• There are no items in your cart

AS 60068.2.27-2003

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Environmental testing Tests - Test Ea and guidance: Shock

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

07-02-2024

Superseded by

AS 60068.2.27:2023

Language(s)

English

Published date

01-01-2003

€92.72
Excluding VAT

1 - AS 60068.2.27-2003 ENVIRONMENTAL TESTING - TESTS-TEST Ea AND GUIDANCE: SHOCK
4 - PREFACE
5 - CONTENTS
6 - INTRODUCTION
7 - 1 Scope
7 - 2 General description
7 - 3 Definitions
7 - 3.1 Fixing point
8 - 3.2 Checkpoint
8 - 3.3 Shock severity
8 - 3.4 Velocity change
8 - 3.5 gn
8 - 4 Description of test apparatus
8 - 4.1 Required characteristics
8 - 4.1.1 Basic pulse shapes
8 - 4.1.2 Velocity change tolerances
9 - 4.1.3 Transverse motion
9 - 4.2 Measuring system
9 - 4.3 Mounting
9 - 5 Severities
10 - 6 Preconditioning
10 - 7 Initial measurements
10 - 8 Conditioning
10 - 8.1 Application of shocks
10 - 8.2 Operating mode and functional monitoring
11 - 9 Recovery
11 - 10 Final measurements
11 - 11 Information to be given in the relevant specification
12 - Annex A - Guidance
12 - A.1 Introduction
12 - A.2 Applicability of test
12 - A.3 Pulse shapes
13 - A.4 Test severity
15 - A.5 Tolerances
15 - A.6 Velocity change
16 - A.7 Conditioning
17 - Annex B - Shock response spectra and other characteristics of pulse shapes
17 - Introduction
17 - B.1 The shock response spectrum concept
18 - B.2 The use of first-order shock response spectra in practical cases
19 - B.3 The shock response spectra of the nominal pulse shapes
19 - B.4 The effect of ripple
20 - B.5 Reproducing the effects of various shock pulses by a single pulse
21 - Annex C - Comparison between impact tests

AS 60068.2.27-2003 identically adopts IEC 60068-2-27:1987 which provides a standard procedure for determining the ability of a specimen to withstand specified severities of shock.

Committee
EL-026
DocumentType
Standard
ISBN
0 7337 5263 2
Pages
25
ProductNote
Withdrawn 30-01-2019.
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes

To provide a standard procedure for determining the ability of a specimen to withstand specified severities of shock.

Standards Relationship
IEC 60068-2-27:1987 Identical

First published as AS 1099.2Ea-1971.
Revised and redesignated as AS 1099.2.27-1988.
Revised and redesignated as AS 60068.2.27-2003.

AS 62052.11-2005 Electricity metering equipment (AC) - General requirements, tests and test conditions Metering equipment (IEC 62052-11, Ed.1.0 (2003) MOD)
AS 62052.21-2006 Electricity metering equipment (ac) - General requirements, tests and test conditions Tariff and load control equipment (IEC 62052-21, Ed. 1.0 (2004) MOD)
AS 60118.7-2007 Hearing aids Measurement of the performance characteristics of hearing aids for production, supply and delivery quality assurance purposes (Reconfirmed 2019)
AS 60118.9-2007 Hearing aids Methods of measurement of characteristics of hearing aids with bone vibrator output (Reconfirmed 2019)
AS 60947.5.2-2004 Low-voltage switchgear and controlgear Control circuit devices and switching elements - Proximity switches
AS 60947.5.2-2004 Low-voltage switchgear and controlgear Control circuit devices and switching elements - Proximity switches
AS 60947.5.1-2004 Low-voltage switchgear and controlgear Control circuit devices and switching elements - Electromechanical control circuit devices
AS/NZS 3439.4:2009 Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for construction sites (ACS)
AS 7240.22-2008 Fire detection and alarm systems Smoke-detection equipment for ducts (ISO 7240-22:2007, MOD)
AS/NZS 61000.4.7:2012 Electromagnetic compatibility (EMC) Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto (Reconfirmed 2023)
AS 7240.8-2007 Fire detection and alarm systems Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor
AS 62103-2006 Electronic equipment for use in power installations
AS 2067-2008 Substations and high voltage installations exceeding 1 kV a.c.
AS 60947.5.4-2004 Low-voltage switchgear and controlgear Control circuit devices and switching elements - Methods of assessing the performance of low-energy contacts - Special tests
AS 7240.6-2006 Fire detection and alarm systems Carbon monoxide fire detectors using electro-chemical cells (Reconfirmed 2016)
AS 61204.1-2003 Low-voltage power supply devices, d.c. output Performance characteristics (Reconfirmed 2014)
AS 7240.10-2007 Fire detection and alarm systems Point-type flame detectors
AS/NZS 60079.15:2006 Electrical apparatus for explosive gas atmospheres Construction, test and marking of type of protection, n electrical apparatus
AS/NZS 60079.15:2011 Explosive atmospheres Equipment protection by type of protection 'n'
AS 2650-2005 Common specifications for high-voltage switchgear and controlgear standards (IEC 60694 Ed.2.2(2002) MOD)
AS IEC 61131.2-2004 Programmable controllers - Equipment requirements and tests
AS 62271.1-2012 High-voltage switchgear and controlgear Common specifications

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.