlet when the mixed water temperature exceeds a specified maximum.
Committee |
WS-026
|
DocumentType |
Standard
|
ISBN |
0 7337 7048 7
|
Pages |
40
|
ProductNote |
Reconfirmed 14/07/2015.This standard as been reconfirmed in Australia in 2015 and remains current in New Zealand. Reconfirmation Notice 14/07/2015
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes | |
UnderRevision |
This Standard specifies requirements for the design, construction, testing and performance of - (a) tempering valves of nominal sizes not larger than DN32; and(b) end-of-line temperature-actuated devices of nominal size not larger than DN25,for use with heated water at - (i) continuous operating temperature not exceeding 85°C;(ii) temperature under emergency conditions, not exceeding 99°C; and(iii) continuous working pressure not exceeding 1400kPa.Devices complying with this Standard are intended to prevent a continuous discharge of water from the outlet in excess of 50°C under steady-state conditions.Transient discharges of water with a temperature in excess of this figure, which comply with the specified cumulative time/temperature factors, are acceptable.NOTE: Tempering valves, when adjusted to an outlet temperature not exceeding 50°C, and end-of-line devices may be used for temperature-limiting for ablution purposes, to minimize the risk of scalding, other than for use in health care, aged care, child care, care for people with disabilities and any other at-risk situations. Thermostatic mixing valves complying with AS4032.1, when adjusted to an outlet temperature not exceeding 45°C, are intended for use in health care, aged care, child care, care for people with disabilities and any other at-risk situations.
Originated as AS 4032.2-2002.
Second Edition 2005.
Reissued incorporating Amendment No. 1 (October 2006).
Reissued incorporating Amendment No. 2 (June 2009).
ATS 5200.006-2005 | Technical Specification for plumbing and drainage products Reflux valves - Sewerage |
ATS 5200.033-2004 | Technical Specification for plumbing and drainage products Spraying apparatus/dispensing units with the option of chemical additions - Hose connected |
ATS 5200.006-2004 | Technical Specification for plumbing and drainage products Reflux valves - sewerage |
ATS 5200.021-2004 | Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with break tank supply |
AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
AS 1722.1-1975 | Pipe threads of Whitworth form Sealing pipe threads (metric units) |
AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
ATS 5200.467-2004 | Technical Specification for plumbing and drainage products Rainwater tank connection valve |
ATS 5200.463-2005 | Positive air pressure attenuator |
ATS 5200.464-2004 | Technical Specification for plumbing and drainage products - Hot water manual or sensor-activated pumping systems |
ATS 5200.468-2005 | Technical Specification for plumbing and drainage products Hot water systems - Recirculation valves |
ATS 5200.014-2004 | Technical Specification for plumbing and drainage products - Jointing materials |
ATS 5200.999-2005 | Technical Specification for plumbing and drainage products Developing technical specifications |
ATS 5200.471-2005 | Technical specification for plumbing and drainage products Stainless steel tubes and mechanical compression fittings for pressure applications - Alternative systems |
AS/NZS 3499:1997 | Flexible tube connectors for water supply |
ATS 5200.028-2004 | Technical Specification for plumbing and drainage products - Commercial food waste disposal unit |
AS/NZS 1567:1997 | Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021) |
ATS 5200.104-2005 | Appliances (miscellaneous) |
ATS 5200.105-2005 | |
ATS 5200.030-2004 | Technical Specification for plumbing and drainage products - Solenoid valves |
ATS 5200.040-2005 | Waste pipe connection outlets and gratings, separate or integral |
ATS 5200.007-2004 | Technical Specification for plumbing and drainage products - Water hammer arrestors |
AS 2136-1977 | Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test (Reconfirmed 2018) |
AS 1349-1986 | Bourdon tube pressure and vacuum gauges (Reconfirmed 2018) |
AS 2738-2000 | Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018) |
ATS 5200.026-2004 | Technical Specification for plumbing and drainage products Cold water storage tanks |
ATS 5200.420-2005 | Technical Specification for plumbing and drainage products Trap-priming valves |
