AS 62061-2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
20-12-2019
English
10-05-2006
Important note : Users cannot be edited or removed once added to your Multi user PDF.Introduction1 Scope2 Normative references3 Terms, definitions and abbreviations 3.1 Alphabetical list of definitions 3.2 Terms and definitions 3.3 Abbreviations4 Management of functional safety 4.1 Objective 4.2 Requirements5 Requirements for the specification of Safety-Related Control Functions (SRCFs) 5.1 Objective 5.2 Specification of requirements for SRCFs6 Design and integration of the safety-related electrical control system (SRECS) 6.1 Objective 6.2 General requirements 6.3 Requirements for behaviour (of the SRECS) on detection of a fault in the SRECS 6.4 Requirements for systematic safety integrity of the SRECS 6.5 Selection of safety-related electrical control system 6.6 Safety-related electrical control system (SRECS) design and development 6.7 Realisation of subsystems 6.8 Realisation of diagnostic functions 6.9 Hardware implementation of the SRECS 6.10 Software safety requirements specification 6.11 Software design and development 6.12 Safety-related electrical control system integration and testing 6.13 SRECS installation7 Information for use of the SRECS 7.1 Objective 7.2 Documentation for installation, use and maintenance8 Validation of the safety-related electrical control system 8.1 Objective 8.2 General requirements 8.3 Validation of SRECS systematic safety integrity9 Modification 9.1 Objective 9.2 This Clause specifies the modification procedure(s) to be applied when modifying the SRECS during design, integration and validation (e.g. during SRECS installation and commissioning). Modification procedure 9.3 Configuration management procedures10 DocumentationAnnex A (informative) SIL assignmentAnnex B (informative) Example of safety-related electrical control system (SRECS) design using concepts and requirements of Clauses 5 and 6Annex C (informative) Guide to embedded software design and developmentAnnex D (informative) Failure modes of electrical/electronic componentsAnnex E (informative) Electromagnetic (EM) phenomenon and increased immunity levels for SRECS intended for use in an industrial environment according to IEC 61000-6-2Annex F (informative) Methodology for the estimation of susceptibility to common cause failures (CCF)
Provides requirements and makes recommendations for the specification, design and validation of safety-related electrical control systems for machines. It is applicable to control systems used, either singly or in combination, to carry out safety-related control functions on machines that are not portable by hand, (including groups of machines working together in a coordinated manner).
| Committee |
EL-017
|
| DocumentType |
Standard
|
| ISBN |
0 7337 7400 8
|
| Pages |
88
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
| Standards | Relationship |
| IEC 62061:2005 | Identical |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Identical |
First published as AS 62061-2006.
| AS/NZS 61000.6.2:2002 | Electromagnetic compatibility (EMC) Generic standards - Immunity for industrial environments |
| AS 61508.3-1999 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Software requirements |
| AS 60204.1-2005 | Safety of machinery - Electrical equipment of machines General requirements (IEC 60204-1, Ed. 5 (FDIS) MOD) |
| AS 61508.2-2001 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Requirements for electrical/electronic/programmable electronic safety-related systems |
| AS/NZS 3584.1:2008 | Diesel engine systems for underground coal mines Fire protected - Heavy duty |
| AS/NZS 4240.3:2013 | Remote control systems for mining equipment Operation and maintenance for underground coal mining |
| AS/NZS 4871.1:2010 | Electrical equipment for mines and quarries General requirements |
| AS/NZS 4871.6:2013 | Electrical equipment for mines and quarries Diesel powered machinery and ancillary equipment |
| AS 4024.3002-2009 | Safety of machinery Materials forming and shearing - Hydraulic power presses |
| AS/NZS 60079.33:2012 | Explosive atmospheres Equipment protection by special protection 's' (Reconfirmed 2024) |
| AS/NZS 2081:2011 | Electrical protection devices for mines and quarries (Reconfirmed 2022) |
| AS 4024.3001-2009 | Safety of machinery Materials forming and shearing - Mechanical power presses |
| AS/NZS 3584.2:2008 | Diesel engine systems for underground coal mines Explosion protected |
| AS/NZS 1418.10:2011 | Cranes, hoists and winches Mobile elevating work platforms |
| AS/NZS 4240.1:2009 | Remote control systems for mining equipment Design, construction, testing, installation and commissioning (Reconfirmed 2021) |
| AS 3533.1-2009 | Amusement rides and devices Design and construction |
| AS/NZS 4871.6:2007 | Electrical equipment for coal mines, for use underground Diesel powered machinery and ancillary equipment |
| AS/NZS 4871.1:2012 | Electrical equipment for mines and quarries General requirements |
| AS/NZS 1826:2008 | Electrical equipment for explosive gas atmospheres - Special protection - Type of protection ‘s’ |
| AS/NZS 3584.3:2012 | Diesel engine systems for underground coal mines Maintenance |
| AS/NZS 3007:2013 | Electrical equipment in mines and quarries - Surface installations and associated processing plant |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.