ATS 5200.017-2005 | Technical Specification for plumbing and drainage products Cistern outlet valves |
AS/NZS 1568:1998 | Copper and copper alloys - Forging stock and forgings |
AS 2837-1986 | Wrought alloy steels - Stainless steel bars and semi-finished products |
ATS 5200.103-2004 | Technical Specification for plumbing and drainage products - Water treatment systems (other than those specified in AS/NZS 3497) |
ATS 5200.101-2005 | Appliances (low hazard rating) |
ATS 5200.016-2005 | Technical Specification for plumbing and drainage products Cistern inlet valves |
ATS 5200.004-2005 | Technical Specification for plumbing and drainage products Urinal flushing cisterns |
ATS 5200.050-2005 | Technical Specification for plumbing and drainage products Prefabricated bathroom modules |
AS 1834.1-1991 | Material for soldering Solder alloys (Reconfirmed 2018) |
AS/NZS 1167.1:2005 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
AS 1572-1998 | Copper and copper alloys - Seamless tubes for engineering purposes (Reconfirmed 2018) |
ATS 5200.046-2005 | Technical Specification for plumbing and drainage products Diversion systems - Wash down and first flush |
ATS 5200.042-2004 | Technical Specification for plumbing and drainage products - Roll-grooved jointing systems |
AS 4032.3-2004 | Water supply - Valves for the control of heated water supply temperatures Requirements for field-testing, maintenance or replacement of thermostatic mixing valves, tempering valves and end-of-line temperature control devices |
ATS 5200.052-2005 | Metallic-bodied inlet pressure control valves greater than DN 50 |
ATS 5200.051-2005 | Technical Specification for plumbing and drainage products Bidet douche seats |
AS 3558.5-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of degradation by ultraviolet light (Reconfirmed 2016) |
AS 5200.000-2005 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products |
ATS 5200.466-2004 | Technical Specification for plumbing and drainage products - Rainwater tank connection devices |
ATS 5200.460-2005 | Technical Specification for plumbing and drainage products Grey water diversion device (GWDD) |
AS 3688-2005 | Water supply - Metallic fittings and end connectors |
ATS 5200.469-2005 | Technical Specification for plumbing and drainage products Waterless or limited flush urinals - With an integral sealing device |
AS 1722.2-1992 | Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017) |
ATS 5200.453-2004 | Technical Specification for plumbing and drainage products Heated water systems - Thermostatic circulation valve |
ATS 5200.047-2005 | Technical Specification for plumbing and drainage products Self-sealing devices |
ATS 5200.461-2004 | Technical Specification for plumbing and drainage products Stainless steel tubes and mechanical compression fittings for pressure applications |
ATS 5200.012-2005 | Technical Specification for plumbing and drainage products In-line valves for use in plumbing water supply systems - Miscellaneous types metallic and non-metallic |
AS 1432-2004 | Copper tubes for plumbing, gasfitting and drainage applications |
ATS 5200.458-2004 | Technical Specification for plumbing and drainage products Universal transition fitting |
ATS 5200.037.2-2005 | Technical Specification for plumbing and drainage products Flow controllers - For use in heated or cold water plumbing systems |
AS 1565-1996 | Copper and copper alloys - Ingots and castings (Reconfirmed 2020) |
AS 2345-1992 | Dezincification resistance of copper alloys |
ATS 5200.459-2004 | |
ATS 5200.037-2004 | Technical Specification for plumbing and drainage products - Flow controllers |
ATS 5200.020-2004 | Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with mains supply |
AS 4032.1-2005 | Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements |
AS 5200.000-2006 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018) |
AS/NZS 3500.5:2012 | Plumbing and drainage Housing installations |
AS/NZS 3500.4:2003 | Plumbing and drainage Heated water services |
MP 52-2005 | Manual of authorization procedures for plumbing and drainage products |
AS/NZS 3500.4:2018 | Plumbing and drainage Heated water services |
AS 3498:2020 | Safety and public health requirements for plumbing products - Water heaters and hot-water storage tanks |
AS 3498-2003 | Authorization requirements for plumbing products - Water heaters and hot-water storage tanks |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.